Oligocene–Miocene thrusting in central Aegean: insights from the Cycladic island of Amorgos

In the central Aegean, the Cycladic island of Amorgos consists of two high‐pressure (HP) units, the marble‐rich Amorgos unit, which is correlated to the Mesozoic ‘cover’ sequence of the Menderes Massif, and the Cycladic Blueschist unit. New structural data show that the deformation history of the Amorgos HP‐rocks was principally governed by early Oligocene (or late Eocene)–early Miocene ductile to brittle thrusting (D₁–D₃) followed by middle–late Miocene oblique contractional movements (D₄–D₅). The D₁ phase caused syn‐blueschist‐facies ductile thrusting of the Cycladic Blueschist unit over the Amorgos unit, with ambiguous kinematics. Progressive deformation under continuous NW–SE compression produced a sequence of imbricate NW‐directed thrusts (D_2/3) characterized by a stratification of fault‐related rocks, with mylonitic zones (D₂) giving way downwards to cataclastic zones (D₃). Ductile D₂ thrusting synchronous to greenschist‐facies retrogression, was accompanied by mega‐sheath folding during constrictional and general shear deformation. Brittle D₃ thrusting was associated with NW‐verging F₃ folds trending at a high‐angle to the transport direction. Orthogonal contraction gave way to transpression during which the compression orientation changed from NW–SE (D₄) to NE–SW (D₅). Back‐arc related NW–SE pure extension (D₆) seems to have been established in post‐late Miocene times and related high‐angle normal faulting affected HP‐rocks only after they had already reached the uppermost crustal levels. Oligocene–early Miocene deformation history is interpreted to indicate syn‐compressional exhumation of HP‐rocks possibly in an extrusion wedge. In this case, Amorgos HP‐rocks should have occupied the base of the extrusion wedge. Copyright © 2011 John Wiley & Sons, Ltd.     

华南板块南缘早中生代的逆冲推覆构造及其相关的动力学背景

作为理解华南构造演化的关键地区,在华南板块南缘的云开地体和越北的Song Chay地体发育了早中生代的向北东逆冲推覆的韧性变形.在云开地体,经历角闪岩相和绿片岩相变质的矿物指示了产状平缓的面理上发育明显的北东-南西向矿物拉伸线理.沿着这些矿物拉伸线理,具有上部指向北东的剪切变形.同位素年代学的定年结果指示了变形事件发生...     

Soft‐sediment deformation structures in a Pleistocene glaciolacustrine delta and their implications for the recognition of subenvironments in delta deposits

The development of soft‐sediment deformation structures in clastic sediments is now reasonably well‐understood but their development in various deltaic subenvironments is not. A sedimentological analysis of a Pleistocene (ca 13·1 to 15 ¹⁰Be ka) Gilbert‐type glaciolacustine delta with gravity‐induced slides and slumps in the Mosty‐Danowo tunnel valley (north‐western Poland) provides more insight, because the various soft‐sediment deformation structures in these deposits were considered in the context of their specific deltaic subenvironment. The sediments show three main groups of soft‐sediment deformation structures in layers between undeformed sediments. The first group consists of deformed cross‐bedding (inclined, overturned, recumbent, complex and sheath folds), large‐scale folds (recumbent and sheath folds) and pillows forming plastic deformations. The second group comprises pillar structures (isolated and stress), clastic dykes with sand volcanoes and clastic megadykes as examples of water‐escape structures. The third group consists of faults (normal and reverse) and extensional fissures (small fissures and neptunian dykes). Some of the deformations developed shortly after deposition of the deformed sediment, other structures developed later. This development must be ascribed to hydroplastic movement in a quasi‐solid state, and due to fluidization and liquefaction of the rapidly deposited, water‐saturated deltaic sediments. The various types of deformations were triggered by: (i) a high sedimentation rate; (ii) erosion (by wave action or meltwater currents); and (iii) ice‐sheet loading and seasonal changes in the ablation rate. Analysis of these triggers, in combination with the deformational mechanisms, have resulted – on the basis of the spatial distribution of the various types of soft‐sediment deformation structures in the delta under study – in a model for the development of soft‐sediment deformation structures in the topsets, foresets and bottomsets of deltas. This analysis not only increases the understanding of the deformation processes in both modern and ancient deltaic settings but also helps to distinguish between the various subenvironments in ancient deltaic deposits.     

Study on forward modeling of through-casing resistivity logging

Through-casing resistivity logging (TCRL) is a new kind of logging method for formation evaluation,reservoir monitoring and saturation changes tracking. In this paper,the basic principle of TCRL is de-tailed,and the modified transmission line equation method (MTLEM) is first proposed in China. The MTLEM has been employed to simulate the responses of TCRL,on the basis of which,the effects of formation resistivity,cement and casing on the responses of TCRL are analyzed,and the signals in-duced in different formations are also calculated,which can help the design of TCRL tool and data processing and interpretation in China.     

