上海现阶段主要沉降层及其变形特征分析

以上海地质条件为基础，根据最近十几年分层标和含水层水位观测资料分析了上海地面沉降的主要沉降层，分析结果表明目前上海的主要沉降层是第五砂层。从第五砂层水位与时间的关系、变形与时间的关系和水位与变形的关系出发，结合室内实验的结果，指出第五砂层的变形特征是地下水位在一定范围内反复上升-下降时，变形以弹性为主、一般情况下则以塑性变形为主、应力应变关系为非线性以及存在蠕变变形。在建立地面沉降模型时必须考虑含水砂层的这些变形特点。     

浅议反射法混凝土厚度检测

隧道衬砌、路道、路面楼板等只有一个检测面,冲击回波法成为新的厚度及缺陷检测方法.由冲击回波法与基桩反射法的共性及特性揭示了这种方法的机理及频域与时域检测2种不同施测方法以及对激振的不同要求.用惠更斯菲涅尔带分析了水平分辨率,最后说明该种方法的技术关键.     

波浪作用下沙纹床面底层流动特性研究

涡动沙纹很大程度决定着床面阻力和波浪衰减,针对涡动沙纹作用下的绕流结构具有强二维特性,建立了立面二维曲线坐标下的数值模型.利用国外公开发表的试验数据进行验证,表明模型能模拟波浪作用下底层分离涡随时间、空间变化的动力特性,对底层流动的紊动特性、床面剪切应力的随时间、空间的变化以及涡动结构的尺度分别进行了讨论.     

青藏高原周缘地区大地震发生的地球物理条件的新认识

青藏高原周缘是我国的主要强震区之一，也是地球物理场变异带和地壳陡变带，前人研究的结果表明强震的发生与它们有密切的关系。在前人研究的基础上经过仔细分析，认为强震往往发生在地球物理场变异带和地壳陡变带等值线由密集变为舒缓或斜坡带上，这可为地震地点的预测、潜在震源区的划分、地震参数的确定，提供基本的必要条件。     

Crustal structure beneath the Songpan—Garze orogenic belt

The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

Pn arrivals and lateral variations of Moho geometry beneath the Kaapvaal craton

Pn arrivals from mining-induced earthquakes on the edge of the Witwatersrand basin show that the P wavespeeds in the uppermost mantle are almost constant throughout most of the Kaapvaal craton. The presence of only small wavespeed variations allows the use of a simple method of estimating crustal thicknesses below the stations of the Kaapvaal broad-band network using Pn times that has been compared with results from receiver functions. One thousand three hundred thirty-seven Pn arrivals were used to derive crustal thicknesses at 46 stations on the Kaapvaal craton. The average crustal thicknesses for 19 centrally located stations on each of the northern and southern regions of the craton that yielded well-constrained thicknesses were 50.52±0.88 km and 38.07±0.85 km, respectively. In contrast, the corresponding average thicknesses determined from receiver functions were 43.58±0.57 km and 37.58±0.70 km, respectively. The systematically lower values for receiver functions in the northern part of the Kaapvaal craton that was affected by the Bushveld magmatism at 2.05 Ga, suggest that the receiver functions do not enable the petrological crust mantle boundary to be reliably resolved due to variations in composition and metamorphic grade in a mafic lower crust. The Pn times also suggest pervasive azimuthal anisotropy with maximum wavespeeds of about 8.40 km/s at azimuths of about 15° and 217° in the northern and southern regions of the craton, respectively, and minimum wavespeeds of about 8.25 km/s.     

Simulation of marine boundary layer characteristics using a 1-D PBL model over the Bay of Bengal during BOBMEX-99

The characteristic features of the marine boundary layer (MBL) over the Bay of Bengal during the southwest monsoon and the factors influencing it are investigated. The Bay of Bengal and Monsoon Experiment (BOBMEX) carried out during July–August 1999 is the first observational experiment under the Indian Climate Research Programme (ICRP). A very high-resolution data in the vertical was obtained during this experiment, which was used to study the MBL characteristics off the east coast of India in the north and south Bay of Bengal. Spells of active and suppressed convection over the Bay were observed, of which, three representative convective episodes were considered for the study. For this purpose a one-dimensional multi-level PBL model with a TKE-ε closure scheme was used. The soundings, viz., the vertical profiles of temperature, humidity, zonal and meridional component of wind, obtained onboard ORV Sagar Kanya and from coastal stations along the east coast are used for the study. The temporal evolution of turbulent kinetic energy, marine boundary layer height (MBLH), sensible and latent heat fluxes and drag coefficient of momentum are simulated for different epochs of monsoon and monsoon depressions during BOBMEX-99.The model also generates the vertical profiles of potential temperature, specific humidity, zonal and meridional wind. These simulated values compared reasonably well with the observations available from BOBMEX.     

南海上层海洋热结构的年循环与半年循环

根据南海季风试验(SCSMEX)期间南海内区的三个ATLAS(Autonomous Temperature Line Acquisition System)锚碇浮标资料(1998年4月～1999年4月),采用谐波分析方法对南海上层海洋水温年循环、半年循环加以分离,发现无论在年循环还是在半年循环尺度上,18°N附近SCS1站与13°N附近SCS3站的水温变化次表层与表层呈反位相;15°20′N附近SCS2站水温变化基本上次表层与表层同位相.这说明不同区域上层海洋热变化受不同的正压与斜压模态控制.其次,SCS2、SCS3两点水温年循环振幅均在次表层达到极值;而SCS1在表层达到极大值,在100 m深度达到次极大值.3个站位水温半年循环振幅极值均出现在次表层内,这说明该层内的水温半年循环在温度变化趋势中所占的权重比在表层的权重大.