黑龙江嫩江三矿沟—多宝山—争光成矿带地质特征与成矿规律

三矿沟—多宝山—争光成矿带为东北地区重要的金属矿集区,发育有三矿沟矽卡岩铜铁矿床、多宝山斑岩铜钼矿床、争光浅成低温金矿床等典型矿床。基于已获得的研究成果,结合前人的资料,重点解剖多宝山、三矿沟和争光3个典型矿床的地质特征,发现3个矿床的成矿类型和地质特征大不相同,成矿时代(加里东期、燕山早期和燕山中期)各异。综合地质研究表明,多宝山矿床形成于岩浆弧背景,三矿沟矿床为弧后伸展背景的产物,争光矿床形成于碰撞后陆壳伸展背景。     

Identification of the anomaly component using BEMD combined with PCA from element concentrations in the Tengchong tin belt,SW China

Concentration of elements or element groups in a geological body is the result of multiple stages of rockforming and ore-forming geological processes.An ore-forming element group can be identified by PCA(principal component analysis)and be separated into two components using BEMD(bi-dimensional empirical mode decomposition):(1)a high background component which represents the ore-forming background developed in rocks through various geological processes favorable for mineralization(i.e.magmatism,sedimentation and/or metamorphism);(2)the anomaly component which reflects the oreforming anomaly that is overprinted on the high background component developed during mineralization.Anomaly components are used to identify ore-finding targets more effectively than ore-forming element groups.Three steps of data analytical procedures are described in this paper; firstly,the application of PCA to establish the ore-forming element group;secondly,using BEMD on the o re-forming element group to identify the anomaly components created by different types of mineralization processes; and finally,identifying ore-finding targets based on the anomaly components.This method is applied to the Tengchong tin-polymetallic belt to delineate ore-finding targets,where four targets for Sn(W)and three targets for Pb-Zn-Ag-Fe polymetallic mineralization are identified and defined as new areas for further prospecting.It is shown that BEMD combined with PCA can be applied not only in extracting the anomaly component for delineating the ore-finding target,but also in extracting the residual component for identifying its high background zone favorable for mineralization from its oreforming element group.     

An integrated ore prospecting model for the Nyasirori gold deposit in Tanzania

The Nyasirori gold deposit, located in the middle-western end of the Musoma-Mara Archean greenstone belt in Tanzania, is a tectonic altered rock type gold deposit controlled by shear tectonic zone. This work conducted high-precision ground magnetic measurements to delineate fault structures and favorable prospecting targets, utilized induced polarization (IP) intermediate gradient to roughly determine the distribution and extension of the tectonic altered zone and gold ore (mineralized) bodies, and further carried out IP sounding and magnetotelluric sounding to locate the tectonic altered zone and gold ore (mineralized) bodies. The anomalous gradient belt of the combination of positive and negative micromagnetic measurements reflects the detail of shallow surface tectonic alteration zone and gold mineralization body. Micromagnetic profile anomalies indicate the spatial location and occurrence of concealed tectonic alteration zone and gold (mineralized) ore bodies. Soil geochemical measurements indicate that the ore-forming element Au correlates well with As and Sb, and As and Sb anomalies have a good indication to gold orebodies. Based on the multi-source geological-geophysical-geochemical information of the Nyasirori gold deposit, this work established an integrated prospecting model and proposed a set of geophysical and geochemical methods for optimizing prospecting targets.     

Estimate of contribution of near-inertial waves to the velocity shear in the Bay of Bengal based on mooring observations from 2013 to 2014

Near-inertial motions contribute most of the velocity shear in the upper ocean. In the Bay of Bengal (BoB), the annual-mean energy flux from the wind to near-inertial motions in the mixed layer in 2013 is dominated by tropical cyclone (TC) processes. However, due to the lack of long-term observations of velocity profiles, our knowledge about interior near-inertial waves (NIWs) as well as their shear features is limited. In this study, we quantified the contribution of NIWs to shear by integrating the wavenumber-frequency spectra estimated from velocity profiles in the upper layers (40?440 m) of the southern BoB from April 2013 to May 2014. It is shown that the annual-mean proportion of near-inertial shear out of the total is approximately 50%, and the high contribution is mainly due to the enhancement of the TC processes during which the near-inertial shear accounts for nearly 80% of the total. In the steady monsoon seasons, the near-inertial shear is dominant to or at least comparable with the subinertial shear. The contribution of NIWs to the total shear is lower during the summer monsoon than during the winter monsoon owing to more active mesoscale eddies and higher subinertial shear during the summer monsoon. The Doppler shifting of the M₂ internal tide has little effect on the main results since the proportion of shear from the tidal motions is much lower than that from the near-inertial and subinertial motions.     

Mechanical properties of calcareous silts in a hydraulic fill island-reef

Abstract

The mechanical characteristics of calcareous silt interlayers play an important role in the stability of island-reef foundations. Direct shear and consolidation tests were performed to study the relationship between the mechanical properties and the physical parameters of calcareous silt. Based on the consolidation test results and analysis of the settling examples, different calculation methods for soil settling were compared. The results show the following. (1) The relationship between the cohesion and water content of calcareous silt can be represented by an M-shaped curve. The water contents corresponding to the two peaks of the M-type curve increase with increasing dry density. (2) When the dry density is less than 1.33?g/cm³, increasing the density significantly improves the internal friction angle of calcareous silts. When the dry density of the calcareous silt is greater than 1.33?g/cm³, the internal friction angle is affected by both the dry density and the water content. (3) The shear strength decreases when the water content exceeds the optimum level. (4) The compressive modulus of calcareous silt is larger than that of terrigenous silt. Specifically, it decreases with decreasing dry density and increasing water content. (5) The stepwise loading method should be used to estimate the soil settling before fill engineering construction.     

