Regional flow perturbation folding within an exhumation channel: A case study from the Cycladic Blueschists

Kilometre-scale cylindrical folds and associated parasitic folds that trend at small angles to the transport lineation are analysed along a 100-km-long transport-normal segment of the Cycladic Blueschists in an attempt to reconstruct the 3D structural architecture within an exhumation channel. Reversals in the polarity of both fold vergence and the hinge/lineation obliquity occur in a flow-normal direction, defining transport-parallel culmination and depression surfaces that root downwards onto an underlying detachment. Fold patterns generated around culmination and depression surfaces support models of flow-perturbation folding where folds initiate at small angles or sub-parallel to transport in response to wrench-dominated differential shearing. Successive culmination and depression surfaces are separated from one another by along strike distances of ∼20 km, although atypical fold geometries developed in the flanks of major culmination and depressions follow their own patterns, revealing that smaller perturbations occur within the larger scheme. Major culminations are interpreted to reflect regions of surging flow marked by increased velocity during exhumation, whilst the opposite is true for depressions. This behaviour implies that on a regional scale, differential shear varies laterally in an irregular-sinusoidal manner defining areas of relative high and relative low displacement within the exhumation channel.     

Temporal and spatial changes of the submarine Cretaceous paleoslope in Northern Tunisia,inferred from slump folds analysis

This paper presents the first comprehensive, non-exhaustive, study of the genetic relationship between slump folds and the synsedimentary paleoslope during Cretaceous time in northern Tunisia. Slump folds occur mainly in the Cretaceous marl-dominated lithofacies, which exposes numerous slump folds structures. In addition, fault kinematic analysis is conducted to define the paleostress fields and the stress states characterizing the Cretaceous extension that triggers soft-sediment deformation and slumping. The MAM and the APM methods are used to deduce the paleoslope in several localities. The calculated values of paleoslope trend derived from MAM and APM methods precise the variation of the paleoslope trend during Cretaceous times in northern Tunisia. This paleoslope is ～NW-dipping during Berriasian, ～SSW-dipping during Valanginian, ～NW-dipping during the Barremian and ～N- to ～NNE or ～S- to ～SSW-dipping during Aptian–Albian period. The results of the back-tilted fault diagram show a ～North to ～Northeast-trending tectonics extension. The back-tilting of Cenomanian slump axis and poles of axial planes (MAM and APM methods) give close results with ～Southward or ～Northward-dipping paleoslope. The restored fault diagrams show ～North to ～Northeast-trending extension during Cenomanian times. Coniacian-Santonian marls deposits seal all the gravity-driven deformation structures. North Tunisian area exposes evidences for abundant soft-sediment deformation and slumping atop a northward facing submarine slope, which was probably dominant from the Early Cretaceous to Santonian with ～North-South tectonic extension related to the Southern Tethyan rifted continental margin evolution.     

Structural evolution of the Tuscan Nappe in the southeastern sector of the Apuan Alps metamorphic dome (Northern Apennines,Italy)

Structural analysis carried out in the Tuscan Nappe (TN) in the southeastern sector of the Apuan Alps highlights a structural evolution much more complex than that proposed so far. The TN has been deformed by structures developed during four deformation phases. The three early phases resulted from a compressive tectonic regime linked to the construction of the Apenninic fold‐and‐thrust‐belt. The fourth phase, instead, is connected with the extensional tectonics, probably related to the collapse of the belt and/or to the opening of the Tyrrhenian Sea. Our structural and field data suggest the following. (1) The first phase is linked to the main crustal shortening and deformation of the Tuscan Nappe in the internal sectors of the belt. (2) The second deformation phase is responsible for the prominent NW–SE‐trending folds recognized in the study area (Mt. Pescaglino and Pescaglia antiforms and Mt. Piglione and Mt. Prana synforms). (3) The direction of shortening related to the third phase is parallel to the main structural trend of the belt. (4) The interference between the third folding phase and the earlier two tectonic phases could be related to the development of the metamorphic domes. The two directions of horizontal shortening induced buckling and vertical growth of the metamorphic domes, enhancing the process of exhumation of the metamorphic rocks. (5) The exhumation of the Tuscan Nappe occurred mostly in a compressive tectonic setting. A new model for the exhumation of the metamorphic dome of the Apuan Alps is proposed. Its tectonic evolution does not fit with the previously suggested core complex model, but is due to compressive tectonics. Copyright © 2004 John Wiley & Sons, Ltd.     

