石英脉型辉钼矿矿床多建造地球化学异常特征

通过对石英脉型辉钼矿床水系沉积物和区域成矿带多建造地球化学异常特征的研究,为寻找石英脉型钼矿床提供地球化学论据。     

Weathering: Toward a Fractal Quantifying

Weathering occurs over a wide range of scales. To link features through these scales is a major challenge for interdisciplinary weathering studies. Fractal approach seems to be specially useful for this purpose. We introduce a multistep fractal weathering assessment scheme devoted to extract fractal weathering classifiers from texture analysis of the mineral's image. Our scheme enables to quantitatively estimate the global and local information about the geometry of the weathering pattern. This information is basic to develop geometrical indices of weathering, which can significantly enrich the common qualitative and semiquantitative weathering assessment schemes. To justify the fractal approach, a strong statistical self-similarity has been documented for both the weathering and fresh features of two common silica minerals: quartz and biogenic A-opal (phytolith) over four orders of length scales. The procedure is fast, drastically reduces thresholding bias, promises to be universal, it is valid for genetically different minerals and rock types, scale independent, and specially useful for monitoring the changes in the mineral's roughness during the alteration. Two of the proposed classifiers seem to be potentially useful for direct application in the field and be used by nonspecialist.     

时空多点连续定向取心技术应用研究

为解决以往定向仪不抗振、岩样采取率不高等问题，利用时间与钻孔空间位置对应的关系，研制成功了KD型定向仪。详细介绍了该定向仪的基本构成、技术参数及现场应用情况。     

The role of moisture cycling in the weathering of a quartz chlorite schist in a tropical environment: findings of a laboratory simulation

Long‐term weathering of a quartz chlorite schist via wetting and drying was studied under a simulated tropical climate. Cubic rock samples (15 mm × 15 mm × 15 mm) were cut from larger rocks and subjected to time‐compressed climatic conditions simulating the tropical wet season climate at the Ranger Uranium Mine in the Northern Territory, Australia. Fragmentation, moisture content and moisture uptake rate were monitored over 5000 cycles of wetting and drying. To determine the impact of climatic variables, five climatic regimes were simulated, varying water application, temperature and drying. One of the climatic regimes reproduced observed temperature and moisture variability at the Ranger Uranium Mine, but over a compressed time scale. It is shown that wetting and drying is capable of weathering quartz chlorite schist with changes expected over a real time period of decades. While wetting and drying alone does produce changes to rock morphology, the incorporation of temperature variation further enhances weathering rates. Although little fragmentation occurred in experiments, significant changes to internal pore structure were observed, which could potentially enhance other weathering mechanisms. Moisture variability is shown to lead to higher weathering rates than are observed when samples are subjected only to leaching. Finally, experiments were conducted on two rock samples from the same source having only subtle differences in mineralogy. The samples exhibited quite different weathering rates leading to the conclusion that our knowledge of the role of rock type and composition in weathering is insufficient for the accurate determination of weathering rates. Copyright © 2005 John Wiley & Sons, Ltd.     

A new approach of single epoch GPS posi- tioning for landslide monitoring

Introduction China is a country with many landslides and debris flows. These disasters bring out a large amount of losses of life and property. It is significant to predict landslide incident by monitoring the deformations of these landslides. At past, triangulation and trilateration are traditional tools, but it is very difficult for them to realize real-time monitoring, and it is more dangerous for obser- vation workers when the deformation becomes larger. Because of many advantages such as…     

Penny-shaped fractures revisited

All methods of seismic characterization of fractured reservoirs are based on effective media theories that relate geometrical and material properties of fractures and surrounding rock to the effective stiffnesses. In exploration seismology, the first-order theory of Hudson is the most popular. It describes the effective model caused by the presence of a single set of thin, aligned vertical fractures in otherwise isotropic rock. This model is known to be transversely isotropic with a horizontal symmetry axis (HTI). Following the theory, one can invert the effective anisotropy for the crack density and type of fluid infill of fractures, the quantities of great importance for reservoir appraisal and management.Here I compute effective media numerically using the finite element method. I deliberately construct models that contain a single set of vertical, ellipsoidal, non-intersecting and non-interconnected fractures to check validity of the first-order Hudson’s theory and establish the limits of its applicability. Contrary to conventional wisdom that Hudson’s results are accurate up to crack density e ≈ 0.1, I show that they consistently overestimate the magnitudes of all effective anisotropic coefficients ε^(V), δ^(V), and γ^(V). Accuracy of theoretically derived anisotropy depends on the type of fluid infill and typically deteriorates as e grows. While the theory gives | ε^(V)|, |δ^(V)|, |γ^(V)| and close to the upper bound of the corresponding numerically obtained values for randomly distributed liquid-filled fractures, theoretical predictions of ε^(V), δ^(V) are not supported by numerical computations when the cracks are dry. This happens primarily because the first-order Hudson’s theory makes no attempt to account for fracture interaction which contributes to the final result much stronger for gas- than for liquid-filled cracks. I find that Mori-Tanaka’s theory is superior to Hudson’s for all examined crack densities and both types of fluid infill.The paper was presented at the 11th International Workshop on Seismic Anisotropy (11IWSA) held in St. John’s, Canada in 2004.     

The initiation and development of metamorphic foliation in the Otago Schist, Part 2: evidence from quartz grain-shape data

Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.     

Hydrothermal Quartz Vein Formation, Revealed by Coupled SEM-CL Imaging and Fluid Inclusion Microthermometry: Shuteen Complex, South Gobi, Mongolia

Abstract. Scanning electron microscopy-cathodoluminescence (SEM-CL) imaging of vein quartz in the Cu-mineralised, Shuteen Complex (South Gobi, Mongolia) has revealed a complex history of crystal growth, dissolution and microfracture healing, associated with several hydrothermal events that could not be detected using other observational techniques (e.g. transmitted/reflected light microscopy, back-scattered electron imaging, or secondary electron imaging).
The quartz initially grew as CL-bright/grey crystals in a 345±30C liquid reservoir, as inferred by the analysis of primary liquid fluid inclusions (average Th of 343C; 6.6∼7.7 wt% NaCl_eq). Quartz precipitation occurred at the edge of the crystals as reservoir fluids cooled to 260±25C, as indicated by micron-scale CL-dark/CL-bright quartz growth bands containing abundant fluid inclusions (with an average T_h values of 261C). Pressure fluctuations were the likely cause of dissolution, as SEM-CL imaging reveals the quartz have corroded or rounded crystal edges, and precipitation of later quartz into open space. SEM-CL imaging shows the quartz contains healed microfractures that trapped low salinity fluids (3.9 wt% NaC1_eq) with Th values of 173±15C.
SEM-CL imaging provides a means of deciphering the thermal and chemical evolution of the fossil Shuteen hydrothermal system, and the nature of hydrothermal quartz vein-forming processes, by facilitating the correlation of distinct fluid inclusion populations and their relative chronology, with specific hydrothermal events.     

钻孔灌注桩后压浆作用机理与应用

通过对桩侧和桩底后压浆,可大幅度提高钻孔灌注桩单桩承载力.应用桩-土理论分析了后压浆中浆液对土体及桩体的作用,并从分析影响桩基承载力的因素出发,研究了后压浆的作用机理.在渗透率小的地层中后压浆以压密注浆为主,在渗透率大的地层中后压浆以渗透注浆为主.为避免过分压裂土层,在压浆过程中应控制灌浆压力.压浆量是影响后压浆质量和提高单桩承载力的关键因素之一.