An answer to an important controversy and the need for caution when using simple models to predict inelastic earthquake response of buildings with torsion

This paper presents evidence that the extension of conclusions based on the widely used simplified, one story, eccentric systems of the shear‐beam type, to actual, nonsymmetric buildings and consequent assessments of the pertinent code provisions, can be quite erroneous, unless special care is taken to match the basic properties of the simplified models to those of the real buildings. The evidence comes from comparisons of results obtained using three variants of simplified models, with results from the inelastic dynamic response of three‐ and five‐story eccentric buildings computed with detailed MDOF systems, where the members are idealized with the well‐known plastic hinge model. In addition, a convincing answer is provided on a pertinent hanging controversy: For frame‐type buildings, designed in accordance with the dynamic provisions of modern codes (such as EC8 or IBC2000), which allow reduced shears at the stiff edge due to torsion, the frames at the flexible sides are the critical elements in terms of ductility demands. Copyright © 2009 John Wiley & Sons, Ltd.     

Seismic stability analysis of piled embankments: A multiphase approach

The seismic stability analysis of an embankment lying over a soft foundation soil reinforced by a group of vertical piles is performed within the framework of the upper bound kinematic approach of yield design. The analysis is based on a previously developed ‘multiphase’ model of the reinforced ground, which explicitly accounts for the shear and bending resistances of the piles. Making use of appropriate failure mechanisms involving shear zones across which the reinforcements are continuously deforming, along with ‘plastic hinge’ surfaces, upper bound estimates to the critical seismic coefficient of the structure are derived. The results, which are confirmed by the simulations obtained from a finite element elastoplastic code, give clear evidence of the key role played by the bending strength capacities of the piles in ensuring the stability of the pile reinforced embankment. Copyright © 2009 John Wiley & Sons, Ltd.     

Crustal structure of the Ordovician Macquarie Arc,Eastern Lachlan Orogen,based on seismic‐reflection profiling

In the Eastern Lachlan Orogen, the mineralised Molong and Junee‐Narromine Volcanic Belts are two structural belts that once formed part of the Ordovician Macquarie Arc, but are now separated by younger Silurian‐Devonian strata as well as by Ordovician quartz‐rich turbidites. Interpretation of deep seismic reflection and refraction data across and along these belts provides answers to some of the key questions in understanding the evolution of the Eastern Lachlan Orogen—the relationship between coeval Ordovician volcanics and quartz‐rich turbidites, and the relationship between separate belts of Ordovician volcanics and the intervening strata. In particular, the data provide evidence for major thrust juxtaposition of the arc rocks and Ordovician quartz‐rich turbidites, with Wagga Belt rocks thrust eastward over the arc rocks of the Junee‐Narromine Volcanic Belt, and the Adaminaby Group thrust north over arc rocks in the southern part of the Molong Volcanic Belt. The seismic data also provide evidence for regional contraction, especially for crustal‐scale deformation in the western part of the Junee‐Narromine Volcanic Belt. The data further suggest that this belt and the Ordovician quartz‐rich turbidites to the east (Kirribilli Formation) were together thrust over ?Cambrian‐Ordovician rocks of the Jindalee Group and associated rocks along west‐dipping inferred faults that belong to a set that characterises the middle crust of the Eastern Lachlan Orogen. The Macquarie Arc was subsequently rifted apart in the Silurian‐Devonian, with Ordovician volcanics preserved under the younger troughs and shelves (e.g. Hill End Trough). The Molong Volcanic Belt, in particular, was reworked by major down‐to‐the‐east normal faults that were thrust‐reactivated with younger‐on‐older geometries in the late Early ‐ Middle Devonian and again in the Carboniferous.     

Response of seismically isolated structures to rocking‐type excitations

In this paper, the origin of rocking‐type excitations and their effects on the response of base isolated structures are studied. In particular, the role of kinematic interaction in the determination of the rocking excitation is highlighted. The cases of surface foundations subjected to horizontally propagating waves, as well as of embedded foundations under vertically incident shear waves are examined. The validity of the kinematic interaction based on the rigid base mat assumption is discussed. It is shown that, in the case of classical horizontal isolation, rocking input may amplify significantly the response of the lower non‐isolated modes. The examination of full three‐dimensional isolation and active and semi‐active control methods demonstrates the efficacy of these methods to improve the performance of seismically isolated structures subjected to rocking excitations. Copyright © 2009 John Wiley & Sons, Ltd.     

