The seismic shear of ductile cantilever wall systems in multistorey structures

The distribution of seismic base shear demand among ductile flexural cantilever walls, comprising the lateral load resisting system of a multistorey building, is studied. It is shown that the base shear force demand depends on the sequence of hinge formation at the wall bases, and this in turn depends on the relative wall lengths. Hence, the routine elastic approach in which the shear forces are allocated per relative flexural rigidity or (when some consideration is given to plastic hinge formation) to moment capacity at the wall base, may appreciably underestimate the shear force demand on the walls, particularly the shorter (usually the more flexible) ones. A simple procedure yielding the results of ‘cyclic’ pushover analysis is proposed to predict the peak seismic wall forces for a given total base shear when plastification is confined to the wall base. The effects of plastic hinges developing at higher floors on (1) shear distribution among the walls and (2) the in‐plane floor forces are also considered. Two numerical examples are presented to demonstrate the main points made. Copyright © 2004 John Wiley & Sons, Ltd.     

Seismic performance evaluation of steel arch bridges against major earthquakes. Part 1: dynamic analysis approach

In this study the inelastic behavior of steel arch bridges subjected to strong ground motions from major earthquakes is investigated by dynamic analyses of a typical steel arch bridge using a three‐dimensional (3D) analytical model, since checking seismic performance against severe earthquakes is not usually performed when designing such kinds of bridge. The bridge considered is an upper‐deck steel arch bridge having a reinforced concrete (RC) deck, steel I‐section girders and steel arch ribs. The input ground motions are accelerograms which are modified ground motions based on the records from the 1995 Hyogoken‐Nanbu earthquake. Both the longitudinal and transverse dynamic characteristics of the bridge are studied by investigation of time‐history responses of the main parameters. It is found that seismic responses are small when subjected to the longitudinal excitation, but significantly large under the transverse ground motion due to plasticization formed in some segments such as arch rib ends and side pier bases where axial force levels are very high. Finally, a seismic performance evaluation method based on the response strain index is proposed for such steel bridge structures. Copyright © 2004 John Wiley & Sons, Ltd.     

~(40)Ar/~(39)Ar dating of shear deformation of the Xianshuihe fault zone in west Sichuan and its tectonic significance

TheNW-SEstrikingXianshuihefaultzoneslicesthesoutheasternTibetanPlateauandconnectssoutheastwardwiththeAnninghe-Zemuhe-Xiaojiangfaultzone,whichformahuge,activesinistralstrike-slipfaultzone(fig.1).ThisfaultzoneisanimportantseismicfaultineastTibet[1-5].EarthquakegeologystudiesandoffsetpatternsofyounggeologicalfeatureshaveshownthatlateQuaternarysinistralsliprateoftheXianshuihefaultzonereaches13mm/a[1,2].TheXianshuhefaultzoneconsistsoftwomainbranches,theDaofufaultbranchinthewestandtheXianshuih…     

晴空日中尺度切变环境场与对流云团发展条件

重点应用雷达回波资料结合常规气象资料、卫星云图 ,综合分析了 50 0hPa中尺度切变与陕北南部地区对流阵性降水形成、发展条件 ,指出了 50 0hPa不同的中尺度切变与有利的环境合理配置 ,是导致对流云团发展的重要因素 ,不同特征环境风切变配置与对流单体的发展趋势、强度变化、移动和合并息息相关。     

陕西略阳铧厂沟金矿床地质与矿床类型

铧厂沟金矿床位于勉略缝合带中泥盆系三河口群郭镇岩组中。含矿与容矿岩系为泥盆系三河口群郭镇岩组中的细碧岩和结晶灰岩。主控矿构造为寨子湾韧-脆性剪切构造带。围岩蚀变包括退化蚀变和矿化蚀变。在矿区内产出南北两条矿化带，矿石类型为蚀变细碧岩型、黄铁绢英片岩型和石英脉型。主要的金属矿物为黄铁矿和黄铜矿，金矿物是自然金。韧脆性剪切构造叠加和岩石强烈变形、彻底退化蚀变以及后期含矿热液交代与充填是主要的成矿作用，属于火山-沉积岩系中的类卡林型金矿床。     

