江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。     

Weibull statistical analysis of granite bending strength

Summary  This paper describes and discusses the adequacy of Weibull statistical analysis to analyse the bending strength of granite. The experimental results show that strength variability is related with a specific origin of failure. This conclusion is based on analysing the influence of the surface condition (extrinsic defects) on the bending strength results treated by the Weibull statistics. The conclusions drawn from this study have been validated by analysing the results of the critical flaw dimension estimated by applying the linear elastic fracture mechanics (LEFM) formulae. Results obtained from fractographic examination also have been used to describe the location of the origin of the fracture and understand the distribution of defects; i.e., there is a unimodal distribution of defects (intrinsic defects), despite the fact that some outlier values are normally observed in the fractured surfaces. Correspndence: P. M. Amaral, Department of Materials Engineering, Instituto Superior Técnico, Technical University of Lisbon, Av. Rovisco Pais, 1049-001 Lisboa, Portugal     

引水工程秦巴段隧洞地应力模拟及工程地质问题

利用Ansys有限元软件对三峡引水工程秦巴段线路不同深度、不同截面形态隧洞围岩的应力重分布情况进行模拟计算,得到圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力数值和等值线图.利用库仑一纳维尔强度准则,对花岗岩区及灰岩区隧洞围岩的剪切破坏进行分析;利用三种岩爆应力判别指标,对岩爆进行初步预测;进而对不同深度、不同截面形态的隧洞围岩的稳定性进行分析;最后对引水工程隧洞设计中截面形态的选择给出了初步建议.     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.     

饱和软黏土动力学特性循环扭剪试验研究

以饱和软黏土的循环扭剪试验研究为基础,阐明不固结不排水条件下饱和软黏土的动力学特性。在循环扭剪和循环三轴两种不同试验应力状态下,通过研究不同围压和不同静、动应力组合下饱和软黏土的应力等效破坏关系和应变等效破坏关系,提出在循环荷载作用下饱和软黏土的循环破坏同样遵循Mises屈服准则,且在Mises屈服准则下,饱和软黏土的循环强度趋于不变量。循环破坏的过程可以等效为一种拟静力弹塑性循环蠕变,建立了饱和软黏土循环累积变形随静荷载、循环荷载以及循环破坏振次之间的关系式。上述结论分别从应力和变形两个方面阐述饱和软黏土的动力学特性,与试验应力状态和围压无关,可以推广到一般应力状态下。     

渤海中南部悬浮物海洋调查资料分析

对于悬浮物 (SPM)的研究目前已引起诸多学者关注。作者利用 1998和 1999年的中德合作海洋调查所获得的资料进行分析。主要进行三个方面的工作 :研究悬浮物与透明度的关系 ;研究悬浮物与浊度的关系 ;估计海底剪切速度。并为研究悬浮物输运提供资料和作前期研究     

软粘土中插入式大直径薄壁圆筒结构的一种极限状态分析模型

根据插入式大直径薄壁圆筒结构的工作特点建立了其合理的破坏机制，以此为基础建立了受横向荷载作用的插入式大直径薄壁圆筒结构的上限法极限分析模型，从中可以得到作用于插入式大直径薄壁圆筒结构上的横向极限荷载近似的上限解；并根据上限法模型计算结果，提出了计算受横向荷载作用的插入式大圆筒结构侧壁极限抗力的简化修正模型，利用此修正模型，基于极限平衡法，可以求解作用于插入式大直径薄壁圆筒结构上的横向极限荷载。