Seismic parameters controlling far-field tsunami amplitudes: A review

We present a review of the influence of various parameters of the sources of major oceanic earthquakes on the amplitude of tsunamis at transoceanic distances. We base our computations on the normal mode formalism, applied to realistic Earth models, but interpret our principal results in the simpler framework of Haskell theory in the case of a water layer over a Poisson half-space. Our results show that source depth and focal geometry play only a limited role in controlling the amplitude of the tsunami; their combined influence reaches at most 1 order of magnitude down to a depth of 150 km into the hard rock. More important are the effects of directivity due to rupture propagation along the fault, which for large earthquakes can result in a ten-fold decrease in tsunami amplitude by destructive interference, and the possibility of enhanced tsunami excitation in material with weaker elastic properties, such as sedimentary layers. Modelling of the so-called tsunami earthquakes suggests that an event for which 10% of the moment release takes place in sediments generates a tsunami 10 times larger than its seismic moment would suggest. We also investigate the properties of non-double couple sources and find that their relative excitation of tsunamis and Rayleigh waves is in general comparable to that of regular seismic sources. In particular, landslides involving weak sediments could result in very large tsunamis. Finally, we emphasize that the final amplitude at a receiving shore can be strongly affected by focusing and defocusing effects, due to variations in bathymetry along the path of the tsunami.     

深层地震资料采集的若干问题

本文着重叙述检波器组合效应、最大炮检距的选择、深反射层的共反射点离散效应等项技术和问题。另外讨论了比较理想的深层资料采集方法。     

云南省潜在震源区综合统计判定之一

本文将云南省地震局多年来积累的关于中强震发生的地质构造、地貌、地球物理场、地形变等特征基础资料,用于Cora-3算法的模式识别,得出云南省潜在震源区的背景指标,结果是比较理想的。“投票”结果表明,80%的学习集D类对象仍被识别为D类,85%的学习集N类对象仍被识别为N类,控制试验的结果也表明识别结果是比较稳定和可靠的。     

Downward migration of seismic activity prior to some great shallow earthquakes in Japanese subduction zones—a possible intermediateterm precursor

Before the 1944 Tonankai earthquake along the Nankai Trough, seismic activity increased in the shallow depths, and then the activity gradually migrated downwards. When it reached its limit (a depth of approximatelty 70 km), the main shock occurred. Several deep earthquakes, including one ofM5.3, occurred several months prior to the Tonankai earthquake. A similar downward migration pattern also can be recognized regarding the 1952 Tokachi-oki earthquake. In this case the deepest earthquakes reached about 400 km. This may be one of the intermediate-term precursory phenomena of great thrusttype earthquakes in subduction zones. Recent observations in the Tokai district along the Suruga Trough, where a large earthquake is expected to occur in the future, suggest a similar downward migration pattern in the land area.     

滇西澜沧变质带中白云母的研究及其地质意义

本文以滇西澜沧变质带中最为广泛分布的造岩矿物—白云母为对象，详细研究和 分析了其成分、多型类型及ba值等，探讨了白云母的发育规律。研究结果表明，本带中绝大多数白云母为多硅白云母，且为3T+2M,型，与蓝闪石共生的则以3T多硅白云母为主。此外，斓沧变质 带经历了蓝闪石片岩亚相的高压变质作用，与古特提斯构造演化密切相突，并可与世界著名的高 压带对比。     

东山峰背斜寒武系地层中硼锂元素的指相意义

东山峰背斜寒武系地层分布区内，Ｂ，Ｌｉ元素的水系沉积物测量平均值分别为１７７．７８×１０－６、２２０．０×１０－６，衬值分别为２．３２、５．０７，Ｒｂ／ｋ比值为０．００６２。这些地球化学特征具典型的指相意义，反映出本区在早寒武世晚期至中、晚寒武世期间为一高盐度、强蒸发的泻湖相沉积环境，可与现代盐湖相环境类比。