Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

广东红海湾、珠江口及电白—阳江近海第四纪沉积

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。     

Southern Segment of the European Geotraverse — a wide-angle seismic refraction experiment in the Sardinia Channel

The Sardinia Channel dataset was collected as part of the European Geotraverse (EGT)—a 4000 km seismic refraction line running from Northern Norway to the Sahara, designed to investigate the structure of the lithosphere beneath Europe. Wideangle seismic data recorded by ocean bottom seismometers deployed in the Sardinia Channel as part of the Southern Segment of the EGT, together with gravity data, were used to constrain the final crustal model. In the centre of the Channel the crust is identified as thinned continental in nature, with a crystalline thickness of 10 km overlain by 4 km of sediments and 2.5 km of water in the most extended region. High velocities in the lower crust in the central region are thought to represent an area of underplating or intrusion by igneous material caused by extension related to the opening of the Tyrrhenian Sea. The crust overlies an anomalously low velocity upper mantle.     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

冲绳海槽天然气水合物BSR的地震研究

根据多道地震反射资料分析,在冲绳海槽南部和中部发现了拟海底反射层(BSR)现象。通过对海底异常反射层的振幅特征、速度异常和AVO属性分析,说明该BSR可能反映了天然气水合物的存在,并发现冲绳海槽断层与天然气水合物的形成有密切关系。     

东营北部凸起带古冲沟储层分布规律研究

在油田勘探与开发中 ,充分认识古冲沟油气藏的勘探与开发是十分重要和有意义的。本文利用东营北部凸起带的地质、钻井、航磁和地震等资料 ,对古冲沟在地震剖面上的特征和古冲沟储层预测方法等进行了研究与探讨     

Casualties in dry bulk shipping (1963–1996)

In recent years, bulk carriers have been identified with high risks of catastrophic structural failure and foundering, and with heavy loss of human life. This study, based upon Lloyd's of London casualty records, identified four risk factors that had significant, independent effect upon the likelihood of a bulk carrier foundering. The risk of foundering increased with the age of the ship, and was related to the ship's flag of registration. Most importantly, however, increased risks were found for heavy cargoes of iron ore and scrap steel or iron, and for trading routes to the Far East and from Europe to North America. Additional safety measures, in particular regarding ship design and high-risk trades, may well be necessary to reduce the high casualty rates.     

思林水电站通航建筑物高边坡稳定分析和评价

应用ANSYS结构分析软件,模拟了思林水电站通航建筑物高边坡的地形、地质条件以及开挖的过程,建立边坡开挖的有限元计算分析模型,分析边坡在自然状态、分级开挖以及锚杆支护加固等工况下的应力、变形及其整体稳定性.定义单元的局部安全系数,得到了边坡开挖加固后稳定安全系数的分布.根据计算成果,指出现设计加固措施可以保证边坡稳定,无需增加其他工程措施.