长江源各拉丹冬地区三叠纪结扎群沉积特征及层序地层研究

三叠纪结扎群分布于长江源各拉丹冬地区南北两侧，根据基本层序、沉积环境和层序界面特征，结扎群至少可划分出四个三级层序。沉积古地理格局显示出南浅北深的特点。南部靠近羌塘盆地中央隆起带，陆源物质供应丰富。北部雀莫错一带因远离中央隆起，陆源物质供应相对较少，以泥岩、灰岩为主，生物化石丰富，沉积环境以陆棚为主，在相对稳定的沉积水体中以双壳类、菊石类等生物群得以快速发展。     

辽河盆地东部凹陷原油的碳同位素组成特征

通过对辽河盆地东部凹陷原油的饱和烃、芳烃的碳同位素组成特征、原油同位素类型和单体烃同位素特征进行研究 ,发现整个东部凹陷原油及其组分的碳同位素值偏重 ,指示其源岩有机质中藻类和低等水生生物的贡献较少 ;饱和烃—芳烃的碳同位素值关系揭示东部凹陷大部分原油样品与沙河街组沙三段烃源岩的特征相近 ,而南部和北部地区少数样品表现出负的碳同位素异常 ,与该区中生界源岩样品的接近 ,推测原油中可能混入了中生界来源的油气。南部地区各样品的碳同位素类型曲线和单体烃的碳同位素曲线均相似 ,揭示了两者具相同的油气来源。北部地区各原油样品的单体烃的碳同位素类型曲线间具有相似的分布特征 ,但茨榆坨地区的原油样品的碳同位素值比牛居地区的系统偏轻 ,可能是成熟度相对较低引起的 ,表明茨榆坨地区原油具有早期成藏的特征。原油的碳同位素组成特征是研究油气来源和成藏特征分析的一种重要手段。     

塔里木板块南缘早古生代沉积特征及构造背景探讨

塔里木板块南缘早古生代时期继承了震旦纪的古地理格局，处于浅海陆棚—半深海环境，沉积了一套海相碳酸盐岩和碎屑岩地层。根据区域地层划分、古生物化石和最新的同位素测年数据，确定了塔里林板块南缘地层时代为早古生代。通过沉积学和地球化学方法初步分析，确定了该地区为早古生代的大地构造背景—具有被动大陆边缘性质。因此，系统研究塔里木板块南缘早古生代沉积地层，对于重塑早生代以来该区板块构造格局及演化历史有重要地质意义。     

浙江桐庐晚奥陶世晚期沉积层序和沉积环境分析

文昌组上段顶部是一套潮汐层理非常发育的泥质砂岩或砂质泥岩,存在双向交错层理,层面有雨痕,应为潮坪沉积。潮坪沉积由小型层序构成,小型层序又是由砂、泥质单层组成。砂质单层底部通常为岩性突变面或侵蚀面,砂质纹层较厚,其中可见对称波痕或泥砾;向上砂质纹层变薄,过渡到泥质单层。砂质单层形成于暴风浪时期,泥质单层是风浪衰减后恢复正常的潮汐沉积。因此,小型层序从成因上说是一风暴层序。碎屑成份、砾石成份分析表明沉积物均来自华夏古陆的沉积岩和变质岩基底。物源一致,岩层产状变化不大,反映文昌组沉积环境稳定。岩性、粒度分析表明文昌组是一向上变细、由浅海高能环境向近岸低能环境过渡的沉积层序。文昌组下段为浅海砂岩沉积,上段顶部为潮坪沉积。二者之间是一套夹砾岩透镜体的泥质粉细砂岩,其沉积环境应介于浅海和滨岸之间,为水下岸坡沉积。砾岩层只是大的沉积旋回中出现的事件性水下冲积物。     

冀北地区金矿床He、Ar、Pb同位素组成及其成矿物质来源

成矿物质来源一直是成矿理论研究和找矿实践的焦点问题。选择了冀北地区3个幔枝构造金矿集中区11个金矿床黄铁矿及部分围岩进行了He、Ar同位素测定。研究表明,冀北地区主要金矿的3He/4He的值域为(0.93～7.30)×10-6,平均3.55×10-6;R/Ra=0.66～4.93,平均2.53;40Ar/36Ar=426～2073,40Ar平均为8.20×10-7cm3/g,4He/40Ar平均为2.17。矿区外围片麻岩和花岗岩的3He/4He值仅为(0.001～0.55)×10-6,反映来源上有明显差别。3He和4He在He同位素浓度图上落于地幔区附近。64个Pb同位素数据表现为矿质以幔源为主,确有部分壳源物质加入。研究认为,本区成矿物质应源于地球深部,随地幔柱多级演化,深部成矿流体由地球深部迁移到浅部,期间不可避免地存在壳幔流体的混合作用,故其值域往往界于地幔和地壳之间。     

Sea-level changes and hydrothermal sedimentary mineralization of large-superlarge ore deposits among Sinian to Triassic in South China

Among the Sinian to Triassic strata in South China, the stratiform, quasi-stratiform and lenticular metallic deposits in association with hydrothermal sedimentation mainly occur in the four periods: (1) the Sinian Datangpo interglacial period, (2) the early period of Early Cambrian, (3) the late period of Middle Devonian to early period of Late Devonian,and (4) the late period of Early Permian. The four mineralization periods all happened around the maximum flooding period in the third-order seal-level cycle during the ascending stage in the first-order sea-level cycle. The deep seawater layer, starved and non-compensatory basin, low sedimentary rate, and low energy and anoxic environment during the maximum flooding period are very suitable for the formation and preservation of large to superlarge hydrothermal sedimentary deposits. The maximum flooding period also coincided with the intensified regional tectonism, extensive deep magmatism and hydrothermal sedimentation, which provide, for the formation of large to superlarge hydrothermal sedimentary deposits through the rapid accumulation of hydrothermal sediments, the needed dynamics, ore-forming materials and favorable passway for hydrothermal fluids to enter the basin.     

