煤炭采空区处理的新方法与实例分析

位于乌鲁木齐市南湖路以西的煤炭采空区面积达67 100.5m^2,区内构造从南到北主要由八道湾向斜和七道湾背斜组成,地层产状变化不大。该矿区开采较深,且采空区塌陷区有明显的地下水活动迹象。在对深孔大体积采空区注浆时,比较各种常见注浆治理方法,均存在不同的制约因素,故决定采用灌浆爆破压密法对采空区进行压实加固。经现场爆破试验,该区重复爆破次数在3～5次左右。灌浆爆破压密处理后,对不同土层进行取样对比分析,得到其相应密度（增加）及空隙比（减少）的变化分别为：杂填土14.1%,-7.9%;素填土5.9%,-3.3%;塌落煤层7.8%,-7.7%。根据压缩数据及现场测量,处理后的土体沉降2～4m,部分空体地段的沉降量达10～20m,治理效果明显。     

鱼耳石中锶和钡富集的影响因素及其环境响应

鱼耳石中元素锶和钡主要来源于鱼类生存的水体,这两种元素通过腮或肠进入内耳淋巴液,继而以类质同象的方式沉淀在耳石晶格内部空位和晶格间隙中。耳石结晶沉淀的整个过程不仅受生物的调控作用,而且还受到外界环境,如水体元素浓度、盐度、温度等因素的影响,因此耳石中某种元素的浓度与其在水体中的浓度之比(元素富集系数)与鱼类所生存的环境之间具有一定的响应关系。在以上各种因素中,水体元素浓度对耳石元素富集系数的影响最为显著。一般来说,耳石中某种元素的含量与水体中相应的元素浓度呈正相关关系,而水体中元素之间就耳石中的富集过程也存在一定的相互促进或抑制作用,如Sr对Ba为协同作用,Ca对Sr、Zn为拮抗作用。另外,水体盐度或温度与元素富集系数之间不存在简单的线性相关关系,而是因鱼种、水体综合环境及元素种类不同而有所差异。研究结果表明:鱼种一定的情况下,耳石中元素富集系数与水体盐度和温度存在良好相关关系。基于以上相关性分析,可以认为耳石中元素富集系数与环境因子(水体元素浓度、盐度、温度)之间存在响应关系。因此,可以选用那些受环境影响大但对自身调控影响小的元素(如:Sr、Zn、Pb、Mn、Ba、Fe、Li、Ni、Cd)来建立耳石与水体环境之间元素富集系数的定量化模型,并利用这种响应关系及定量化模型进行生态环境监测和渔业管理。     

基于GPS技术监测高层建筑物变形的研究

以武汉大学信息学部教学实验大楼为实验对象,分析了大楼在N、E、U方向上的每h变化、d变化及变形规律,阐明GPS技术在高层建筑变形监测中的应用。     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

基于改进PSO-SVM的噪声稳健建筑物变形监测方法

对高层、超高层建筑物进行实时,高精度的变形监测对提前预防安全隐患,保证人民生命财产安全具有重要意义。建筑物变形作为一种典型的随机性和微弱性过程,噪声等误差的存在会影响从中提取有用的变形信息。针对该问题,提出一种改进粒子群(Particle Swarm Optimization,PSO)算法优化支持向量机(Support Vector Machine,SVM)的噪声稳健建筑物变形监测方法,利用改进PSO算法的全局搜索能力对SVM的核参数进行优化,提升预测精度的同时增强算法的噪声稳健性。基于实测数据的试验结果表明,相对于传统交叉验证SVM和小波方法,所提方法可以获得更高的变形预测精度,并且在低信噪比条件下优势更加明显。     

The role of bathymetry and directional wave conditions on observed crescentic bar dynamics

Nearshore sandbars are important features in the surf zone of many beaches because they strongly influence the mean circulation and evolving morphology. Due to variations in wave conditions, sandbars can experience cross-shore migration and vary in shape from alongshore uniform (shore-parallel) to alongshore rhythmic (crescentic). Sandbar dynamics have been studied extensively, but existing observational studies usually do not quantify the processes leading to crescentic bar formation and straightening. This study analyses the dynamics of crescentic bar events at the fetch-limited beach of Castelldefels (northwestern Mediterranean Sea, Spain) using 7.5 years of hourly time-exposure video images and detailed wave conditions. The results show that, despite the generally calm wave conditions, the sandbars were very dynamic in the cross-shore and longshore directions. They often migrated rapidly offshore during storms (up to 70 m in one day) and more slowly onshore during post-storm conditions. Crescentic bars were often present at the study site (48% of the time), but only when the sandbar was at least 10 m from the shoreline. They displayed a large variability in wavelengths (100–700 m), alongshore migration speeds (0–50 m/day) and cross-shore amplitudes (5–20 m). Wavelengths increased for larger bar–shoreline distances and the alongshore migration speeds were strongly correlated with the alongshore component of the radiation stresses. Crescentic patterns typically developed during low–medium energetic waves with limited obliquity ( $\theta \lesssim 20$° at 10 m depth), while bar straightening occurred during medium–high energetic waves with strong oblique angles of incidence ( $\theta \gtrsim 15$°). Overall, this study provides further proof for the important role of wave direction in crescentic bar dynamics and highlights the strong dependence of crescentic bar development on the initial bathymetric configuration.     

