Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…     

A new method for testing pile by sin- gle-impact energy and P-S curve

Introduction Through many year's practices by vast numbers of scientific and technological workers andefforts from all aspects, the dynamic testing method of high-low strain has formally entered intothe technical code of foundation pile test of construction at last (The Industry Standards of thePeople's Republic of China, 2003). The striking mode of the dynamic testing method of high strainis stipulated as hammer in the code, the striking of rocket can also be used. The latter is widely…     

中国新疆博斯腾湖全新世沉积环境年代学特征

通过对博斯腾湖沉积物湖芯样品进行137Cs,14C-AMS测年分析,湖芯剖面上有明显的1986年的切尔诺贝利核事故蓄积峰,以及1975年和1963年次蓄积峰,这些137Cs蓄积峰对博斯腾湖现代沉积有明显的时标意义。通过质量深度与年代分析,博斯腾湖的沉积速率相对稳定,平均沉积速率为0.13±0.01g/cm2.a。与14C年代获得的中全新世以来的平均沉积速率0.13±0.03cm/a和0.12±0.05cm/a相似,表明博斯腾湖中全新世以来的沉积环境较稳定,并且也说明14C-AMS测年分析所得的结果较为可靠,可以利用博斯腾湖沉积物样品测定的14C年代进行线性回归作年代校正,由于湖泊沉积物中老碳效应的影响,博斯腾湖沉积物有机质14C测年偏老约650a左右。     

北京市春夏季大气气溶胶的单颗粒分析表征

采集了北京市2000年春夏季大气气溶胶样品5个，采用扫描电镜X射线能谱技术分析大气气溶胶单颗粒约2500个。研究结果表明，沙尘期间，矿物尘是最主要的颗粒物种类，非沙尘期间，北京市大气气溶胶中主要检出矿物尘和含硫颗粒物。夏季随着颗粒物污染的加重，含硫颗粒物的数目百分数增加。是北京市大气颗粒物污染的重要特征。重点讨论了Ca-S颗粒、K-S颗粒和Ca-K-S颗粒三类典型含硫颗粒物的化学组成和粒径分布特征。数目可观的Ca-K-S颗粒以及其他硫酸盐颗粒的生成与相对湿度和云量等气象条件相关，这些颗粒物可能是云中过程的产物。减少SO2排放，减少含硫颗粒物，对于控制北京市的大气颗粒物浓度水平具有重要意义。     

采用DPIV技术研究浅水平板岛屿尾流

人们对于尾流的研究大都针对绕流体在展向非常长的情形,但是在天然环境和水利工程中出现的多为水深相对很浅的流动。由于槽底和自由水面的限制,浅水域中的尾流有着与深水尾流不同的流动规律。采用数字粒子图像测速(DPIV)技术,在长30m、宽3.5m、高1m的水槽中比较系统地量测了浅水中绕平板岛屿的尾流区流场。分析了大尺度旋涡的运动规律,得到了尾流流动形式随尾流稳定性参数的变化规律。目前如此大尺度浅水岛屿尾流的定量实验研究并不多见。     

洪山泉流量动态系统分析

为查明洪山泉域的开采程度,在前人研究基础上,建立了现阶段泉流量-降雨量的线性模拟模型。通过对模型的系统辨识,对系统的"慢时变"现象作出了合理解释,并发现系统在1994年以后发生了"快时变",说明开采量从1995年开始迅猛增加。同时,由多年来泉流量序列的自相关分析,发现其宏观周期到2000年基本保持不变,说明虽然第二输入(即人为开采量)对该系统的作用已不可忽略,但尚未达到足以改变其宏观频率的程度。     

广西环江县北山地区喷流沉积铅锌矿资源潜力及找矿方向

环江县北山地区铅锌矿均富集在同一地层层位——中上泥盆统，五圩—川山—驯乐NNE向深断裂控制着成矿带，矿床存在大量沉积成岩成矿组构，喷流沉积特征明显。其成矿地质背景、沉积相、礁硅岩套建造、同生断裂活动、赋矿层位等与邻区丹池锡一铅锌多金属矿集区类似，有巨大找矿潜力。     

镇旬铅锌矿田热水沉积硅岩研究

从镇(安)旬(阳)铅锌矿田热水沉积硅岩的产状、形态、岩石结构、构造、矿物成分、化学成分、微量元素、稀土元素、硫同位素、氧同位素等研究表明，本区硅岩具有以热液为主兼有生物和正常沉积的特征，并非典型热水沉积岩。     

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.     

Blast Induced Damage and Dynamic Behaviour of Hangingwalls in Bench Stoping

This paper presents the results of a comprehensive monitoring program designed to investigate the extent of blast induced damage experienced by rock masses extracted by bench stoping methods. An array of triaxial geophones and extensometers were used to monitor blast vibration attenuation and measure hangingwall deformations during stope extraction. In addition, pre and post surveys of the hangingwall rock mass were conducted using a TV borehole camera and cavity survey instrumentation. These surveys were later used to calibrate damage profiles into the stope hangingwalls.

Peak particle velocity, hangingwall deformation measurements and stope surveys were used to develop a site specific damage model that allowed engineers to asses drilling and blasting configurations to minimise the extent of pre-conditioning and damage. In addition the study included the analysis of the frequency response, displacements and accelerations experienced by the excavation as extraction and mine filling progressed. This work aimed at improving our understanding of the influence of blasting on the dynamic behaviour of stope hangingwalls.

The study demonstrated that estimates of the maximum extent of rock mass pre-conditioning and/or damage made through the application of the Holmberg-Persson approach compared well with measured results. In addition, the study found that dynamic loading imparted on an exposed hangingwall from subsequent stope blasting was also expected to contribute to rock mass weakening and that mine filling was crucial to arrest further deterioration. Hangingwall accelerations were used to demonstrate that larger openings may be more susceptible to dynamic loading.