A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

Paleoenvironmental records of water level and climatic changes from the middle to late Holocene at a Lake Erie coastal wetland, Ontario, Canada

Pollen and diatom assemblages, and peat stratigraphies, from a coastal wetland on the northern shore of Lake Erie were used to analyze water level and climatic changes since the middle Holocene and their effects on wetland plant communities. Peat deposition began 4700 cal yr B.P. during the Nipissing II transgression, which was driven by isostatic rebound. At that time, a diatom-rich wild rice marsh existed at the site. Water level dropped at the end of the Nipissing rise at least 2 m within 200 yr, leading to the development of shallower-water plant communities and an environment too dry for most diatoms to persist. The sharp decline in water level was probably driven primarily by outlet incision, but climate likely played some role. The paleoecological records provide evidence for post-Nipissing century-scale transgressions occurring around 2300, 1160, 700 and 450 cal yr B.P. The chronology for these transgressions correlates with other studies from the region and implies climatic forcing. Peat inception in shallow sloughs across part of the study area around 700 cal yr B.P. coincides with the Little Ice Age. These records, considered alongside others from the region, suggest that the Little Ice Age may have resulted in a wetter climate across the eastern Great Lakes region.     

Speciation analysis and significance of ecological geochemistry

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.     

Berriasian (Lower Cretaceous) brachiopods from the Crimea

Four successive assemblages of Berriasian brachiopods distinguished for the first time in the Crimea are correlated with concurrent subdivisions of the ammonoid scale. Berriasian brachiopods are represented by 44 species of 27 genera and 14 families, which are most complete in terms of taxonomic composition as compared to other concurrent brachiopod faunas known elsewhere. The assemblages are dominated by local species. As is proved, the Berriasian brachiopods studied are appropriate for age determination, subdivision and correlation of their host deposits. Their geographic distribution that has been analyzed elucidates connections of the Berriasian sea basins within the Mediterranean paleozoogeographic region.     

Gzhelian fusulinids first discovered in central Iran

Gzhelian deposits established in Iran for the first time are described. They rest with a considerable hiatus on the Moscovian deposits constituting, along with Asselian strata, an integral carbonate succession of the Zaladu Formation in eastern Iran. The Zaladu Formation is correlative with the Vazhnan Formation of the Abadeh region (central Iran) and the Dorud Formation of the Elburz (Alborz) Mountains. An assemblage of Gzhelian fusulinids from the studied section is well comparable with the assemblage of the Ultradaixina bosbytauensis Zone distinguished in the uppermost Gzhelian of the Darvaz, Fergana, the Southern Urals, Donetsk Basin, and Carnic Alps. Two new species of the genus Schellwienia (Sch. anarakensis and Sch. stocklini) are described. Gzhelian and Asselian fusulinids found in the section are figured in two paleontological plates.     

吉尔嘎朗图凹陷宝饶洼槽下白垩统层序地层与沉积体系

运用高分辨率层序地层学原理和方法,通过对钻井和地震资料的综合分析,在二连盆地吉尔嘎朗图凹陷下白垩统中识别出1个超长期基准面旋回(二级层序)SSC1和5个长期基准面旋回(三级层序):LSC1,LSC2,LSC3,LSC4,LSC5,分析了各旋回的发育特征。识别出五种类型的沉积体系:滨浅湖近岸水下扇、较深水湖浊积扇、滨浅湖扇三角洲、滨浅湖辫状河三角洲和河流沉积体系,并在等时地层格架内分析了各基准面旋回的沉积体系构成和储层砂体的发育情况。综合分析生、诸、盖条件后认为,在垂向上,LSC3旋回为本区最有利的储集层段,在平面上,本区的油气勘探应主要寻找宝饶构造带辫状河三角洲前缘砂体,主要储层砂体类型为前缘分流水道砂和前缘席状砂。     

地震属性分析中水平切片的应用

利用地震数据体中含有的丰富地质信息,可以有效地进行储层预测。层拉平水平切片地层学解释方法是先将地震剖面目的层段做层拉平处理,然后对切片顺地层层面追踪,勾绘出各种地层现象,并以地层学的观点加以解释。该方法在吉林探区扶新南部地区的应用中,对于识别河道的展布趋势取得了较好的效果,而且发现了多期叠置的扇型沉积体。另外,还可指导反演数据体的解释,做到对岩性体从定性到定量的描述。     

黄骅坳陷扣村地区古近系沙三段高分辨层序地层分析

通过利用钻井、测井、地震等多种资料，以黄骅坳陷扣村地区古近系沙三段为例，详细论述了开展高分辨层序地层分析的研究流程、方法．在四级层序格架确定的基础上，叙述了以一般湖泛面和更小级别的岩性和结构层序单元界面的识别与类型的确定．指出通过露头、岩心、测井曲线和高分辨地震信息，可以确定短期旋回界面与超短期旋回界面．根据工区的特点选取主干剖面，建立高分辨率层序地层网络格架对比剖面，开展长、中、短期基准面旋回的分析、高分辨率层序地层的单砂体展布分析及其沉积微相研究．     

羌塘盆地那底岗日地区中侏罗世层序地层与碳、氧、锶同位素响应

羌塘盆地那底岗日地区中侏罗世沉积了一套稳定的滨浅海相碳酸盐岩与碎屑岩地层,通过层序地层研究划分出五个三级层序。对其中四个层序内碳酸盐岩碳、氧、锶稳定同位素测试分析得出,不同层序、层序界面及层序内不同体系域的δ13 C、δ180、N(87Sr/86Sr)值均有明显的差异,并具规律性变化,整体上反映出研究区中侏罗世发生了多次海平面升降变化和气候、构造活动的演变,为层序地层研究提供了定量的地质地球化学依据。     

从近年来我国地层学的可喜进展谈地层学方法论

“乐平统”作为国际二叠系年代地层系统的最上一个统的全球对比标准 ,是我国学者金玉研究员为首的研究集体多年艰辛研究的结果 ;几乎同时 ,以陈旭研究员为首的科研集体以详尽的资料和全面系统的工作 ,在我国浙江黄泥塘剖面建立了中奥陶统达瑞威尔阶的全球层型剖面点——中国第一个“金钉子”剖面。这两项成就 ,是我国学者在上一世纪对地层学的显著贡献之一 ,从他们精雕细刻的剖面资料和详尽系统的研究成果中 ,可以研读出对“地层时代对比”这一博大精深的理论课题的工作方法 ,由此而诱发出对地层学方法论的探讨 ,从而对某些下结论还为时过早的问题进行必要的评述。