Anatomy of a subduction complex: architecture of the Franciscan Complex,California, at multiple length and time scales

The Franciscan Complex of California records over 150 million years of continuous E-dipping subduction that terminated with conversion to a dextral transform plate boundary. The Franciscan comprises mélange and coherent units forming a stack of thrust nappes, with significant along-strike variability, and downward-decreasing metamorphic grade and accretion ages. The Franciscan records progressive subduction, accretion, metamorphism, and exhumation, spanning the extended period of subduction, rather than events superimposed on pre-existing stratigraphy. High-pressure (HP) metamorphic rocks lack a thermal overprint, indicating continuity of subduction from subduction initiation at ca. 165 Ma to termination at ca. 25 Ma. Accretionary periods may have alternated with episodes of subduction erosion that removed some previously accreted material, but the complex collectively reflects a net addition of material to the upper plate. Mélanges (serpentinite and siliciclastic matrix) with exotic blocks have sedimentary origins as submarine mass transport deposits, whereas mélanges formed by tectonism comprise disrupted ocean plate stratigraphy and lack exotic blocks. The former are interbedded with and grade into coherent siliciclastic units. Palaeomegathrust horizons, separating nappes accreted at different times, appear restricted to narrow zones of <100 m thickness. Exhumation of Franciscan units, both coherent and mélange, was accommodated by significant extension of the hanging wall and cross-sectional extrusion. The amount of total exhumation, as well as exhumation since subduction termination, needs to be considered when comparing Franciscan architecture to modern and ancient subduction complexes. Equal dextral separation of folded Franciscan nappes and late Cenozoic (post-subduction) units across strands of the (post-subduction) San Andreas fault system shows that the folding of nappes took place prior to subduction termination. Dextral separation of similar clastic sedimentary suites in the Franciscan and the coeval Great Valley Group forearc basin is approximately that of the San Andreas fault system, precluding major syn-subduction strike-slip displacement within the Franciscan.     

采动煤岩渗透率演化模型及数值模拟

为描述采动煤岩渗透率演化过程,引入强度退化指数,基于Hoek-Brown强度准则,建立了考虑围压影响的煤岩应变软化力学本构模型。给出了体积应变和渗透率的关系方程,结合应变软化模型建立了采动煤岩渗透率演化模型,并在FLAC下予以实现。通过数值模拟研究了不同围压下圆柱岩样的峰后应变软化力学行为和某煤矿工作面开采过程中煤岩的渗透率演化过程,结果表明：（1）该模型能较好地反映围压对煤岩峰后应变软化行为的影响;（2）随着工作面推进,越来越多的煤岩单元破坏,渗透率也不断增长,逐渐成为瓦斯等流体运移的主要通道。（3）模型能再现采动煤岩渗透率演化的动态过程,从而为煤与瓦斯共采、煤层瓦斯抽放和瓦斯灾害防治提供指导。     

北部湾地区海砂填料的动力特性分析

为研究北部湾地区海砂填料的动力特性,采用高级动态三轴测试系统开展循环荷载下的动三轴试验,研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小,围压150 kPa时振次10 000后应变仅为3%;随着动应力幅值的增大轴向累积应变随之增大,且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大,不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势,ε_d>0.3%后开始趋于稳定;不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势,其中动应力幅值对动弹性模量有明显的影响,围压影响相对较小。孔压比随动应力幅值增加而减小,随围压增加而增加。     

Effect of Cyclic Loading Frequency on Undrained Behaviors of Undisturbed Marine Clay

Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for beth the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are beth the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.     

Seismic tests on reinforced concrete and steel frames retrofitted with dissipative braces

Seismic tests have been conducted on two 3‐storey structures protected with pressurized fluid‐viscous spring damper devices. One of the structures was a reinforced concrete frame with clay elements in the slabs, while the other one was a steel frame with steel/concrete composite slabs. The spring dampers were installed through K bracing in between the floors. The tests were performed by means of the pseudodynamic method, which allowed the use of large and full‐size specimens, and by implementing a specific compensation strategy for the strain‐rate effect at the devices. The test results allowed the verification of the adequacy of the attachment system as well as the comparison of the behaviour of the unprotected buildings with several protected configurations, showing the benefits of the application of the devices and the characteristics of their performance. The response of the protected structures was always safer than that of the unprotected ones mainly due to a significant increase of equivalent damping. The increase in the damping ratio depends on the level of deformation. Copyright © 2004 John Wiley & Sons, Ltd.     

