基于性能的抗震设计方法在剪力墙结构中的应用

本文对基于性能的抗震设计方法中最具有代表性的直接基于位移的设计方法在剪力墙结构中的应用进行了研究。采用结构非线性分析程序探讨了墙厚、混凝土强度等级、纵筋配筋率、钢筋级别、轴压比、墙长等因素对单肢剪力墙屈服位移的影响,从而对现有的屈服曲率计算公式进行了改进。另外将按顶点荷载作用下的屈服位移计算公式求出的屈服位移与实际倒三角形荷载作用下的剪力墙屈服位移进行了比较,,从而推导出倒三角形荷载作用下的屈服位移计算公式。     

轴压比对中等高度LC结构剪力墙抗震性能的影响

轻骨料混凝土(L ight-we ight concrete,简称LC)剪力墙的轴压比是剪力墙抗震设计时一个重要的控制因素,直接关系到其延性性能。为使设计规程具有足够的理论依据,本文通过对六榀轻骨料混凝土剪力墙试件的试验,研究了在低周反复荷载作用下,着重考虑不同轴压比对中等高度有边框剪力墙的破坏形态和变形性能的影响效应,对其滞回特性进行分析,计算了各剪力墙的刚度退化率与延性系数,并将无竖缝剪力墙与带竖缝剪力墙的抗震性能进行了对比。     

DGZ-1多功能共振柱常规试验可靠性分析

针对新研制的多功能共振柱讕验机常规土类试验,发展此类仪器的试验可靠性分析理论,建立一套检验自身可靠性的分析方法傌技术,包括试验误差分析、试验定量考核、土工试验等多种技术手段。首先建立了共振柱仪动剪切模量误差、应叐误差和阻尼比误差的分析公式,得到了几种主要影响因素及其对试验误差影响程度的新认识。同时,通过若干已知动剪切模量且频率和土频率相接近的钢杆和铝杆试件的自振和共振试验,定量上验证该仪器常规试验结果的可靠性;通过砂土和原状粘土常规试验,定性上检验土工试验结果的合理性。通过对新研制的多功能共振柱试验机的常规试验功能进行可靠性的自身检验,所有试验结果是令人满意和可靠的,结果符合现有规律的认识。     

钢-混凝土组合剪力墙抗震性能研究简述

钢-混凝土组合剪力墙可以充分发挥钢和混凝土2种材料的优势,改善传统钢筋混凝土剪力墙延性和耗能能力较差的缺点,在钢-混凝土混合结构中具有应用优势。本文简要介绍了国内外一些新型的钢-混凝土组合剪力墙,并简述了其抗震性能的研究现状,最后对一些关键问题进行了初步探讨。     

Parametric study on performance of bridge retrofitted by unseating prevention devices

1 Introduction Structural retro?t techniques (Roberts, 2005), such as restrainers, concrete shear keys, steel jackets, CFRPshells, base isolators, or dampers have been widely studied and implemented in actual structures based on the experiences learned from past earthquakes. In the Chi-Chi earthquake (EERI, 2001), the damage to simply-supported PCI girder bridges provided a different view from which to examine the function of a rubber bearing system for simply- supported bridges (NCREE,…     

地震荷载下土层变形等级预测方法研究

以计算结果可靠的土层反应结果为基础数据,基于随机森林算法(Random Forest,简称"RF"),建立地震动、场地土层参数特征量与土层变形特征的关系,提出一种依据常规地震动和场地土层参数为特征量的地震荷载下土层变形等级预测新方法,给出了典型场地土体发生大应变的地震动阈值.结果表明:基于RF模型对土体的变形程度预测结...     

黄河三角洲潮滩剖面特征

利用验潮、潮滩水准测量、沉积物分析和遥感资料,分析了黄河三角洲不同岸段潮滩的特征。水准测量表明,侵蚀潮滩剖面形态为下凹,而淤积潮滩则上凸,由高潮线至低潮线,潮滩沉积物均变粗,这种变粗趋势在北部侵蚀岸段和河口侧缘明显,在河口南侧稳定海岸则不明显。潮滩沉积物含水量为12.2%~32.2%,平均为21%,海滩表层沉积物不排水剪切强度在0.1~0.35 kg/cm2之间。受局限岸滩的平面形态和剖面形态受到周围大坝地形影响,具有和砂质海滩类似的形态,显示波浪对该潮滩的作用强烈,根据剖面测量结果与遥感图像,发现河口北侧有一个小的冲积扇。     

Undrained monotonic shear behavior of marine soft clay after long-term cyclic loading

Abstract

In the coastal area, nearshore and offshore structures have been or will be built in marine soft clay deposits that have experienced long-term cyclic loads. Therefore, the mechanical behavior of marine clay after long-term cyclic loading needs to be investigated. In this research, a series of monotonic and cyclic triaxial tests were carried out to investigate the postcyclic mechanical behavior of the marine soft clay. The postcyclic water pore pressure, shear strength and secant stiffness are discussed by comparing the results with the standard monotonic test (without cyclic loading). It is very interesting that the postcyclic behavior of marine soft clay specimen is similar to the behavior of overconsolidated specimen, that is, the specimen shows apparent overconsolidation behavior after long-term cyclic loading. Then relationship between the overconsolidation ratio and the apparent overconsolidation ratio is established on the basis of the theory of equivalent overconsolidation. Finally, a validation formula is proposed which can predict the postcyclic undrained shear strength of marine soft clay.     

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.     

Effect of nano-MgO on mechanical performance of cement stabilized silty clay

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.