土木工程结构的双层多重调谐质量阻尼器控制策略

为能得到用尽可能少的调谐质量阻尼器(TMD)组成有效性和鲁棒性高的多重调谐质量阻尼器控制系统，本文提出了一种适用于土木工程结构的新控制策略——双层多重调谐质量阻尼器(DMT—MD)。使用定义的优化目标函数，评价了双层多重调谐质量阻尼器(DMTMD)的控制性能。数值结果表明，双层多重调谐质量阻尼器(DMTMD)比多重凋谐质量阻尼器(MTMD)具有更好的有效性和对频率调谐的鲁棒性。DMTMD比双重调谐质量阻尼器(DTMD)具有更好的有效性，而DMTMD和DT—MD对频率调谐的鲁棒性近似相同。因此，双层多重调谐质量阻尼器是一种先进的结构控制策略。     

倾斜基岩上的土-框架相互作用研究

倾斜基岩上的框架是山地、丘陵地区多见的一种结构形式，但以往对其抗震性能研究很少。本文利用二次开发后的ANSYS对倾斜基岩上的框架的抗震性能进行了上下部相互作用分析。在研究中发现，考虑土一结相互作用后，结构的高阶振型在地震反应中的参与程度提高；可能在结构的地震反应傅里叶谱中形成双峰；并使地震反应沿结构高度的分布不再沿直线变化，而呈锯齿状分布。由于倾斜基岩将降低土层对地震波的放大作用，但基本不改变地基的卓越频率，因此倾斜基岩将会抑制上部结构的地震反应；而倾斜基岩上结构的地震反应分布将比相应平坦基岩上结构的地震反应分布更接近直线形分布，但变化形状基本相同。     

DLS型高精度多功能拾振器的设计与应用

文中介绍了新研制的便携式高精度多功能拾振器的技术性能、工作原理和理论计算,分析讨论了仪器的特点,给出了技术指标实测结果并进行了结构微振动记录幅值谱分析。     

A new method for testing pile by sin- gle-impact energy and P-S curve

Introduction Through many year's practices by vast numbers of scientific and technological workers andefforts from all aspects, the dynamic testing method of high-low strain has formally entered intothe technical code of foundation pile test of construction at last (The Industry Standards of thePeople's Republic of China, 2003). The striking mode of the dynamic testing method of high strainis stipulated as hammer in the code, the striking of rocket can also be used. The latter is widely…     

A simplified methd of evaluating the seismic performance of buildings

This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.     

A new method of testing pile using dynamic P-S-curve made by amplitude of wave train

A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibration graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is discussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve. Foundation item: Key projects of the tenth Five-year Plan of Yunnan Province (documented Yunnan district [2002]54-02-02) and Geophysical Society of Yunnan Province.     

Liquefaction mitigation in silty soils using composite stone columns and dynamic compaction

The objective of this study is to develop an analytical methodology to evaluate the effectiveness ofvibro stone column (S. C.) and dynamic compaction (D.C.) techniques supplemented with wick drains to densify and mitigate liquethctionin saturated sands and non-plastic silty soils. It includes the following: (i) develop numerical models to simulate and analyze soil densification during S.C. installation and D.C. process, and (ii) identify parameters controlling post-improvement soil density in both cases, and (iii) develop design guidelines for densification of silty soils using the above techniques. An analytical procedure was developed and used to simulate soil response during S.C. and D.C. installations, and the results were compared with available case history data. Important construction design parameters and soil properties that affect the effectiveness of these techniques, and construction design choices suitable for sands and non-plastic silty soils were identified. The methodology is expected to advance the use of S.C. and DC. in silty soils reducing the reliance on expensive field trials as a design tool. The ultimate outcome of this research will be design charts and design guidelines for using composite stone columns and composite dynamic compaction techniques in liquefaction mitigation of saturated silty soils.     

新疆及边邻地区7级以上地震前后北天山地下流体动态的异常变化

重点分析了新疆及边邻地区1980年以来6次7级以上地震前后北天山地下流体动态异常资料，其中3次地震前地下水有短期前兆异常变化，震时同震地震波效应普遍存在，震后异常十分突出且幅度大；以水位为主的水动力学效应反映了大区域应力调整过程具有不可逆特征。水文地球化学参数的变化不敏感。讨论了地下水远程效应与井震距离的关系以及阶跃异常的幅度等问题。     

考虑各向异性的层土-盾构隧道地震反应数值模拟

在层状各向异性土体-盾构隧道地震反应分析中,引入了横观各向同性弹塑性模型理论,建立了适合于横观各向同性介质的双渐近-多向透射边界条件。针对地铁区间盾构隧道抗震设计的特点,基于横观各向同性弹塑性模型,研制了考虑层状土体各向异性和施工开挖效应,适合于盾构隧道动力计算的各向异性弹塑性动力有限元程序。在程序中对于不同的材料采用了不同的本构关系和不同的单元形式,并采用了关联流动法则和多种屈服准则,可同时进行各向异性土体与地下结构的二维平面应力、平面应变和轴对称问题的静力和动力数值分析。最后利用所研制的程序进行了上海地铁二号线石门一路站附近区间隧道在不同超越概率地震动输入下的隧道反应计算。结果表明,在层状土体-地铁区间隧道的抗震分析中考虑土体各向异性的影响是必要的,所提出的计算模型是可行的。     

带TMD的结构基于动力可靠性约束的优化设计

本文在运用复模态法求得多自由度带TMD结构随机地震响应解析解的基础上．采用基于动力可靠性约束的优化设计方法对TMD装置参数的优化取值进行了系统研究,以结构最大位移响应的期望值为目标函数,以TMD装置响应的动力可靠性为约束条件,运用罚函数法获得到TMD装置的优化设计参数．并给出了算例,从而建立了带TMD结构基于动力可靠性约束的抗震优化设计的一整套方法,本文方法也可用于基础隔震结构、带TLD减震结构以及带TMD和TLD抗风结构的优化设计。