方斑东风螺两种养殖模式的比较

在室内水泥池，利用沙层自净养殖模式和直接铺沙养殖模式对不同规格的方斑东风螺（Babylonia areolata Link）进行了高密度养殖的研究。结果表明，沙层自净养殖模式养殖小螺、中螺、大螺组日均增重分别为0．031、0．088、0．098g／d，沙层NH4^＋-N最高含量ω分别为1．3、2．1、3．1mg,／L,H2S最高含量ω分别为0．03、0．07、0．14mg／L．各规格组东风螺保持正常生长和活动，成活率92．9％以上；直接铺沙养殖模式养殖小螺、中螺、大螺日均增重分别为：0．023、0．051、0．068g／d．成活率分别为95．2％、86．7％、84．9％，沙层NH4^＋-N最高含量ω达到13．7mg／L，H2S最高含量ω达到0．47mg／L，沙层底质恶化，东风螺活动异常、不摄食。可见，沙层自净养殖模式对方斑东风螺的生长、成活率、沙层水质控制效果显著，在一定程度上克服了直接铺沙养殖底质恶化问题。     

Generalized Born scattering of elastic waves in 3-D media

It is well known that when a seismic wave propagates through an elastic medium with gradients in the parameters which describe it (e.g. slowness and density), energy is scattered from the incident wave generating low-frequency partial reflections. Many approximate solutions to the wave equation, e.g. geometrical ray theory (GRT), Maslov theory and Gaussian beams, do not model these signals. The problem of describing partial reflections in 1-D media has been extensively studied in the seismic literature and considerable progress has been made using iterative techniques based on WKBJ, Airy or Langer type ansätze. In this paper we derive a first-order scattering formalism to describe partial reflections in 3-D media. The correction term describing the scattered energy is developed as a volume integral over terms dependent upon the first spatial derivatives (gradients) of the parameters describing the medium and the solution. The relationship we derive could, in principle, be used as the basis for an iterative scheme but the computational expense, particularly for elastic media, will usually prohibit this approach. The result we obtain is closely related to the usual Born approximation, but differs in that the scattering term is not derived from a perturbation to a background model, but rather from the error in an approximate Green's function. We examine analytically the relationship between the results produced by the new formalism and the usual Born approximation for a medium which has no long-wavelength heterogeneities. We show that in such a case the two methods agree approximately as expected, but that in a media with heterogeneities of all wavelengths the new gradient scattering formalism is superior. We establish analytically the connection between the formalism developed here and the iterative approach based on the WKBJ solution which has been used previously in 1-D media. Numerical examples are shown to illustrate the examples discussed.     

粉煤灰湿陷变形的三轴试验和计算

采用双压力室三轴仪对粉煤灰试样进行了单线法湿陷试验,研究了在静水压力作用以及在不同应力状态和应力水平下粉煤灰湿陷变形的规律,得出了粉煤灰湿陷变形的经验计算公式.提出了计算粉煤灰地基湿陷变形的"全应变曲线"增量有限元法.基于本文的试验结果,对一个粉煤灰地基的湿陷变形进行了有限元计算.     

应用选权拟合法建立单历元伪距和载波相位双差模型

本文根据选权拟合法的一个重要性质:只要被约束的那部分参数估值无偏,其余的参数估值也无偏;该性质说明利用选权拟合进行参数估计的结果是条件无偏的。这个不同于一般正则化解的重要特性可以建立单历元伪距和载波相位双差模型,并通过实例验证了该方法的可行性。     

基于多GPU的Harris角点检测并行算法

提出了一种基于多图形处理器(graphic processing unit,GPU)设计思想的Harris角点检测并行算法,使用众多线程将计算中耗时的影像高斯卷积平滑滤波部分改造成单指令多线程(single instruction multi-ple thread,SIMT)模式,并采用GPU中共享存储器、常数存储器和锁页内存机制在统一计算设备架构(com-pute unified device archetecture,CUDA)上完成影像角点检测的全过程。实验结果表明,基于多GPU的Har-ris角点检测并行算法比CPU上的串行算法可获得最高达60倍的加速比,其执行效率明显提高,对于大规模数据处理呈现出良好的实时处理能力。     

CorelDRAW X5中基于VBA实现线渐变的技术研究

主要介绍在CorelDRAW X5中通过VBA的程序开发环境下实现线渐变的方法,通过开发出河流渐变工具,以单线河流渐变为例,解决了通过CorelDRAW X5进行地图制图过程中遇到的单线河流渐变的问题。     

