多角度倾斜摄影技术在自动纹理映射上的应用

利用多角度倾斜摄影技术获取的倾斜影像成果来更新和构建城市三维实景纹理映射成为数字城市建设中的一个重要应用。本文采用基于DLG和3Dmax生成的建筑物模型,结合SWDC-5的多角度倾斜影像,通过自动选择纹理、自动编辑纹理、自动纹理映射等一系列步骤,自动生成大区域建筑物三维实景数字城市。并通过实验数据对该计算方法的可靠性进行验证,结果表明:该系统的数字化程度远远高于传统方法。     

Provenance of Holocene beach sand in the Western Iberian margin: the use of the Kolmogorov–Smirnov test for the deciphering of sediment recycling in a modern coastal system

Detrital zircons from Holocene beach sand and igneous zircons from the Cretaceous syenite forming Cape Sines (Western Iberian margin) were dated using laser ablation – inductively coupled plasma – mass spectrometry. The U–Pb ages obtained were used for comparison with previous radiometric data from Carboniferous greywacke, Pliocene–Pleistocene sand and Cretaceous syenite forming the sea cliff at Cape Sines and the contiguous coast. New U–Pb dating of igneous morphologically simple and complex zircons from the syenite of the Sines pluton suggests that the history of zircon crystallization was more extensive (ca 87 to 74 Ma), in contrast to the findings of previous geochronology studies (ca 76 to 74 Ma). The U–Pb ages obtained in Holocene sand revealed a wide interval, ranging from the Cretaceous to the Archean, with predominance of Cretaceous (37%), Palaeozoic (35%) and Neoproterozoic (19%) detrital‐zircon ages. The paucity of round to sub‐rounded grains seems to indicate a short transportation history for most of the Cretaceous zircons (ca 95 to 73 Ma) which are more abundant in the beach sand that was sampled south of Cape Sines. Comparative analysis using the Kolmogorov–Smirnov statistical method, analysing sub‐populations separately, suggests that the zircon populations of the Carboniferous and Cretaceous rocks forming the sea cliff were reproduced faithfully in Quaternary sand, indicating sediment recycling. The similarity of the pre‐Cretaceous ages (>ca 280 Ma) of detrital zircons found in Holocene sand, as compared with Carboniferous greywacke and Pliocene–Pleistocene sand, provides support for the hypothesis that detritus was reworked into the beach from older sedimentary rocks exposed along the sea cliff. The largest percentage of Cretaceous zircons (<ca 95 Ma) found in Holocene sand, as compared with Pliocene–Pleistocene sand (secondary recycled source), suggests that the Sines pluton was the one of the primary sources that became progressively more exposed to erosion during Quaternary uplift. This work highlights the application of the Kolmogorov–Smirnov method in comparison of zircon age populations used to identify provenance and sediment recycling in modern and ancient detrital sedimentary sequences.     

塔里木盆地西南凹陷古新统巨厚海相石膏岩沉积特征及环境意义

塔里木盆地(简称塔,下同)西南凹陷古新世阿尔塔什组发育巨厚层海相石膏岩,夹薄层泥岩、粉砂岩及灰岩,是塔西南凹陷断续海侵环境下多期次蒸发沉积的产物。野外调查显示,该层海相石膏岩出现于皮拉里、阿尔塔什、麻扎塔格及大山口地区的阿尔塔什组露头剖面。石膏岩在凹陷内分布广泛,在西昆仑山前、南天山山前及麦盖提斜坡带均有发育且沉积厚度比较稳定。石膏岩中主要盐类矿物为石膏、硬石膏。扫描电镜分析发现,石膏岩中尚含石盐、钙芒硝及含钾镁的硫酸盐等;石膏岩样品中石盐、石膏、硬石膏等多呈细晶或自形微晶,推测阿尔塔什组沉积期,古盐湖曾出现过富钾卤水;通过对皮拉里剖面石膏岩样品进行地球化学分析,揭示该地区古新世古盐湖演化过程中出现2个相对富钾峰值。在古盐湖演化过程中,由于多期次特提斯海水的侵入,凹陷内部阿尔塔时期发育了碎屑岩—巨厚层石膏岩—碎屑岩的沉积韵律,古盐湖卤水表现为淡—咸—淡的变化规律。伴随着阿尔塔时期4次大规模的海侵,石膏岩沉积从西昆仑山前扩展到麦盖提斜坡地带,海侵范围也逐渐扩大。在阿尔塔什组顶部发育中厚层灰岩,显示在阿尔塔什组沉积晚期,塔西南凹陷沉积环境从●湖相逐渐向浅海相环境演变。     

湖南省沉积型锰矿地质环境及成矿作用

湖南省沉积型锰成矿时代跨度大,最早由早元古代板溪群马底驿期至早二叠世孤峰期。其中,早南华纪大塘坡期、中奥陶世烟溪期及中二叠世孤峰期为三个最主要成锰集中期,并且大体呈现出朝东南方向成矿时代变新的趋势。成锰沉积盆地是锰矿床就位的重要场所,相应的岩相古地理环境为锰成矿创造了有利条件,即相对缺氧的、滞流的安静环境。这种环境在诸多古地理环境中都可以形成,导致了锰成矿岩相古地理环境的多样性,如浅海陆棚相、次深海棚缘盆地相、次深海台缘斜坡相及陆表次深海海盆相。三个主要成锰期锰成矿作用具有统一性,成矿作用与地壳拉张、海侵事件、缺氧事件等区域性重大地质事件关联密切。     