时频测控技术的发展

目前，在所有的物理量中时间与频率标准的物理实现具有最高的准确度和稳定度，它们的发展不但在计量技术中，而且在几乎整个高科技领域中起着十分重要的作用。这方面的发展一直受到发达国家的高度重视。根据近年来与国外同行的技术交流和了解的情况，对时频测控技术的发展和影响等作了介绍。     

A Linear Programming Approach to Determine the Normative Composition of Sedimentary Rocks

The analysis of modal and normative composition of sedimentary rocks is widely used for studying their sources and tectonic settings. The normative calculation of the mineral composition of rocks in this study is formulated as a linear programming problem and is solved by means of the simplex method. This enables both simultaneous and successive subtraction of a set of basic minerals from a rock sample represented by its chemical composition {SiO₂...LOI}. Such an approach provides a more exact calculation of the contribution of basic minerals in the rock. This mathematical approach is used to study two representative sets of sandstones and fine-grained rocks from a Meso- to Neoproterozoic marginal basin of southeastern Siberia (Uchur–Maya region, Yakutia) and a Pennsylvanian-Lower Permian uplifted continental block in Colorado, USA. The calculated normative mineral compositions of the Siberian sandstones are consistent with the observed modal compositions. These sandstones vary from K- Feldspar rich arkoses at the base of the sequence (the Uchur Group, lower Riphean) to quartz arenites or lithic sandstones and wacke in transgressive successions of the middle-upper Riphean. Arkoses and quartz arenites are dominant in Meso- to Neoproterozoic Siberia. These samples represent craton interior uplifted basement and quartzose, recycled orogen provenance of a stable craton in Rodinia. There are higher but consistent discrepancies between the calculated and observed compositions for the Pennsylvanian to Lower-Permian arkoses and quartz arenites (Sangre de Cristo, Belden, and Maroon Formations). The differences between the predicted and observed mineralogy may be due to uncertainties in the modes in the matrix and cement of the sandstones. This normative program should supplement modal calculations and provide better genetic constructions, especially in case of matrix-rich sandstones.     

Compositional Geometry and Mass Conservation

A geometrical structure is imposed on compositional data by physical and chemical laws, principally mass conservation. Therefore, statistical or mathematical investigation of possible relations between data values and such laws must be consistent with this structure. This demands that geometrical concepts, such as points that specify both mass and composition in linear space, and lines in projective space that specify composition only, be clearly defined and consistent with mass conservation. Mass thus becomes the norm in composition space in place of the Euclidean norm of ordinary space. Coordinate transformations inconsistent with this geometry are accordingly unnatural and misleading. They are also unnecessary because correlation arising from the constant mass presents no unusual difficulty in the analysis of the underlying quadratic form.     

Tectonic controls on metamorphism, partial melting, and intrusion: timing and duration of regional metamorphism and magmatism in the Ni de Massif, Turkey

Mafic high-pressure granulite, eclogite and pyroxenite xenoliths have been collected from a Mesozoic volcaniclastic diatreme in Xinyang, near south margin of the Sino-Korean Craton (SKC). The high-pressure granulite xenoliths are mainly composed of fine-grained granoblasts of Grt+Cpx+Pl+Hbl±Kfs±Q±Ilm with relict porphyritic mineral assemblage of Grt+Cpx±Pl±Rt. P–T estimation indicates that the granoblastic assemblage crystallized at 765–890 °C and 1.25–1.59 GPa, corresponding to crustal depths of ca. 41–52 km with a geotherm of 75–80 mW/m². Calculated seismic velocities (V_p) of high-pressure granulites range from 7.04 to 7.56 km/s and densities (D) from 3.05 to 3.30 g/cm³. These high-pressure granulite xenoliths have different petrographic and geochemical features from the Archean mafic granulites. Elevated geotherm and petrographic evidence imply that the lithosphere of this craton was thermally disturbed in the Mesozoic prior to eruption of the host diatreme. These samples have sub-alkaline basaltic compositions, equivalent to olivine– and quartz–tholeiite. REE patterns are flat to variably LREE-enriched (La_N/Yb_N=0.98–9.47) without Eu anomaly (Eu/Eu*=0.95–1.11). They possess 48–127 ppm Ni and 2–20 ppm Nb with Nb/U and La/Nb ratios of 13–54 and 0.93–4.75, respectively, suggesting that these high-pressure granulites may be products of mantle-derived magma underplated and contaminated at the base of the lower crust. This study also implies that up to 10 km Mesozoic lowermost crust was delaminated prior to eruption of the Cenozoic basalts on the craton.