银川市初夏气溶胶粒子谱分布特征

利用美制APS—3310A型激光粒谱仪，在中国西北城市银川对大气气溶胶粒子进行现场观测，结合气象条件，并通过理论计算分析，给出了银川市初夏大气气溶胶的日变化特征、3种不同粒径粒子分布特点及飘尘谱分布特征，以期为银川市大气污染总量控制方案及对策提供科学依据。     

贵州寒武系底部黑色硅质岩成因及沉积环境探讨

贵州寒武系底部形成的黑色层状硅质岩，岩石展布广，层位稳定，厚度较大。硅质岩的δ^30Si值为—0．1‰～0．9‰，平均0．314‰；δ^18O值为12．8‰～21．2‰，通过δ^18O值计算出该区硅质岩形成温度82．2～162．5℃；硅质岩富含Ba、As、Sb、Bi和U，呈明显的Ce负异常。硅质岩的地球化学特征表明其主要成因是热水沉积作用。同时由于硅质岩主要是热水来源，所以在讨论其形成环境时还结合了岩相古地理的方法，指出该套硅质岩形成于深水缓坡至浅水滞流海环境之中。     

青海锡铁山热水沉积型铅锌矿床的地球化学特征

通过对锡铁山铅锌矿床的围岩(矿石)化学成分、稀土及微量元素特征的研究，发现矿区地层普遍具有铈负异常(δCe=0．47～0．90)，为海相沉积岩，近矿围岩中Ag、Hg、As、Sb、Ba等热水沉积指示元素偏高，显示成矿流体性质为热卤水，矿区火山岩不发育，矿床类型可以划为Sedex型。     

TEM法在寻找煤矿突水巷道中的应用

在地质勘探中,TEM法体积效应影响小,探测深度大,对低阻反映灵敏,因此,其作为一种物探手段,已被广泛应用于地球物理勘探的各个领域。TEM法在煤矿突水巷道勘探中,曲线形态为高电位单峰异常,这个特征用于煤矿充水巷道探测准确度高,效果明显。     

渤海湾老狼坨子海岸带^14C,^137Cs、^210Pb测年与现代沉积速率的加速趋势

通过对渤海湾西岸L剖面中同一关键层的碳酸钙和原生腹足类壳债权的^14C测年对比研究，确定了晚全新世的2800cal BP的层位及沉积速率0.045cm/a;8个样柱的^137Cs和^210Pbex强度、蓄积量揭示了距今约120年来堤后盐沼的平均沉积速率约为0.35cm/a，而面向开放海湾的潮坪上部则达到约2-3cm/a。研究区近1个世纪以来沉积速率的加速趋势，是渤海湾西岸泥质海岸带的特征之一。     

桩承载力时效对桩土相互作用及沉降的影响分析

对软土中两根47 m长灌注桩分别在成桩28 d和1 750 d后进行了承载力试验，其极限承载力提高幅度达到30％左右。分析了单桩承载力随时间提高(称为时效)的机理，提出了单桩承载力时效对桩筏基础桩土相互作用影响的分析方法，并结合工程实例进行了分析。     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

Wave-influenced deltas: geomorphological implications for facies reconstruction

ABSTRACT A process‐based facies model for asymmetric wave‐influenced deltas predicts significant river‐borne muds with potentially lower quality reservoir facies in prodelta and downdrift areas, and better quality sand in updrift areas. Many ancient barrier‐lagoon systems and ‘offshore bars’ may be better reinterpreted as components of large‐scale asymmetric wave‐influenced deltaic systems. The proposed model is based on a re‐evaluation of several modern examples. An asymmetry index A is defined as the ratio between the net longshore transport rate at the mouth (in m³ year^?1) and river discharge (in 10⁶ m³ month^?1). Symmetry is favoured in deltas with an index below ≈ 200 (e.g. Tiber, lobes of the Godavari delta, Rosetta lobe of the Nile, Ebro), whereas deltas with a higher index are asymmetric (e.g. Danube – Sf. Gheorghe lobe, Brazos, Damietta lobe of the Nile). Periodic deflection of the river mouth for significant distances in the downdrift direction occurs in extreme cases of littoral drift dominance (e.g. Mahanadi), resulting in a series of randomly distributed, quasi‐parallel series of sand spits and channel fills. Asymmetric deltas show variable proportions of river‐, wave‐ and tide‐dominated facies both among and within their lobes. Bayhead deltas, lagoons and barrier islands form naturally in prograding asymmetric deltas and are not necessarily associated with transgressive systems. This complexity underlines the necessity of interpreting ancient depositional systems in a larger palaeogeographic context.     

按不同气候背景制作单站MOS预报方程

在基层业务体制的框架基本形成以后，县局在参考上级指导预报的同时，初步开展对单站数值预报模式的研究，注意中、小尺度天气的变化规律，以提高订正预报的精度。