南秦岭夏家店卡林型金矿床构造特征与成矿关系

从地质背景、矿床地质、控矿构造分析了夏家店金矿床特征及其形成过程及成矿机理；矿床产于南秦岭陡岭古隆起边缘寒武系-震旦系碳-泥-硅质板岩及白云岩中；控矿构造具有二次韧性剪切变形、二次构造角砾岩化及二次脉体矿化的特征，显示出式样多种、性质多样、形式多变、活动期次与阶段多次叠加的特点；具体阐述了各构造作用阶段与矿化蚀变之间的关系，建立了地层建造-剪切与张裂构造-热液渗流的成矿系统。属于沉积岩系、构造、热液活动3种地质作用叠加改造的卡林型金矿床。     

辽西医巫闾山地区中生代两期韧性变形的研究

医巫闾山地区的韧性剪切构造是中生代两期韧性变形作用的产物。早期韧性变形中a线理发育,线理走向和糜棱面理走向基本一致,线理在xy面上的侧伏角绝大多数<30°;该期韧性变形是以左行走滑运动为主。晚期韧性变形中a线理发育,线理倾伏向和糜棱岩中糜棱面理倾向相近,线理在xy面上侧伏角主要在45°～90°之间;该期韧性变形是伸展作用的产物。医巫闾山中生代两期韧性剪切变形作用表明,在侏罗纪至早白垩世期间辽西地区不仅发生了强烈挤压推覆作用和伸展作用,也发生了大规模左行走滑作用。该韧性变形作用的发现对进一步研究辽西中生代的构造演化序列、期次和构造格架转换等问题有重要意义。     

地铁隧道开挖引起地表塌陷分析

深圳富水软弱地层地铁隧道开挖中出现的工作面失稳及由此引起的地表塌陷是地铁安全施工中极其重要的方面，对施工安全、进度都有较大影响，同时也对整个工程造成巨大的经济损失。通过对深圳地铁Ⅰ期工程土建施工中全线部分暗挖标段出现的工作面失稳、地表塌陷工程实践和现场监测结果分析，特别着重对连续2次出现地表塌陷的3A标暗挖隧道研究，从隧道上覆地层物理力学性质参数、地层变形监测分析及施工工艺原因3方面阐述了地表塌陷的原因。明确提出剪切破坏线和失水空洞区的概念，确定出引发地表塌陷的主导因素为施工工艺原因。建议针对该类地层条件，应做好超前地质预报．适当调整预加固参数．加强隧道结构和地表的动态变形监测，施工技术人员做到准确了解施工现场动态，及时调整施工工艺参数，以保证隧道的安全施工。分析结果对深圳地铁Ⅱ期工程施工及类似地层条件地下工程施工提供科学预测、预防地表塌陷的方法和技术措施，达到地铁隧道施工中经济效益与安全施工的统一。     

基于梯度塑性理论的岩样在压剪条件下变形及稳定性分析

考虑了正应力及剪应力联合作用在岩样的端部,而且,在正应力被视为变量,剪应力被视为常量这一特殊条件下,对剪切带的变形特征及剪切带-带外弹性体系统的失稳判据进行了分析.根据剪切虎克定律及梯度塑性理论,提出了剪切带内部弹性应变、塑性应变及总应变的解析式,对上述三种应变进行积分,提出了剪切带错动弹性位移、塑性位移及总位移的解析式.利用压缩虎克定律及几何关系建立了剪切带外弹性体的刚度的表达式.根据刚度理论,建立了剪切带-带外弹性体系统的失稳判据.考虑岩样端面的剪切应力后,在流动剪切应力相同时,剪切带内部的弹性剪切应变(均匀分布)将增加;剪切带内部的塑性剪切应变(不均匀分布)将减小;剪切带的弹性剪切位移(线性分布)将增加;剪切带的塑性剪切位移(非线性分布)将减小;剪切带错动位移要小一些.另外,剪切应力对剪切带-带外弹性体系统的失稳判据没有影响.失稳判据仅和岩石的本构参数、剪切带倾角及结构尺寸有关.     

双剪统一强度准则改进及其在岩土工程中的应用

在分析Mohr-Coulomb强度准则和双剪统一强度准则的基础上,提出了主剪面应力对和主剪面应力对的作用这2个新概念,并以此为出发点,通过考虑十二面体单元主剪面上所有3个主剪面应力对的共同作用,在双剪强度准则的基础上提出了一个新准则,并对其作了极限线分析.应用该新强度准则研究了静水压力条件下圆形巷道围岩弹塑性分析和土压力计算问题.研究表明,该准则不仅能较好地非线性反映岩土的3个基本强度特征,还解决了双剪统一准则中存在的双重破坏角问题.