东准噶尔纸房地区晚石炭世巴塔玛依内山组陆相火山-沉积体系特征

东准噶尔巴塔玛依内山组是典型陆相火山．沉积体系(盆地)，主体由基性及中酸性火山熔岩组成，火山碎屑岩及火山碎屑沉积岩较少，通过对纸房地区晚石炭世巴塔玛依内山组陆相火山岩的岩石化学、地球化学特征进行系统研究，认为它属于造山期后固结初期，新陆壳裂谷向高原火山岩演化的同岩浆源、同沉积盆地、同火山作用的钙碱系列双峰式火山岩．     

辽河盆地冷家油田沙河街组三段储层岩相古地理

辽河盆地在沙河街组三段早期水体较深,主要形成扇三角洲及盆底扇;沙三晚期水体较浅,发育湖泊砂体.依据沉积相分布规律,沙三早、中、晚3个时期可进一步分别划分出湖泊扩张和收缩阶段.盆地西部凹陷的冷家油田为东陡西缓的箕状洼陷.研究区内沙三段的古地理格局是决定相分布的关键因素,河流和湖泊能量相对强弱决定扇体沉积的规模.受相对湖平面变化的影响,纵向扇三角洲主要形成于湖泊扩张时期,并且有相带窄、过渡快、以粗碎屑沉积为主的特点.扇体沉积中主要发育前缘分流河道充填沉积,但位于河口前缘或侧缘的滩坝及前三角洲中的盆底扇局部也较发育.     

胜利油田车镇凹陷沙河街组二、三段沉积相

车镇凹陷古近系沙河街组三段上亚段-二段下亚段是较为典型的深断陷型三级层序.层序的发育主要受控于幕式断陷作用,可进一步划分出低位体系域、湖侵体系域和高位体系域.通过岩心观察、薄片镜下鉴定、粒度分析、古生物及遗迹化石分析,并综合利用测井曲线和地震相特征,认为该时期主要发育有扇三角洲、三角洲、近岸水下扇、湖底扇、滨浅湖滩坝等骨架砂体相,以及滨浅湖、半深湖-深湖等沉积相及其亚相.综合考虑物源特征、沉积环境、沉积体系平面展布以及生、储、盖组合关系,认为有利的沉积相带主要是三角洲、扇三角洲前缘、湖底扇、近岸水下扇的中扇和外扇以及滨浅湖中发育的滩坝和砂坝.     

C1相干算法及其在三维地震资料处理解释中的应用

C1相干算法是计算每道的横测线和相邻纵测线的互相关，依据相干值来判断地层和岩性的横向不均匀性。根据互相关原理，提出了相干体算法中二维和三维C1算法的内容及其具体实现。通过对实际三维地震资料的处理，结合已知地质资料，证明C1相干技术在三维地震资料的断层解释方面有着明显的效果。     

禹州煤田泉店井田构造特征及对其二1煤层的影响

对泉店井田的地质构造进行了分析研究,阐明了断层及褶曲的分布,探讨了井田的构造演化,分析了构造特别是断层对二1煤层的影响,为今后煤矿开发生产提供了可靠的地质依据.     

煤矿采区三维地震资料解释中的切片技术及其应用

长期以来,煤矿采区三维地震勘探资料解释的工作流程与二维地震勘探基本相同,三维地震资料相对二维地震资料所具有的许多解释方面的优越性未能有效发挥出来,人机联作的过程相对简单.在三维地震勘探获取的三维数据体基础上,可做进一步的运算和分析,提取速度、振幅、频率、相位等相关信息,并利用等时切片、层拉平切片、断层切片、面块切片、方差体、相干体等各种技术,有效解释小构造、小褶曲及岩性方面的信息.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Comparative response analysis of conventional and innovative seismic protection strategies

The paper presents a numerical investigation aimed at evaluating the improvements achievable through devices for passive seismic protection of buildings based on the use of shape memory alloys (SMA) in place of conventional steel or rubber devices. To get some generality in the results, different resisting reinforced concrete plane frames were analysed, either protected or not. ‘New’ and ‘existing’ buildings were considered depending on whether seismic provisions are adopted in the building design or not. Base isolation and energy dissipation were equally addressed for both conventional and innovative SMA‐based devices. Fragility analyses were performed using specific damage measures to account for comparisons among different damage types; the results were then used to estimate quantitatively the effectiveness of the various protection systems. More specifically, the assessment involved a direct comparison of the damage reduction provided by each protection system with respect to the severe degradation experienced by the corresponding non‐protected frame. Structural damage, non‐structural damage and damage to contents were used on purpose and included in a subsequent phase of cost analysis to evaluate the expected gains also in terms of economic benefits and life loss prevention. The results indicate that base isolation, when applicable, provides higher degrees of safety than energy dissipation does; moreover, the use of SMA‐based devices generally brings about better performances, also in consideration of the reduced functional and maintenance requirements. Copyright © 2002 John Wiley & Sons, Ltd.     

Seismic response of self‐centring hysteretic SDOF systems

The seismic response of single‐degree‐of‐freedom (SDOF) systems incorporating flag‐shaped hysteretic structural behaviour, with self‐centring capability, is investigated numerically. For a SDOF system with a given initial period and strength level, the flag‐shaped hysteretic behaviour is fully defined by a post‐yielding stiffness parameter and an energy‐dissipation parameter. A comprehensive parametric study was conducted to determine the influence of these parameters on SDOF structural response, in terms of displacement ductility, absolute acceleration and absorbed energy. This parametric study was conducted using an ensemble of 20 historical earthquake records corresponding to ordinary ground motions having a probability of exceedence of 10% in 50 years, in California. The responses of the flag‐shaped hysteretic SDOF systems are compared against the responses of similar bilinear elasto‐plastic hysteretic SDOF systems. In this study the elasto‐plastic hysteretic SDOF systems are assigned parameters representative of steel moment resisting frames (MRFs) with post‐Northridge welded beam‐to‐column connections. In turn, the flag‐shaped hysteretic SDOF systems are representative of steel MRFs with newly proposed post‐tensioned energy‐dissipating connections. Building structures with initial periods ranging from 0.1 to 2.0s and having various strength levels are considered. It is shown that a flag‐shaped hysteretic SDOF system of equal or lesser strength can always be found to match or better the response of an elasto‐plastic hysteretic SDOF system in terms of displacement ductility and without incurring any residual drift from the seismic event. Copyright © 2002 John Wiley & Sons, Ltd.     

A recursive decomposition algorithm for network seismic reliability evaluation

A new probabilistic analytical approach to evaluate seismic system reliability of large lifeline systems is presented in this paper. The algorithm takes the shortest path from the source to the terminal of a node weight or edge weight network as decomposition policy, using the Boolean laws of set operation and probabilistic operation principal, a recursive decomposition process then could be constructed. For a general weight network, the modified Torrieri method (NTR/T method) is introduced to combine with the suggested algorithm. Therefore, the recursive decomposition algorithm may be applied to evaluate the seismic reliability of general lifeline systems. A series of case studies, including a practical district electric power network system and a large urban water supply system, show that the suggested algorithm supplies a useful probabilistic analysis means for the seismic reliability evaluation of large lifeline systems. Copyright © 2002 John Wiley & Sons, Ltd.