太阳能供电系统在天津测震台站的应用

利用太阳能供电系统解决天津市部分台站无法接入交流供电的问题,对部分台供电系统进行改造,采用复合式供电模式,避免农忙或雷雨季节停电问题,以提升台网整体数据传输连续率。     

有流体参与作用下的震源参数特征——以广西凌云凤山震群、龙滩库区地震为例

对广西暴雨诱发的地震、水库地震及天然地震的地震波数字频谱参数特征进行分析;计算凌云凤山震群、2007—2013年广西桂东南地区天然地震及龙滩库区ML≥2.5级地震波形资料,获得凌云凤山震群、桂东南天然地震、龙滩库区地震震源参数。研究表明：凌云凤山震群和龙滩库区地震的应力降、震源尺度和拐角频率在数值范围、平均值都基本相同;它们的应力降和拐角频率明显小于桂东南地区地震,其中应力降约小1个量级;而它们的震源尺度明显大于同震级的桂东南地区地震。这些特征显示出数字地震波频谱分析也可较好地反映凌云凤山震群由暴雨诱发所致的成因。     

台站运行率自动检测系统的应用和技术要点

地震监测台站的实时运行率是测震台网运行评比中一个重要的指标。本文就如何运用java定时器来实现台站运行率自动检测进行探讨,介绍了黑龙江省地震台网台站实时运行率自动检测系统的实现。     

The inner inner core of the Earth: Texturing of iron crystals from three-dimensional seismic anisotropy

We present a three-dimensional model of the seismic anisotropy and texturing of iron crystals in the inner core. The form of the anisotropy changes suddenly at slightly less than half of the inner core radius. The outer part is composed of iron crystals of a single phase with different degrees of preferred alignment along the spin axis of the Earth. The inner part may be composed of a different phase of crystalline iron or have a different pattern of alignment.     

Precursory seismicity of the 1994 eruption of Popocatépetl Volcano,Central Mexico

Popocatépetl Volcano is located in the central Mexican Volcanic Belt, within a densely populated region inhabited by over 20 million people. The eruptive history of this volcano indicates that it is capable of producing a wide range of eruptions, including Plinian events. After nearly 70 years of quiescence, Popocatépetl reawakened in December 21, 1994. The eruptive activity has continued up until the date of this submission and has been characterized by a succession of lava dome growth-and-destruction episodes, similar to events that have apparently been typical for Popocatépetl since the fourteenth century. In this regime, the episodes of effusive and moderately explosive activity alternate with long periods of almost total quiescence. In this paper we analyze five years of volcano-tectonic seismicity preceding the initial eruption of the current episode. The evolution of the V-T seismicity shows four distinct stages, which we interpret in terms of the internal processes which precede an eruption after a long period of quiescence. The thermal effects of a magma intrusion at depth, the fracturing related to the slow development of magma-related fluid pathways, the concentration of stress causing a protracted acceleration of this process, and a final relaxation or redistribution of the stress shortly before the initial eruption are reflected in the rates of V-T seismic energy release. A hindsight analysis of this activity shows that the acceleration of the seismicity in the third stage asymptotically forecast the time of the eruption. The total seismic energy release needed to produce an eruption after a long period of quiescence is related to the volume of rock that must be fractured so imposing a characteristic threshold limit for polygenetic volcanoes, limit that was reached by Popocatépetl before the eruption.     

纪念李世雄教授去世一周年

在李世雄教授去世一周年之际,本文以笔者工作的领域为例,阐述他近20年来通过李群和李代数、微局部分析、调和分析、小波分析、独立分量分析方面的基础研究,为保结构方法在地震成像研究中的引入、反假频高频重建在储层预测中的引入作出的重要贡献.从而表达对李世雄教授的高尚人品和精妙学术教学水平的由衷敬佩.     

立面开大洞复杂高层结构的整体抗震性能评价

本文针对某平面不规则、立面开大洞、带高位转换层的超限复杂高层结构,首先建立了整体模型结构的非线性计算模型,根据振动台试验结果选择了材料非线性参数,进行了弹塑性时程分析,并对模型结构及参数进行了验证。用验证过的模型和参数对原型结构进行了弹塑性时程分析,并对该结构作出整体抗震性能评价。通过本文分析表明,按照试验微粒混凝土材性试验数据,考虑附加质量建立的计算模型,能较好地捕捉到整体结构初始时的频率、振型等动力特性;选择现有的软件确定构件的本构关系,将其输入通用程序进行弹塑性时程分析,能够获得结构的非线性动力反应;通过模型乃至原型结构的弹塑性时程分析,可以对该立面开大洞复杂结构整体抗震性能作出合理评价。     

钢框架结构的非线性静力抗震可靠性分析Ⅱ:可靠度指标及其灵敏度

将有限元反应及其灵敏度分析与结构可靠度分析的近似解析方法结合起来,可以进行具有隐式功能函数的大型复杂结构的可靠性分析。在基于位移的非线性纤维梁柱单元及其灵敏度直接微分表达式的基础上,通过力学变换、概率变换和反应灵敏度,将结构可靠度计算方法FORM和SORM与有限元方法有机地集成在一起。依据现行抗震设计规范,建立了钢框架结构典型构件承载能力和结构层间变形能力的抗震极限状态方程,利用地震作用的等效随机静力模型,采用非线性有限元静力可靠度方法,对一实际工程结构的抗震可靠度及其灵敏度进行了概率分析和评价,结果表明：尽管在大震作用下该结构的层间弹塑性变形可靠度较高,但是构件极限承载能力的可靠度指标较低,仍然存在失效的可能性。因此,仅验算“小震”作用下结构的承载能力可靠度和“大震”作用下结构的变形能力可靠度是不够的,还需要验算在“中震”和“大震”作用下结构的极限承载能力可靠度。     

Evaluating assumptions for seismic assessment of existing buildings

This paper evaluates the American FEMA 356 and the Greek GRECO (EC 8 based) procedural assumptions for the assessment of the seismic capacity of existing buildings via pushover analyses. Available experimental results from a four-storeyed building are used to compare the two different sets of assumptions. If the comparison is performed in terms of initial stiffness or plastic deformation capacities, the different partial assumptions of the procedures lead to large discrepancies, while the opposite occurs when the comparison is performed in terms of structural performance levels at target displacements. According to FEMA 356 assumptions, effective yield point rigidities are approximately four times greater than those of EC 8. Both procedures predicted that the structure would behave elastically during low-level excitation and that the structural performance level at target displacement for a high-level excitation would be between the Immediate Occupancy and Life Safety performance levels.     

Shaking‐table tests on reinforced concrete frames with different isolation systems

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.