A laboratory experiment to monitor the contact state of a fault by transmission waves

We performed a series of laboratory experiments in which elastic waves were transmitted across a simulated fault. Two types of experiments were carried out: (1) Normal Stress Holding Test (NSHT): normal stress was kept constant for about 3 h without shear stress and transmission waves were observed. (2) Shear Stress Increasing Test (SSIT): shear stress was gradually increased until a stick-slip event occurred. Transmission waves were continuously observed throughout the process of stress accumulation. We focused on the change in transmission waves during the application of shear stress and especially during precursory slips.It was found in NSHT that the amplitude of transmission waves linearly increased with the logarithm of stationary contact time. The increase amounted to a few percent after about 3 h. Creep at asperity contacts is responsible for this phenomenon. From a theoretical consideration, it was concluded that the real contact area increased with the logarithm of stationary contact time.We observed in SSIT a significant increase in wave amplitude with shear stress application. This phenomenon cannot be attributed to the time effect observed in NSHT. Instead, it can be explained by the mechanism of “junction growth” proposed by Tabor. Junction growth yields an increase in real contact area. It is required for junction growth to occur that the material in contact is already plastic under a purely normal loading condition. A computer simulation confirmed that this requirement was satisfied in our experiments. We also found that the rate at which the amplitude increased was slightly reduced prior to a stick-slip event. The onset time of the reduction well coincides with the onset of precursory slip. The cause of the reduction is attributed to the reset of stationary contact time due to displacement. This interpretation is supported by the result of NSHT. Taking the time of stationary contact in SSIT into account, we may expect the change in wave amplitude to be, at most, only a few percent. The observed slight reduction in increasing rate is, in this sense, reasonable. The static stiffness of the fault also decreases with precursory slip. It was also found that low frequency waves are a better indicator of precursory slip than high frequency waves. This might suggest that low frequency waves with longer wavelength are a better indicator of average behavior of faults. The problem, however, merits a further investigation. The shifts in phase were also found to be a good indicator of the change in contact state of the fault. The changes in both amplitude and phase of transmission waves are unifyingly understood through the theory of transmission coefficient presented by Pyrak-Nolte et al. Rough surfaces have a tendency to give larger stick-slips than smooth surfaces. The amount of precursory slip is larger for rough surfaces than for smooth surfaces. Although it was confirmed by a computer simulation that rough surfaces have larger contact diameters than smooth surfaces, the rigorous relationship between the surface roughness (contact diameter) and the amount of precursory slips was not established.     

Slope instability of San Miniato hill (Florence, Italy): possible deformation patterns

The hill of San Miniato (Florence, Italy) has been repeatedly identified in the past as the site of a slow moving, intermittent landslide. Possible hypotheses regarding the mechanisms responsible for past movements and for cracks and fissures present today are formulated based on the comparison of historical information and processed monitoring data. Although it is not possible to completely exclude a large inactive landslide that involves the entire northern slope, it seems more probable that the slide, if it does exist, is no longer active and that present-day damage is due to separate shallow movements concentrated in man-made deposits. This hypothesis can only be verified with a temporal extension of the monitoring activities, necessary in any case for planning possible safeguarding measures for the cultural heritage in the area.     

Real Time Analysis and Forecasting of Strata Caving Behaviour during Longwall Operations

Summary. Discontinuous manual observations and irregular caving characteristics of roof rocks often lead to improper decisions resulting in accidents and production loss. Hence, systematic monitoring of the hanging roof behind the chock shields is necessary for safe and productive mining operations. A real-time application was successfully implemented in an Indian mine for forecasting of hanging roof behaviour to enhance safety and productivity. This paper reports the functioning of real-time TWAP (time weighted average pressure) analysis in the forecasting of hanging roof behaviour in real time.     

青藏高原清水河多年冻土区铁路路基沉降变形特征研究

通过埋设在青藏铁路路基中两个断面内的6条沉降观测管3 a来的地基沉降变形资料,研究了高原多年冻土区铁路路基的沉降变形特征,分析了填筑铁路路基对下伏多年冻土融化变形的影响。研究表明,由于受到填筑路基时赋存在路基填料内的热量的影响,铁路路基下伏多年冻土上限在施工初期会有一个明显的下移沉降,铁路路基也随之有一个较大幅度的工后下沉变动,随着时间的推移,路基下降速率会逐渐下降,但在短时间内不会停止下来,而且由于太阳辐射和路基边坡形状的影响,路基向阳面与背阴面的变形有较大的差别,且在近南北向展布的路基上表现最为明显。