Absorption properties of urban/suburban aerosols in China

The broadband diffuse radiation method is improved to retrieve the aerosol refractive index imaginary part （AIP） and broadband （400-1000 nm mean） single scattering albedo （SSA）. In this method, four sets of SSA selection criteria are proposed for quality control. The method is used to retrieve AIP, SSA and absorptive optical thickness （AbOT） from routine hourly-exposed pyrheliometer and paranometer measurements over 11 sites （meteorological observatories） in China during 1998-2003. Apart from one suburban site （Ejin Qi）, the other urban sites are all located around big or medium cities. As shown in the retrieval results, annual mean SSA during 1998-2003 changes from 0.941 （Wuhan） to 0.849 （Lanzhou）, and AIP from 0.0054 to 0.0203. The 11-site average annual mean SSA and AIP are 0.898 and 0.0119, respectively. SSA during winter is smaller for most sites. There is an evidently positive correlation between SSA and aerosol optical thickness （AOT） for all sites. There is also a positive correlation between SSA and relative humidity for most sites, but a negative correlation for a few sites, such as Kashi and ǚrǚmqi in Northwest China.     

赣南漂塘钨矿花岗岩成岩年龄与成矿年龄的精确测定

漂塘钨矿是赣南著名的钨锡多金属矿床,由漂塘本区、木梓园和大龙山三个矿段组成。多年以来,有关漂塘花岗岩成岩年龄,大多是利用邻近的西华山花岗岩的数据进行推断,而已有的年龄测试数据精度很难保证。对该矿床的成矿年龄则报道更少。本文利用单颗粒锆石U-Pb法对漂塘本区和木梓园的成矿花岗岩进行定年,获得了两条很好的U-Pb年龄谐和线,漂塘本区和木梓园成矿花岗岩的年龄分别为161.8±1Ma和 153.3±1. 9Ma。利用矿石中的白云母40Ar/39Ar同位素定年获得了漂塘本区成矿年龄为152±1.9Ma,利用矿石中的辉钼矿Re-Os同位素定年获得木梓园成矿年龄为151.1±8.5Ma。 以上年龄数据表明,矿床的成矿作用或与花岗岩侵位基本同时发生,或稍晚于花岗岩。赣南其他矿集区的一些代表性钨矿如淘锡坑、大吉山等的成矿与成岩也有这两种情况,可见这种成矿方式在赣南地区具有代表性。本文的年龄测定和近年来发表的一些年龄数据表明,赣南钨锡矿床属于华南燕山中期第一阶段陆壳重熔型花岗岩类大规模活动及其伴随的钨锡等金属大规模成矿作用的产物。     

基于正演模拟的复合曲流带砂体内部构型解剖研究及应用

Q油田是渤海大型河流相沉积的稠油油田,其北区NmⅣ1主力含油砂体为复合曲流带沉积,经过16年的注水开发,油水关系复杂,平面注水受效不均的问题日益严重,如何优化注釆结构来改善开发效果已成为急需解决的问题。优化现有注釆井网的关键是认识复合曲流带砂体内部不同单河道砂体的切叠关系及展布特征,即对目标砂体开展内部不同单河道的构型单元分布特征研究。首先,依据岩电标定的测井曲线特征、局部发育的薄夹层以及曲流河纵向下切模式,对复合砂体内部不同单河道砂进行划分与对比;然后基于单井沉积微相划分结果,开展井间剖面相对比分析,表明复合砂体内部存在5种不同单河道砂体切叠模式;建立5种正演概念模型,利用地震正演模拟合成地震记录,总结了不同单河道砂体间顶面高程差异、点坝边界、废弃河道等曲流河砂体构型边界的波形特征;利用地震属性提取及多种地质构型方法,综合分析,最终实现了海上大井距条件下复合曲流带砂体内部不同单一曲流河砂体构型边界的精细识别;最后由注采动态资料的响应关系评估不同的切叠模式对注水效果的侧向遮挡程度,并以此为依据,优化现有的注釆井网并取得了非常好的生产效果。     

Basaltic and Solution Reference Materials for Iron,Copper and Zinc Isotope Measurements

Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ⁵⁶Fe = 0.83 ± 0.07 and δ⁵⁷Fe = 1.20 ± 0.13, δ⁶⁵Cu = 0.57 ± 0.06, and δ⁶⁶Zn = ?0.79 ± 0.12 and δ⁶⁸Zn = ?1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ⁵⁶Fe = 0.15 ± 0.07, δ⁵⁷Fe = 0.22 ± 0.10, δ⁶⁵Cu = 0.12 ± 0.08, δ⁶⁶Zn = 0.17 ± 0.13, and δ⁶⁸Zn = 0.34 ± 0.26 (2s).