A qualitative and quantitative evaluation of experimental model catchment evolution

Due to the geological time scales required for observation of catchment evolution, surrogates or analogues of field data are necessary to understand long‐term processes. To investigate long‐term catchment behaviour, two experimental model catchments that developed without rigid boundaries under controlled conditions are examined and a qualitative and quantitative analysis of their evolution is presented. Qualitatively, the experimental catchments have the visual appearance of field scale data. Observation demonstrates that changes in catchment shape and network form are conservative. Quantitative analysis suggests that the catchments reach an equilibrium form while a reduction in the channel network occurs. While the catchments are laboratory scale models, the results provide insights into field scale behaviour. Copyright © 2003 John Wiley & Sons, Ltd.     

Upscaling of elastic properties for large scale geomechanical simulations

Large scale geomechanical simulations are being increasingly used to model the compaction of stress dependent reservoirs, predict the long term integrity of under‐ground radioactive waste disposals, and analyse the viability of hot‐dry rock geothermal sites. These large scale simulations require the definition of homogenous mechanical properties for each geomechanical cell whereas the rock properties are expected to vary at a smaller scale. Therefore, this paper proposes a new methodology that makes possible to define the equivalent mechanical properties of the geomechanical cells using the fine scale information given in the geological model. This methodology is implemented on a synthetic reservoir case and two upscaling procedures providing the effective elastic properties of the Hooke's law are tested. The first upscaling procedure is an analytical method for perfectly stratified rock mass, whereas the second procedure computes lower and upper bounds of the equivalent properties with no assumption on the small scale heterogeneity distribution. Both procedures are applied to one geomechanical cell extracted from the reservoir structure. The results show that the analytical and numerical upscaling procedures provide accurate estimations of the effective parameters. Furthermore, a large scale simulation using the homogenized properties of each geomechanical cell calculated with the analytical method demonstrates that the overall behaviour of the reservoir structure is well reproduced for two different loading cases. Copyright © 2004 John Wiley & Sons, Ltd.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

利用高分辨率卫星影像进行地震损失评价所需的城市特征识别

高分辨率卫星影像已经在一些国家的民用领域得到应用。利用高分辨率卫星影像来收集地震损失评价所需要的各类城市信息不仅高效和有较好的时间分辨率，而且它可以减少以往所必需的大量的代价高昂且费力的城市调查。基于在印度城市台拉登所做的研究，讨论了如何利用高分辨率卫星影像进行城市特征识别的一些问题，同时也简单论述了利用GIS／RS软件综合所得的数据以便用于地震损失评价的方法。     

遥感影像三维可视化研究

利用DEM高程资料实现遥感影像的三维显示可大大提高遥感监测产品的使用价值，而商用软件成本高操作繁琐普及困难。利用计算机图形学知识和Delphi编程语言，开发了一套遥感影像三维可视化软件。对在开发过程中遇到的有关DEM数据的裁剪与拼接、图像配准、地表模拟、透视变换、消隐处理、光照和阴影效果以及颜色变换等问题的解决方案和实现方法作了简要的介绍。     

Experimental study on reduction of U (Ⅵ) by an anaerobic bacterium, Shewanella putrefaciens: Application to sandstone-hosted interlayer oxidation-zone type uranium deposits, China

An experimental study on reduction of U (Ⅵ) by anaerobic bacteria, Shewane//a putrefaciens, is first reported here in China. The experimental conditions were: 35℃ and pH =7.0-7.4, corresponding to a physicochemical environments in which the sandstone-hosted interlayer oxidation-zone type uranium deposit formed in Northwest China's Xinjiang. Bacteria adopted in the present experiment, Shewanella putrefaciens, occur extensively in natural environment. Our study shows that nano-crystal precipitates of uraninite quickly occurred on the surface of the cells within one week. It was found that the pitchblende was characterized by a random arrangement of uraninite nanocrystals (2-4 nm) in it, significantly different from natural pitchblende in which uraninite nanocrystals are arranged in order. Finally, a possible mechanism of uranium biomineralization by microorganisms in the deposits is discussed. Our investigation may supply a technical train of thoughts for bioremediation of nuclear-contaminated water environments and for underground dissolving extraction of the sandstone-hosted uranium ores.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

锦屏大理岩动态劈裂拉伸破坏及能量演化特征分析

劈裂拉伸破坏是隧洞围岩失稳破坏的主要形式之一。现阶段,在动态劈裂条件下岩石裂纹扩展及对应阶段的能量演化机制鲜有涉及。基于此,采用分离式霍普金森压杆对锦屏大理岩试样进行了不同弹速下的劈裂试验,并借助ANSYS/LS-DYNA有限元软件,模拟试样动态劈裂破坏过程。从试验测试和数值计算角度,重点分析大理岩劈裂过程中的裂纹扩展机制以及能量演化特征。结果表明：在应变率为5～35 s−1时,大理岩的动态拉伸强度与应变率呈线性正相关,同其他地区大理岩相比较,锦屏大理岩的应变率敏感性相对较低;随着弹速的增加,系统内能和动能均增大,在试样破坏的瞬间系统内能降至最低;采用标定的Cowper-Symonds本构模型参数进行数值模拟,所得的试样最终破坏形态与试验观察到的现象基本一致。研究结果可为具体工程应用提供指导和参考。