Determination of S-wave velocity structure using microtremors and spac method applied in Thessaloniki (Greece)

Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the V_s velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of V_s profiles reached a depth of 320 m. Comparisons with V_s values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the V_s profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein.     

Evaluation of soil liquefaction in the Chi-Chi, Taiwan earthquake using CPT

During the 1999 Chi-Chi, Taiwan earthquake, many sand boiling phenomena were observed in central Taiwan, which caused severe ground settlement and structure damages. According to the installed accelerograms, the peak ground surface horizontal accelerations in the liquefaction-affected areas range from 774.42 to 121.3 gal. The writers carried out an extensive investigation of soil liquefaction in this earthquake. In this paper, we present results of the CPT exploration and post-earthquake liquefaction analysis. Two hundred and seventy five (275) cone penetration test data were collected from the liquefaction-affected areas, and 46 liquefaction case histories and 88 non-liquefaction case histories were derived that can be used to evaluate the accuracy of existing liquefaction evaluation models. In addition, the strength of the liquefied soils after earthquake and the implication of its liquefaction potential in the future event are discussed.     

Analysis of parameters of ground vibration produced from bench blasting at a limestone quarry

The aim of this study is to predict peak particle velocity level at a limestone quarry located in Istanbul, Turkey. The ground vibration components were measured for 73 blast events during the bench blast optimization studies during a long period. In blasting operations; ANFO (blasting agent), gelatine dynamite (priming) and NONEL detonators (firing) were used as explosives at this site. Parameters of scaled distance (charge quantity per delay and the distance between the source and the station) were recorded carefully and the ground vibration components were measured by means of vibration monitors for every event. Then, the data pairs of scaled distance and particle velocity were analyzed. The equation of scaled distance extensively used in the literature was taken into consideration for the prediction of peak particle velocity. At the end of statistical evaluations, an empirical relationship with good correlation was established between peak particle velocity and scale distance for this site. The established relationship and the results of the study are presented.     

Earthquake relocation and 3-dimensional crustal structure of P-wave velocity in cen-tral-western China

IntroductionUnderstandingthemechanismofcontinentalearthquakesisveryimportantforseismichaz-ardpreventionandearthquakeprediction.Themodernseismotectonictheoryandtheideaofearthquakepredictionaredevelopedmainlyfromthestudiesoninterplateearthquakes,whicharedifficulttoexplainthephenomenaofintraplateearthquakes,suchasthecontinentalearthquakesoccurredinChinesemainland.Whiletheinterplateearthquakesoccurredalongtheplatebounda-ries,theintraplateearthquakesdistributediffuselyintheinterioroftheplates.Thus…     

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.     

叠前深度偏移述评

叠前深度偏移是理想的改善复杂地区和强横向速度变化的地震资料成像技术,笔者就4种典型叠前深度偏移方法的理论基础与技术特点,存在的问题及国内外最新进展进行了讨论.     

Detection of Methane Hydrate-Bearing Zones from Seismic Data

Abstract. The MITI Nankai Trough wells were drilled offshore Japan in the Tokai area in 1999 and 2000. The occurrence of methane hydrate was confirmed by various indicators in the borehole logs and from core data. These findings have a large impact on potential future Japanese energy resources and other related-scientific interests.
We first tried to find the methane hydrate-bearing zones using interval velocities derived from NMO velocity analysis. However, this analysis produced poor resolution. To achieve a more detailed delineation of the gas hydrate- and gas-bearing zones, we executed a seismic impedance inversion calibrated by the logs from two of the MITI Nankai Trough wells. Although these two wells are only about 90 m apart, we were able to produce an impedance section with fine detail by adopting a simple initial model and incorporating physical properties of the methane hydrate-bearing zones. The locations of the methane hydrate-bearing zones are readily apparent in the final section.     

Blast Induced Damage and Dynamic Behaviour of Hangingwalls in Bench Stoping

This paper presents the results of a comprehensive monitoring program designed to investigate the extent of blast induced damage experienced by rock masses extracted by bench stoping methods. An array of triaxial geophones and extensometers were used to monitor blast vibration attenuation and measure hangingwall deformations during stope extraction. In addition, pre and post surveys of the hangingwall rock mass were conducted using a TV borehole camera and cavity survey instrumentation. These surveys were later used to calibrate damage profiles into the stope hangingwalls.

Peak particle velocity, hangingwall deformation measurements and stope surveys were used to develop a site specific damage model that allowed engineers to asses drilling and blasting configurations to minimise the extent of pre-conditioning and damage. In addition the study included the analysis of the frequency response, displacements and accelerations experienced by the excavation as extraction and mine filling progressed. This work aimed at improving our understanding of the influence of blasting on the dynamic behaviour of stope hangingwalls.

The study demonstrated that estimates of the maximum extent of rock mass pre-conditioning and/or damage made through the application of the Holmberg-Persson approach compared well with measured results. In addition, the study found that dynamic loading imparted on an exposed hangingwall from subsequent stope blasting was also expected to contribute to rock mass weakening and that mine filling was crucial to arrest further deterioration. Hangingwall accelerations were used to demonstrate that larger openings may be more susceptible to dynamic loading.     

Determination of the elastic modulus set of foliated rocks from ultrasonic velocity measurements

Ultrasonic measurements of compressional and shear wave velocities under hydrostatic pressure up to 70 MPa were carried out on cylindrical specimens cored across and along the foliation planes. Our measurements revealed that the foliation of the metamorphic rocks induces a clear velocity anisotropy between two orthogonal directions; faster along the foliation plane and slower across the plane in most rock types. All velocity components monotonically increase with the confining pressure, probably due to the closure of microcracks distributed in rock specimens. We determined the complete set of dynamic moduli of foliated metamorphic rocks with two assumptions; transverse isotropy due to the foliation and ellipsoidal seismic energy propagation from a point source. The calculated elastic moduli referring to different directions could be valuable for the design of various engineering structures in planar textured rock mass.     

描述黄河中下游河道横断面形态的新指标

描述河流横断面的窄深程度,无非是用来衡量它对过流能力和输沙能力的影响大小,及其在河流地貌方面的时空上的调整变化。回顾总结了以往描述横断面形态的常用指标,包括河相系数、宽深比,或湿周与平均水深的比值,指出这几种指标在描述黄河中下游河道时所存在的共同缺点:(1)缺乏物理意义;(2)不能真正代表断面的窄深程度;(3)明显的夸大了宽浅和窄深断面的差别。从表称流量的概念出发,作者认为,应该使用具有明确物理意义的等面积的表称流速来描述断面形态。如果用表称流速来衡量黄河下游河南和山东河道的断面形态的差别,就会发现,断面形态的不同,其对过流能力的影响不过1:2,远不象河相系数和宽深比所描述的达到1:6甚至1:11那样的悬殊程度;黄河下游河道主槽“多来多排”的主要影响因素是表称流速。