时空多点连续定向取心技术应用研究

为解决以往定向仪不抗振、岩样采取率不高等问题，利用时间与钻孔空间位置对应的关系，研制成功了KD型定向仪。详细介绍了该定向仪的基本构成、技术参数及现场应用情况。     

江汉--洞庭湖平原区构造沉降GPS监测的试验与研究

地质构造沉降是地壳的一个长期、缓慢运动过程。开展区域性地质构造沉降GPS监测研究，对地质调查具有十分重要的意义。介绍了高精度GPS高程测量在江汉～洞庭湖平原区构造沉降观测中的数据处理方法，并得出了一些有益的结论。     

Dust production and the release of iron oxides resulting from the aeolian abrasion of natural dune sands

Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg^?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.     

Testing a statistical curve‐fitting procedure for quantifying sediment populations within multi‐modal particle‐size distributions

This paper describes a series of tests designed to evaluate the capacity of a personal computer (PC) based statistical curve‐fitting program called MIX to quantify composite populations within multi‐modal particle‐size distributions. Three natural soil samples were analysed by a Coulter Multisizer, and their particle‐size distributions analysed using MIX software to identify the modes, standard deviations and proportions of their composite populations. The particle‐size distributions of the three natural soil samples were then numerically combined in equal proportions using a spreadsheet program to create synthetic particle‐size distributions of known populations. MIX was then tested on the synthetic particle‐size distributions to see if the modes and proportions it identified were similar to those modes and proportions known to characterize the synthetic particle‐size distributions. The main outcome is that MIX can very accurately describe the modal particle size and proportions of the major composite populations within a particle‐size distribution. However MIX has difficulty in identifying small populations (those contributing <10 per cent of a total particle‐size distribution), particularly when they are located in the central sections of particle‐size distributions, overlain by larger populations, or when positioned in the fine tails of distributions. Despite these minor shortcomings, MIX is a valuable tool for the examination and interpretation of particle‐size data. Copyright © 2005 John Wiley & Sons, Ltd.     

A new approach of single epoch GPS posi- tioning for landslide monitoring

Introduction China is a country with many landslides and debris flows. These disasters bring out a large amount of losses of life and property. It is significant to predict landslide incident by monitoring the deformations of these landslides. At past, triangulation and trilateration are traditional tools, but it is very difficult for them to realize real-time monitoring, and it is more dangerous for obser- vation workers when the deformation becomes larger. Because of many advantages such as…     

Penny-shaped fractures revisited

All methods of seismic characterization of fractured reservoirs are based on effective media theories that relate geometrical and material properties of fractures and surrounding rock to the effective stiffnesses. In exploration seismology, the first-order theory of Hudson is the most popular. It describes the effective model caused by the presence of a single set of thin, aligned vertical fractures in otherwise isotropic rock. This model is known to be transversely isotropic with a horizontal symmetry axis (HTI). Following the theory, one can invert the effective anisotropy for the crack density and type of fluid infill of fractures, the quantities of great importance for reservoir appraisal and management.Here I compute effective media numerically using the finite element method. I deliberately construct models that contain a single set of vertical, ellipsoidal, non-intersecting and non-interconnected fractures to check validity of the first-order Hudson’s theory and establish the limits of its applicability. Contrary to conventional wisdom that Hudson’s results are accurate up to crack density e ≈ 0.1, I show that they consistently overestimate the magnitudes of all effective anisotropic coefficients ε^(V), δ^(V), and γ^(V). Accuracy of theoretically derived anisotropy depends on the type of fluid infill and typically deteriorates as e grows. While the theory gives | ε^(V)|, |δ^(V)|, |γ^(V)| and close to the upper bound of the corresponding numerically obtained values for randomly distributed liquid-filled fractures, theoretical predictions of ε^(V), δ^(V) are not supported by numerical computations when the cracks are dry. This happens primarily because the first-order Hudson’s theory makes no attempt to account for fracture interaction which contributes to the final result much stronger for gas- than for liquid-filled cracks. I find that Mori-Tanaka’s theory is superior to Hudson’s for all examined crack densities and both types of fluid infill.The paper was presented at the 11th International Workshop on Seismic Anisotropy (11IWSA) held in St. John’s, Canada in 2004.     

长江口沉积物210Pb分布及沉积环境解释

在长江河口潮滩、分流河道和水下三角洲共获得18个柱样,进行沉积学分析和210Pb测定,并对其中6根柱样进行137Cs测定。经研究发现,长江口外在水深25～30m,122°30′N,31°00′E附近存在一个泥质沉积中心,沉积速率达2.0～6.3cm/yr。另外,在潮滩和涨潮槽也获得较高沉积速率,其中南汇和横沙岛潮滩沉积速率(1.03～1.94cm/yr)高于崇明东滩(0.51～0.76cm/yr),涨潮槽沉积速率也达0.86cm/yr。此外,在石洞口、南汇、九段沙潮滩和三角洲前缘有部分柱样未获沉积速率,推测为沉积环境不稳定或沉积速率过快所致。     

长江口沉积物~(210)Pb分布及沉积环境解释

在长江河口潮滩、分流河道和水下三角洲共获得18个柱样,进行沉积学分析和210Pb测定,并对其中6根柱样进行137Cs测定。经研究发现,长江口外在水深25～30m,122°30′N,31°00′E附近存在一个泥质沉积中心,沉积速率达2.0～6.3cm/yr。另外,在潮滩和涨潮槽也获得较高沉积速率,其中南汇和横沙岛潮滩沉积速率(1.03～1.94cm/yr)高于崇明东滩(0.51～0.76cm/yr),涨潮槽沉积速率也达0.86cm/yr。此外,在石洞口、南汇、九段沙潮滩和三角洲前缘有部分柱样未获沉积速率,推测为沉积环境不稳定或沉积速率过快所致。     

SEDIMENT TRANSPORT, DELTA GROWTH AND SEDIMENTATION IN LAKE NIGARDSVATN, NORWAY

ABSTRACT. The retreat of Nigardsbreen, an outlet glacier from the ice-cap Jostedalsbreen in south-central Norway, from its largest extent during the Little Ice Age, uncovered a proglacial lake during 1936–1967. This lake, Nigardsvatn, has been studied since 1968 in order to obtain data on solid material carried by the meltwater stream from the glacier, both in suspension and as bottom load. Between 70 and 85% of the suspended sediment has been deposited on the lake bottom, forming annual varves. The coarse material has been deposited in a delta, the formation of which started in 1968. Its growth, and hence the volume of total annual bottom load, has been surveyed annually for the past 36 years. In 1969 the entire bottom load was collected by building a fence-like net across the river. Material >3 cm was caught by this net, and formed approximately half the amount of suspended sediment transport during the same three-week period. Annual average deposition on the delta was 11800×10³ kg for the period 1968–2003. This is almost the same amount as carried in suspension from the glacier on an annual mean basis for the 36-year period. If conditions remain constant, the lake will be completely filled in about 500 years. The glacier erosion is calculated to be 0.3 mm/a.