Basin filling evolution of the central basins of Mallorca since the Pliocene

A new compilation of data from 436 drill cores using decompaction and backstripping techniques was used to reconstruct the basin filling history from the Pliocene until the present day in the Palma, Inca and Sa Pobla Basins on the island of Mallorca (Spain). Calcareous rocks dominate the source area and provide a limited amount of clastic input to the basins that has resulted in an average accumulation rate of between 5 and 20 m/Ma during the last 5.3 Ma. Carbonate sediment production dominated the basin filling history during early‐mid Pliocene, but during the Quaternary, the sedimentation processes in the Palma Basin were probably enhanced by an evolution in the drainage network that increased the sediment supply and the accumulated thickness caused by stream capture. However, the maximum sedimentation rate filling the depocentres of the three basins has been decreasing since the Pliocene, showing that not only the catchment transport efficiency but also the relative sea level have been controlling the sediment accumulation in these carbonate basins. The isopach cross‐sections support the idea that a palaeorelief was generated during the Messinian sea level drop and that heterogeneities were filled in from the Pliocene to the Quaternary. We conclude that the central basins of Mallorca were filled heterogeneously due to tectonic and geomorphic processes that controlled sediment transport and production, resulting in different average sedimentation thicknesses that decreased since the Pliocene as the accommodation space became filled and the relative sea level dropped.     

Extensional fault and fold growth: Impact on accommodation evolution and sedimentary infill

Extensional faults and folds exert a fundamental control on the location, thickness and partitioning of sedimentary deposits on rift basins. The connection between the mode of extensional fault reactivation, resulting fault shape and extensional fold growth is well‐established. The impact of folding on accommodation evolution and growth package architecture, however, has received little attention; particularly the role‐played by fault‐perpendicular (transverse) folding. We study a multiphase rift basin with km‐scale fault displacements using a large high‐quality 3D seismic data set from the Fingerdjupet Subbasin in the southwestern Barents Sea. We link growth package architecture to timing and mode of fault reactivation. Dip linkage of deep and shallow fault segments resulted in ramp‐flat‐ramp fault geometry, above which fault‐parallel fault‐bend folds developed. The folds limited the accommodation near their causal faults, leading to deposition within a fault‐bend synclinal growth basin further into the hangingwall. Continued fold growth led to truncation of strata near the crest of the fault‐bend anticline before shortcut faulting bypassed the ramp‐flat‐ramp structure and ended folding. Accommodation along the fault‐parallel axis is controlled by the transverse folds, the location and size of which depends on the degree of linkage in the fault network and the accumulated displacement on causal faults. We construct transverse fold trajectories by tracing transverse fold hinges through space and time to highlight the positions of maximum and minimum accommodation and potential sediment entry points to hangingwall growth basins. The length and shape of the constructed trajectories relate to the displacement on their parent faults, duration of fault activity, timing of transverse basin infill, fault linkage and strain localization. We emphasize that the considerable wavelength, amplitudes and potential periclinal geometry of extensional folds make them viable targets for CO₂ storage or hydrocarbon exploration in rift basins.     

土壤粒径的光谱响应特性研究

以实验室制备的5个不同粒径水平的土壤样本和室内高光谱数据为基础,通过对光谱数据进行重采样、数学变换等预处理并进行单因素方差分析、相关性分析和回归分析,探讨土壤粒径的高光谱特性,建立了光谱数据预测土壤粒径的校正模型。结果表明,土壤粒径对反射光谱有显著的影响,波长越长影响越大;在全波段范围内土壤粒径和光谱数据都呈负相关关系,对原始光谱数据进行微分变换能增加其与土壤粒径的相关性;以反射率一阶微分建立的回归模型为反演土壤粒径的最佳模型,其建模决定系数■、预测决定系数■、预测相对偏差RPD分别为0.666,0.653,2.043,预测均方根误差RMSE为0.175。     

PDR算法对地磁室内定位精度的提升研究

利用建筑物中金属结构引起的地磁场扰动可以对室内的行人目标进行定位,而且基于地磁场的定位无需布设任何额外设施,因此可以以低成本实现定位。但仅靠单一的地磁技术无法满足室内定位的精度要求。为了解决磁场数据中单点定位的模糊性问题,本文提出了一种利用粒子滤波算法将PDR与地磁相融合的室内定位方法,并开发了地磁室内导航系统,以智能手机为硬件平台构建磁力计传感器模型,建立匹配轨迹的均方误差准则并实现PDR累积误差实时校正的迭代计算。在68 m×1.8 m的试验区域内,产生的平均定位误差为1.13 m,最大定位误差为2.17 m。本文算法的定位精度比单独PDR算法提升了42%;与单一地磁指纹匹配算法相比,定位精度提高了57%。试验证明,本文提出的融合算法对提高室内定位精度具有显著的作用。     