鞘褶皱式结构和运动方式的普遍性与生命动力学

鞘褶皱式的结构样式和运动方式并非韧性剪切带所独有,在自然界和生物界中也广泛存在,是世间万物表现形式和运动的普遍方式,是无机界与有机界、植物与动物连接的纽带与桥梁。鞘褶皱式结构和运动方式的不断变异,是生命发展与演化的主导因素,是生命科学中继DNA双螺旋结构之后的又一新发现。     

The Fault Block's Framework in Boli Basin and its Control Over the Deposition

IntroductionBoli basin, in the east of Heilongjiang Province,is an arc basin protruding southwards which ispressed by two region81 lithospheric fau1t zones:Yishu fault zone and Dunmi fault zone (Wan Tian-feng, l996). The basin is about 240km long and60km …     

Statistical classification of macroscopic folds as cylindrical, circular conical, or elliptical conical

A folded surface can be represented by the orientation of normals to the surface measured at several locations. When plotted on the unit sphere, the pattern of normals determines the type of fold. Poles from a cylindrical fold give a great circle on the unit sphere, whereas poles of a circular conical fold give a small circle, and poles from an elliptical conical fold give the projection of an ellipse onto the surface of the sphere. Several statistical tests that appear in the literature for classifying folds are discussed and compared. All but one of the tests use quantities obtained from an iterative least-squares procedure that fits the appropriate curve on the sphere. The classification procedure is illustrated with folds from the Canadian Rocky Mountains and uses for examples a cylindrical fold and a circular conical fold from the Smoky River coal field near Grande Cache, Alberta, and an elliptical conical fold near Jasper, Alberta. This methodology has resulted in new coal reserves in the Grande Cache area.This paper was presented at Emerging Concepts, MGUS-87 Conference, Redwood City, California, 13–15 April 1987.     

Superposed folding in the Rockley district,Lachlan Fold Belt,New South Wales

Low grade metasediments and metavolcanics of the Hill End Synclinorial Zone within the Rockley district, NSW have experienced two phases of macroscopic folding (D1 and D2), both of which are post‐latest Silurian in age. No hiatus is evident between D1 and D2. D1 produced large Fi folds (λ/2 usually > 2 km) lacking mesoscopic elements and having variable axial trends. D2 was associated with the development of regional slaty cleavage (S2) and mesoscopic folds which are parasitic on plunging macroscopic F2 folds (λ/2=0.4–2 km). D2 strain is variable, being most intense in the north of the district where slaty cleavage and tight mesoscopic F2 folds are well developed, and weakest in the south where mesoscopic folds are absent or usually gentle and cleavage is often feebly developed even in mica‐rich rocks, which are stratigraphic equivalents to slates and schists in the north. The F1 fold mechanism may involve multiple folding, simultaneous folding in more than one direction, or complex buckling of layers of variable thickness. D1 and D2 are tentatively correlated with folding events elsewhere in the Hill End Synclinorial Zone.     

断层相关褶皱解释之平衡剖面技术

从实际问题出发,扼要阐述了平衡剖面技术的基本概念,并结合实例着重探讨了其应用研究.在介绍了与平衡剖面有关的基本概念的基础上,总结平衡剖面技术的研究流程和平衡剖面结果的评价标准,结合缅甸区块实际资料深入探讨其在断层相关褶皱构造模式建立和检验调整地震解释以及在恢复挤压构造发育史方面的应用情况,显示了其在缅甸区块叠瓦状断层转折褶皱的良好应用效果,并获得剖面的水平延展量,同时也认识到许多潜在的客观问题,有待进一步探索.     

The structural evolution of sheath folds: A case study from Cap de Creus

It has long been recognised that within zones of intense non-coaxial deformation, fold hinges may rotate progressively towards the transport direction ultimately resulting in highly curvilinear sheath folds. However, there is a surprising lack of detailed and systematic field analysis of such “evolving” sheath folds. This case study therefore focuses on the sequential development of cm-scale curvilinear folds in the greenschist-facies El Llimac shear zone, Cap de Creus, Spain. This simple shear-dominated dextral shear zone displays superb three dimensional exposures of sheath folds defined by mylonitic quartz bands within phyllonite. Increasing amounts of fold hinge curvature (δ) are marked by hinge segments rotating into sub-parallelism with the mineral lineation (Lm), whilst the acute angle between the axial-planar hinge girdle and foliation (ω) also displays a sequential reduction. Although Lm bisects the noses of sheath folds, it is also clearly folded and wrapped-around the sheath hinges. Lm typically preserves a larger angle (θ) with the fold hinge on the lower limb (L) compared to the upper (U) limb (θL > θU), suggesting that Lm failed to achieve a steady orientation on the lower limb. Adjacent sheath fold hinges forming fold pairs may display the same sense of hinge arcing to define synthetic curvature, or alternatively opposing directions of antithetic curvature. Such patterns reflect original buckle fold geometries coupled with the direction of shearing. The ratio of long/short fold limbs decreases with increasing hinge curvilinearity, indicating sheath folds developed via stretching of the short limb, rather than migrating or rolling hinge models. This study unequivocally demonstrates that both hinges of fold pairs become curvilinear with sheaths closing in the transport direction recording greater hinge-line curvilinearity compared to adjacent return hinges. This may provide a useful guide to bulk shear sense.     

变质岩区褶皱构造恢复的方法与实践--以新疆北山高尖地区为例

强烈变形变质地区，构造置换往往导致层理或褶皱变形面消失，从而造成大褶皱形态确定的困难性，采用微片石法、无根褶皱法，构造透镜体法，脉体褶皱法等新方法恢复大褶皱，可以取得良好效果，新疆北山高尖地区石炭系石板山组由于强烈变形变质，区域褶皱不显，为常规方法难以识别的隐性褶皱，曾认为是单斜地层，在区调填图基础上，综合运用上述方法，相互印证，成功恢复了该区一系列近东西向，长达数十千米的紧闭等斜褶皱。