河北平原沉积物中记录的新仙女木事件

河北平原的高阳、羊二庄、南庄头孢粉剖面和阳原、怀涿盆地的冻融褶皱清楚地记录了冰期向全新世过渡中的新仙女木气候逆转事件.河北平原的新仙女木降温事件以冷干为特征,降温幅度约8℃.     

权家河煤矿褶皱构造发育特征

系统分析了权家河煤矿不同规模褶皱构造的形态特征、组合方式和展布规律,探讨了造就褶皱构造发育特征的地质条件及其演化过程。从而为指导权家河煤矿生产和揭开渭北煤田地质构造发育规律的面纱提供了依据。      

博格达山地区二叠纪以来构造应力场解析及地质意义

博格达山是现代地质学研究的一个热点,但是大部分研究都集中在博格达何时隆升,对于其构造应力场的研究较少。作者通过对博格达山地区不同时代地层中岩墙、节理、褶皱和断层等构造进行分期配套以及构造要素测量分析,认为二叠纪以来博格达山及周缘地区具有较强构造变形,构造应力场可划分为3期:二叠纪末期最大主压应力方向为北西西向,可能与后碰撞伸展作用和乌拉尔碰撞带向东挤压的远程效应有关;侏罗纪末-早白垩世最大主压应力为近南北向,与欧亚板块和拉萨地块的碰撞有关;新近纪以来由于印度板块与欧亚板块相互碰撞的远程效应,博格达山地区最大主应力方向为NNE-NE向。这些结果表明,博格达山具有多期次的构造运动,主要受欧亚板块南缘不同时期小陆块碰撞的控制,并且这些构造应力场对周缘盆地油气成藏具有一定影响。     

前陆冲断带复杂构造解析与建模——以准噶尔盆地南缘第一排背斜带为例

构造解析应从构造的变形机制、变形过程、变形量和变形时间四个方面入手,合理的构造解释方案是构造解析的基础,论文将等倾角区划分和轴面分析等几何学方法应用到地震解释中,从以上4个方面对准噶尔盆地南缘第一排背斜带做了系统的构造解析。地层结构揭示第一排背斜带深部发育楔状构造,楔状构造由5个古生界—中生界组成的断层转折褶皱叠加而成,是潜在的勘探目标群。在构造楔沿侏罗系西山窑组煤层向北扩展过程中,台阶状逆断层的大部分位移量沿构造楔顶部的反冲断层向南消减,另一部分位移量则沿西山窑组煤层向北传递至第二排背斜带,在总位移量保持稳定的前提下,第一排背斜带和第二排背斜带在走向上的此消彼长,反映位移量在南、北两个方向上的转换。     

韧性剪切带相关褶皱研究进展

褶皱是韧性剪切带内普遍发育的构造变形,是研究韧性剪切带乃至造山带构造作用的桥梁,但是对于剪切带中存在的这类褶皱国内尚无统一命名,本文根据剪切带内褶皱的最新研究成果,引进了“韧性剪切带相关褶皱”的概念。目前,国内外学者对韧性剪切带相关褶皱(尤其是鞘褶皱)的研究多集中在运动学和动力学上。本文介绍了韧性剪切带相关褶皱的类型及其研究方法,为客观理解韧性剪切带相关褶皱的形成机制提供了新思路和方法,进而为恢复陆内造山作用过程提供了客观的约束条件。     

湖南炎陵印支期隔槽式褶皱形成机制

为查明湘东南印支期褶皱特征及形成机制,对炎陵地区进行了详细的地质填图和野外观察。调查表明,泥盆纪跳马涧组与前泥盆纪褶皱基底间不整合界面在空间上组成背、向斜,表明褶皱基底参与了印支期褶皱作用。平面上,向斜出露宽度及延伸规模明显较背斜小,向斜转折端表现清楚且狭窄尖长,而背斜转折端没有清楚显示;剖面上,不整合界面靠近向斜核部产状陡,向两翼方向迅速变缓。反映出背斜平缓开阔、向斜紧闭狭窄且侧翼呈上拱尖棱状的隔槽式褶皱特征。印支期褶皱呈北北东向,横跨在前泥盆纪褶皱基底中加里东期北西向褶皱之上,但未对加里东期褶皱造成明显地叠加改造效应,说明前泥盆纪地层在印支运动中没有发生明显地弯滑褶皱作用。露头显示,褶皱过程中盖层未沿不整合界面产生明显滑脱。因此,认为炎陵地区隔槽式褶皱形成于基底(厚皮式)横向收缩与压扁作用,并从理论上论证了其隔槽式褶皱不可能是盖层沿基底滑脱的产物,纠正了前人的薄皮式观点。