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.     

干湿循环与初始静偏应力耦合作用下城市污泥固化土动力累积变形特性

城市污泥固化土用作路基填料,对于节约工程成本、保护环境等具有重要意义。本文以城市污泥固化土为研究对象,利用DDS动三轴仪,从干湿循环次数、初始静偏应力、动应力3个方面研究其对累积塑性应变及动强度特性的影响。试验结果表明:在干湿循环单独作用下,土体累积塑性应变随干湿循环次数的增加先增大后趋于稳定,但与初始静偏应力耦合作用下对土体累积塑性应变的影响不太显著。动应力对其影响较大,且存在临界值:当动应力小于临界值时,累积塑性应变呈现出先增大后逐渐稳定的趋势; 当动应力大于临界值时,累积塑性应变在达到某一振次后快速增大,土体迅速产生变形破坏。干湿循环与初始静偏应力都会降低土体的动强度,但干湿循环在达到10次后,动强度将趋于平稳,不再受其影响。通过回归分析,建立了考虑干湿循环次数、初始静偏应力及动应力等因素影响的城市污泥固化土稳定型累积塑性应变模型,并验证了其可行性。     

基于数字图像分析的土工合成材料加筋砂土拉拔试验研究

由于加筋土界面作用的复杂性,加筋土工程建设中铺设土工格栅时往往采用经验的方法,很大程度上造成了土工格栅的浪费及工程安全隐患,理清不同填料筋土界面作用的影响范围,有助于确定加筋土结构的合理加筋间距。为了揭示不同填料筋土界面作用的影响范围,采用4种不同类型的砂土与格栅在不同法向应力下进行了一系列的拉拔试验,并结合数字图像量测技术,分析了不同类型砂土下界面剪切带厚度、颗粒位移矢量、格栅拉拔阻力峰值及应变等演变规律。研究表明：界面剪切带厚度H随法向应力σ_v与砂土平均粒径d₅₀的增加而增大,通过多变量拟合的方法,得到了H、σ_v与d₅₀三者之间的函数表达式;格栅在拉拔过程中,砂土颗粒位移矢量以土工格栅为界有着显著的差别,格栅上部的颗粒位移矢量明显大于下部颗粒,且在格栅上下一定范围内会形成颗粒位移矢量集中带;拉拔阻力峰值随σ_v及d₅₀的增加而增大;不同类型砂土各区段的格栅应变均表现出由前向后依次递减的趋势。     

基于广义SMP破坏准则的柱形孔扩张问题理论分析

采用应力跌落的简化应力-应变模型考虑土的应变软化特性,同时采用简化的体积应变?v与大主应变?1及大主应变?1与小主应变?3之间的相互关系反映土的剪胀特性,根据空间准滑动面(SMP)理论和平面应变轴对称问题的柱形孔扩张基本方程,推导并给出一般黏性土中柱形孔扩张问题的应力场、应变场、位移场、塑性区半径和孔扩张压力。通过算例分析,探讨了土的剪胀因素、软化特性对孔扩张问题的影响程度。为了反映中主应力的影响,将本文解与基于Mohr-Coulomb破坏准则的解答进行了比较。计算结果表明,土的剪胀性和软化特性及中主应力对孔扩张问题的影响是显著的,基于Mohr－Coulomb破坏准则的孔扩张解答往往偏于保守。     

网络环境下地质资料管理工作初探

本文基于当前形势下地质科学重点的转移以及计算机信息技术迅速发展为地质资料馆带来的影响,作者论述了地质资料管理工作的发展趋势,并指出提高管理人员的素质是做好地质资料管理工作的关键.