3S技术在神农架滑雪场生态环境影响评价中的应用

神农架滑雪场位于国家级自然保护区的边缘地带。运用景观生态学原理和方法,采用3S技术,对滑雪场景观生态体系的结构和功能状况进行评价,通过景观多样性指数、景观聚集度指数等指标量化计算及比较分析,预测了项目建成后对所在区域生态完整性的影响程度及将造成的敏感生态问题。结果表明,评价区自然系统的生物量将减少430.26 t,平均净生产力降低为881.55 g/m2.a,项目建设不会改变林地的模地地位,其对生态环境质量仍有较强的调控能力。3S技术结合景观生态学方法将生态环境影响评价由定性评价转向定量预测,为建设项目生态影响评价研究作了有益的探索。     

北大西洋地区气候准20年周期的观测和模拟分析

北大西洋地区除了存在约70 a周期的AMO（Atlantic Multidecadal Oscillation,北大西洋年代际振荡）之外,历史长期气候记录中英格兰温度（Central England Temperature,CET）与格陵兰冰芯净雪累计率还存在显著的20 a周期波动。本研究利用CCSM4（Community Climate System Model version 4）耦合模式工业革命前控制试验（piControl）结果中的海表面温度（Sea Surface Temperature,SST）,通过10～50 a带通滤波与扩展经验正交函数（Extended Empirical Orthogonal Function,EEOF）分解,得到在北大西洋副极地海区存在准20 a振荡的逆时针旋转模态。此周期与其临近地区的CET、格陵兰冰芯净雪累计率的准20 a振荡周期相吻合,说明这种北大西洋副极地海区准20 a振荡的海洋模态与其临近地区的大气准20 a振荡之间可能存在相应的联系。进一步利用CAM4（the Community Atmosphere Model version4）大气模式,以北大西洋副极地海区准20 a振荡SST旋转模态为强迫场进行敏感性试验,进一步验证了这种联系。     

长江流域蒸发皿蒸发量的区域变化特征及影响因素

基于长江流域148个气象站1980—2017年的蒸发皿观测数据,将旋转经验正交函数（REOF）和模糊C均值聚类（FCM）相结合,对流域蒸发皿蒸发量（PE）进行分区,然后运用Modified Mann-Kendall检验和多元逐步回归等方法,分析各子区域PE的变化特征并识别其主要影响因子。结果表明：1) REOF的前4个空间模态显示流域PE存在5个主要的异常敏感区,基于这4个空间模态,流域PE在空间上可划分为9个子区域。2）在年尺度上,各区PE呈不同程度的增加趋势,其中中部盆地区上升速率最大（111.28 mm/10 a）,西部高原区上升速率最小（12.5 mm/10 a）;而在季节尺度上,秋、冬季流域PE呈显著上升趋势,春、夏季PE的变化具有明显的区域差异性,部分地区PE为下降趋势。3）影响PE变化的主要因子因地而异,但大多子区域的PE变化与平均气温和饱和水汽压差的变化显著相关。     

基于孔压静力触探(CPTU)测试的连云港海相粘土前期固结压力确定方法研究

首先回顾了基于孔压静力触探(CPTU)测试确定前期固结压力的方法,通过连云港海相粘土场地进行的CPTU试验资料,以室内固结试验得到的前期固结压力作为参考值评估了经验方法预测前期固结压力的有效性。最简单的方法是直接建立前期固结压力和净锥尖阻力的关系,同时也是最有效的方法。     

粉喷桩的应用研究综述

粉喷桩具有低污染、低噪音、有效实用、施工简便快捷、施工工期短、技术效果好和费用底等特点而受到普遍关注,但其也存在一定的不足。本文分析了粉喷桩在工程中应用的研究现状,介绍了粉喷桩与其他工程措施相结合的实例,并对以后的研究方向提出了看法。     

Sea level induced variations in clay mineral composition in the southwestern South China Sea over the past 17,000 yr

Variations in clay mineral composition of sediment cores from the margin and continental slope of the Sunda Shelf (southern South China Sea, SE Asia) covering the past 17,000 yr reflect changing influences of sediment sources together with clay mineral partitioning processes in shallow waters. We identify the deglacial sea level rise as the principal factor driving these changes. During the late glacial, high values of kaolinite are interpreted to reflect a higher contribution of clays from soils that have formed on the exposed Sunda Shelf and in the southern archipelagos of Indonesia. At this time core sites were located in close proximity to the mouths of the Sunda Shelf palaeo-drainage systems on the emerged shelf (“Sundaland”). The progressive landward displacement of the coastline and breakdown of these vast drainage systems during deglaciation led to a decrease in influence of the kaolinite-rich southern sources. When the coastline had retreated closely to its present-day position in mid-Holocene times, the former dominance of southern sources was replaced by a stronger influence of illite-rich sources (e.g. Borneo). The overriding control of sea level changes on the clay mineral distribution patterns precludes a definite climatic interpretation of clay mineral data in terms of climatic/monsoonal changes in such highly dynamic sedimentary environment.     

脉宽调制型数字温度表

选择线性热敏电阻组成的脉宽电路 ,将脉宽作为控制计数的时间 ,由晶振产生某一标准频率的脉冲信号 ,通过分频以及计算译码驱动送显示。可直接显示温度数字。该设计省去 A/ D转换器 ,结构简单 ,成本低廉 ,灵敏度高 ,稳定可靠 ,使用方便。     

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.     

考虑冲刷影响的筒型基础竖向极限承载力研究

大直径宽浅式筒型基础,阻水宽度大,在位工作期间受波浪海流作用,其周围土体易被冲刷。为研究单侧地基土体受冲刷后筒型基础的竖向极限承载力变化,通过引进冲刷率的概念,采用有限元方法研究了不同冲刷率下筒型基础的竖向极限承载力;并基于Meyerhof理论建立了计算不同冲刷率下筒型基础竖向极限承载力的极限平衡方法。研究结果表明,随着冲刷率增大,筒型基础的极限承载力出现不同程度的下降,当冲刷率为0.8时,即筒型基础单侧土体冲刷深度达6.4 m时,筒型基础的竖向极限承载力折减率为3.28%。建立的极限平衡算法可准确计算冲刷条件下筒型基础的竖向极限承载力。     

有机质对海底沉积物中粘土矿物X射线衍射分析结果的影响

X射线衍射法广泛应用于分析粘土矿物的含量和结晶特征,由于粘土矿物易与有机质结合形成有机-粘土复合体,是否去除有机质对分析结果有很大影响,实验结果表明影响最大的是伊-蒙混层矿物(含蒙脱石)和伊利石的含量,为得到可靠实验数据,必须重视对样品的前处理工作,对不同批次样品应该保持一致的处理程序。