改进分数阶达尔文粒子群的多Renyi熵图像分割算法

针对智能优化图像分割算法易陷入局部最优、分割精度不高等问题,本文融合改进的分数阶达尔文粒子群算法和二维Renyi熵多阈值,提出了一种新的多阈值遥感图像分割算法。算法利用粒子自身进化信息来定义进化因子,结合进化因子并利用高斯图函数调整分数阶次a系数以实现精确计算和快速收敛;根据局部最优概率因子对局部最优位置进行Levy飞行随机扰动以提高算法跳出局部最优的能力;同时将二维Renyi熵单阈值扩展到多阈值分割上,并结合改进的分数阶达尔文粒子群算法,将二维Renyi熵多阈值应用于遥感图像分割中仿真结果表明,与其他2种智能优化分割算法相比,本文分割算法在细节处理和分割精度上均有明显优势,在PRI上至少提升7.27%、VOI至少降低6.5%、GCE至少降低10.4%.     

顾及有色噪声的自适应粒子滤波UWB定位算法

传统卡尔曼滤波算法要求噪声模型符合高斯分布,在UWB室内定位中,由于载体本身的机制等干扰,观测噪声不仅仅是白噪声,也存在有色噪声的情况,而粒子滤波可以处理有色噪声的问题。本文通过增加似然分布自适应调整来改进粒子滤波用于目标跟踪的精度,同时研究在白噪声、有色噪声下似然分布自适应调整粒子滤波和拓展卡尔曼滤波在UWB中的优势与不同。试验结果表明：观测噪声为白噪声时,拓展卡尔曼滤波和粒子滤波均可以较好地实现对行人的定位跟踪;观测噪声为有色噪声时,自适应粒子滤波定位效果优于粒子滤波、拓展卡尔曼滤波。     

基于GPS和水准数据的微粒群算法联合反演祁连山北缘断裂三维滑动速率

将微粒群算法与位错理论模型相结合,采用中国地壳运动观测网络提供的青藏高原地区2001~2004年GPS测量数据和2000~2006年水准测量数据,通过常规定权和附有相对权比的方法对祁连山北缘断裂的三维滑动速率进行联合反演,并与蚁群算法反演结果进行对比。结果表明,微粒群算法收敛速度快、稳定性高,结合经典位错理论模型,是一种可以有效求解断层三维滑动速率反演问题的优化算法,在大地测量反演领域极具应用潜力。     

一种变形监测中中长基线的单历元模糊度解算算法

针对已有单历元模糊度解算算法只适用于短基线的情形,根据误差传播率确定模糊度精度,依据误差确定模糊度搜索空间,提出一种利用GPS双频观测信息实现中长基线下单历元模糊度固定的算法。首先,利用电离层约束法得到双差模糊度之间的线性约束条件;其次,利用变形监测中监测站点坐标近似已知的条件进行约束,反算获得近似模糊度;最后,根据监测站点已有的观测数据精度给出搜索空间,搜索固定模糊度。结果表明,该方法可以实现中长基线下单历元的模糊度固定,对实时变形监测有一定的参考价值。     

海底爆破振动强度衰减规律及中华白海豚保护措施研究

为确保海底爆破施工所诱发的振动不对中华白海豚造成危害,基于量纲分析法对萨道夫斯基经验公式进行修正,建立适用于预测海底爆破质点峰值振动速度的相似准数方程。在此基础上根据现场试验数据进行非线性回归运算,得到相关参数并分析了海底爆破振动强度衰减规律。分析表明:海底爆破质点峰值振速主要由单段装药量、监测点距爆心水平距离、覆盖层厚度及海水深度等因素决定。将参数值分别代入萨氏公式及新建公式计算预测值并进行误差估计,其平均误差分别为20.3%和10.0%,新建公式提高了对质点振速预测的准确性。利用新建公式及超压内安全振速估算保护中华白海豚的安全距离并提出相应的保护措施,为同类工程施工提供理论参考依据。     

碎冰条件下单点系泊船舶动态响应特性研究

为了研究不同单点系泊位置对极地系泊船舶在来冰角度改变时动态响应的影响,运用离散元方法(DEM),计算了船舶在60%密集度下,冰速为1.0 m/s、冰厚为1 m时不同角度的船冰阻力,结合系泊分析软件二次开发功能,计算分析系泊船舶在不同来冰角度和不同系泊位置下受上述冰情影响下的响应。通过对模拟结果与试验结果的对比,认为离散元方法(DEM)的数值模拟结果与试验结果吻合较好;单点系泊位置为距船头L/4时,系泊船舶能以最快速、最稳定的方式对来冰方向的变化做出响应。