The recognition of former melt flux through high‐strain zones

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.     

Conditional statistics of Reynolds shear stress in flow over 2D dunes in the presence of surface waves

This study presents the analysis of the velocity fluctuations to describe the conditional statistics of Reynolds shear stress in flow over two‐dimensional dunes in the presence of surface waves of varying frequency. The flow velocity measurements over the dunes are made using a 16‐MHz 3D acoustic Doppler velocimeter. The joint probability distributions of the normalized stream‐wise and vertical velocity fluctuations at different vertical locations are calculated in the trough region of a selected dune in quasi‐steady region of the flow. Third‐order moments of the stream‐wise and vertical velocity components over one dune length are also calculated throughout the flow depth for understanding the effect of surface waves on relative contributions to the Reynolds shear stress due to the four quadrant events. The structure of instantaneous Reynolds stresses is analysed using quadrant analysis technique. It has been shown that the contributions of second and fourth quadrant events to the Reynolds shear stress increase with increase in the frequency of surface waves. In fact, the largest contribution to turbulent stresses comes from the second quadrant. The cumulant discard method is applied to describe the statistical properties of the covariance term u′w′. Conditional statistics and conditional sampling are used to compare the experimental and theoretical relative contributions to the Reynolds shear stress from the four quadrant events. Copyright © 2013 John Wiley & Sons, Ltd.     

An extended finite volume method and fixed-stress approach for modeling fluid injection–induced tensile opening in fractured reservoirs

Fluid injection–induced tensile opening is modeled using an extended finite volume method (XFVM). An embedded fracture strategy is used for the flow problem, that is, the fractures are discretized using finite volume segments without resolving the grid around them. Further, the discontinuities across fractures are modeled using special basis functions. The fracture openings due to enhanced fluid pressure and the associated shear slip due to traction free boundary condition on the fracture segments are both modeled using these special discontinuity basis functions. Mass transfer between fractures and matrix is modeled using the pressure difference. The enhancement of fracture storativity due to tensile opening leads to stronger coupling between flow and mechanics. An iterative scheme relying on the fixed-stress approach for fractures, which conserves the stress dependent terms over each iteration of the flow problem, has been introduced. Tensile opening has been simulated for single fractures embedded in two- and three-dimensional matrices. The convergence criterion for sequentially implicit fixed-stress scheme for fractures embedded in elastic media is established and has been validated numerically. Further, for 2D simulations, the effect of the matrix permeability for fracture propagation due to tensile opening has been studied.     

新疆阿尔泰别也萨麻斯稀有金属矿床含矿伟晶岩与花岗岩围岩成因关系

别也萨麻斯矿床是目前新发现的分布在新疆北阿尔泰以Li矿化为主的花岗伟晶岩型稀有金属矿床,具有独特性和代表性。矿区发育Li-Nb-Ta矿化和Nb-Ta矿化两类伟晶岩,二云母二长花岗岩是含矿伟晶岩脉群的直接围岩。在系统的野外地质特征调查(包括野外露头和钻孔岩芯赋矿岩系、矿化特征、蚀变类型等的详细观察)基础上,对含矿伟晶岩和二云母二长花岗岩开展了LA-ICP-MS锆石U-Pb定年和原位Hf同位素研究。获得锆石206Pb/238U加权平均年龄分别为(151.0±1.8)Ma和(449.0±4.2)Ma,含矿伟晶岩形成于晚侏罗世,二云母二长花岗岩则形成于晚奥陶世。含矿伟晶岩和二云母二长花岗岩的εHf(t)值分别为0.62~1.30和1.35~6.07,二阶段Hf模式年龄为1161~1118 Ma和1345~1037 Ma。含矿伟晶岩的εHf(t)值较花岗岩小得多,二阶段Hf模式年龄与形成年龄的差值较花岗岩大得多,表明两者是阿尔泰造山带在不同演化阶段下的产物。悬殊的年龄差、不同的大地构造背景与不同的形成物源表明别也萨麻斯稀有金属矿床含矿伟晶岩与二云母二长花岗岩在成因上并无联系,近矿花岗岩围岩并非含矿伟晶岩脉的真正母体。     

公路走廊带景观破碎度的空间分异研究

近年来,我国公路对自然生态环境的影响随着通车里程的增加而日益显著。在公路选线的过程中,全面分析拟建公路走廊带内景观破碎度的空间分异特征,可有效减少公路修建对生态环境的不利影响。本文利用遥感分类技术和GIS(地理信息系统)空间分析方法,以湖南长湘公路走廊带某段土地斑块和景观分类为基础,借助斑块密度指数、最大斑块指数和相似邻近比指数,在斑块类型水平和景观水平两个层面全面分析公路走廊带内自然林地景观、农业景观和城乡建设景观破碎度的空间分异特征。结果表明:长湘公路走廊带内景观破碎度高的地区主要分布在大型斑块边缘、平原地区以及公路沿线;自然林地景观和农业景观的破碎度较低,城乡建设景观的破碎度较高;城乡建设景观的破碎度与公路相关性最强,表现出顺应公路走向的条带状蔓延特征。该研究成果可为公路选线方案的制订和完善提供环境影响方面的参考。