广西隆安下石炭统都结微生物岩微相特征与沉积环境研究

广西隆安县都结乡发育的微生物岩产于下石炭统都安组中—上部地层,分布广、厚度大,是中国南方早石炭世报道较少的碳酸盐岩建造类型,具有较高的研究价值。该微生物岩以颗粒灰岩和粘结岩为主,生物含量丰富,包括微生物、有孔虫、棘皮类、钙球、腕足等。通过岩相分析,可识别出以下8种微相类型:MF1含亮晶胶结物的泥晶包壳生屑灰岩、MF2含腕足似球粒灰岩、MF3无纹层似球粒颗粒灰岩、MF4集合颗粒灰岩、MF5细密纹层状粘结岩、MF6内碎屑鲕粒灰岩、MF7鲕粒灰岩、MF8白云质鲕粒灰岩。伴随海平面升降变化,都结微生物岩沉积环境先后经历了FZ1台地边缘浅滩相、FZ2开阔台地相与FZ3局限台地相这三种沉积相带之间往复变化的沉积相模式。结合前人基础地质资料,该沉积相模式表明该微生物岩发育于低纬度孤立碳酸盐岩台地浅水环境,并经历了初期、主体时期和消亡期3个发育阶段,海平面虽伴有小幅波动,但整体呈下降趋势。微生物岩发育于晚古生代冰期与谢尔普霍夫生物灭绝事件前夕,该时期南盘江盆地微生物岩的富集与后生动物礁的缺失相耦合,海洋生态系统中生物组成发生显著变化。在此基础上,本文从微生物岩的角度初步探讨了冈瓦纳大陆冰川作用对北半球低纬度地区的影响。     

Effects of low- to high-angle normal faults on sedimentary architectures in the Eocene Wenchang Formation,Enping Sag,Pearl River Mouth Basin,South China Sea

The effects of low- to high-angle (>30°) normal faults on sedimentary architectural units in the Eocene Wenchang Formation, Enping Sag, Pearl River Mouth Basin (PRMB), South China Sea were investigated utilising a high-quality 3D seismic data set and restored paleogeomorphology. It has been shown that sequence stratigraphic units and sedimentary architecture are significantly controlled by the low- to high-angle normal faults. The Wenchang Formation, a second-order sequence, can be subdivided into two para-second-sequences (the Lower and Upper Wenchang sequences, E₂W^L and E₂W^U) and seven third-order sequences (from base to top: SQ1～SQ7). The low-angle fault confined sequence architecture of the Wenchang Formation is mainly characterised by lateral stacking with the ratio of the vertical subsidence (V) to horizontal slip (H) being reduced from 1/2 for E₂W^L to 1/6 for E₂W^U. In contrast, the high-angle fault confined sequence is characterised by vertical stacking with the ratio of V/H close to 1 for sequences SQ1 to SQ7. In the 3D seismic area, the features of sediment-dispersal pattern were interpreted based on an integrated analysis of paleogeomorphology, seismic reflection characteristics, stratal thickness distribution and multiple attribute clustering. The results show that the large-scale fan delta, belt-shape lacustrine deposit and bird-foot braided delta systems mainly developed in the low-angle fault confined sequences, whereas small-scale fan delta, rhombus-shaped lacustrine deposit and lobe-shaped braided delta systems inherited tectono-sedimentary architectures in the high-angle fault confined sequences.     

纹理特征向量与最大化熵法相结合的SAR影像非监督变化检测

合成孔径雷达(SAR)影像具有明显的斑点噪声,在变化检测中,一般需要考虑空间邻域信息。本文结合SAR影像丰富的纹理信息,提出一种考虑空间邻域信息的高分辨率SAR影像非监督变化检测方法,用基于灰度共生矩阵(GLCM)的32维纹理特征向量构造差异影像。通过最大化熵法自动选取阈值,对精度指标随窗口大小的变化进行回归分析,得到适合于变化检测的窗口为11×11。试验表明,本文方法优于马尔科夫随机场法,可以减小斑点噪声的影响,有效提高高分辨率SAR影像变化检测的精度。     

基于 Lidar 数据和倾斜摄影的城市三维模型构建

针对传统建模方式建模效率低、模型纹理不够丰富真实等缺点,阐述一种以机载Lidar技术来获取地面点高精度的三维坐标、用倾斜摄影测量为三维建模提供纹理的一种新兴的三维建模方式。实验表明,该建模方式不仅工作效率高、真实反应城市空间布局,而且定位精度高、具备可量测分析功能等,同时提供DOM,DEM,点云数据,倾斜影像等数据。     

结合多尺度纹理特征的遥感影像面向对象分类

地物具有多尺度的特点,单一尺度难以准确描述遥感影像包含的地物纹理信息。利用我国自行研发的高分一号遥感影像数据,采用灰度共生矩阵对第一主成分进行纹理特征提取,利用Jeffries-Matusit距离选择多尺度组合,并通过单一纹理结合多光谱数据的分类精度,以及纹理特征间的相关性,最终选择多尺度纹理特征组合进行面向对象分类。研究结果表明:结合多尺度纹理特征组合的面向对象GF-1影像分类能有效提取地物信息,总体分类精度达到81.75%,Kappa系数0.78。     

倾斜摄影测量的城市真三维模型构建方法

针对如何基于近年来新推出的倾斜摄影测量技术快速构建城市真三维模型的问题,在研究分析国内基于该技术构建三维模型方法的基础上,提出了利用Street Factory系统,结合少量人工干预快速构建城市真三维模型的方法。采用倾斜影像联合空中三角测量技术,实现了多角度倾斜影像的一体化区域网平差;通过多视影像密集匹配和自动纹理关联,实现了高精度真实三维模型的构建。基于RCD-30倾斜相机获取的西安大雁塔景区倾斜影像,开展城市真三维模型构建试验。结果表明,所提方法构建的城市真三维模型满足相关规范的要求,适合大规模区域城市三维模型快速构建,对测绘生产单位规模化生产具有一定的参考价值。