重力取样器取样技术研究

在湖泊环境研究中，淤泥质沉积物取样是一项很重要的工作，样品的取心率和原状性直接影响了环境研究的结果。重力取样器是获取湖泊、水库等水域浅层湖泊沉积物的一种经济有效、操作简单的常用工具。因此研究重力取样器的取样技术对环境研究具有积极的意义。研究了重力取样器的取样技术，并在此基础上成功设计了一种便携式的重力式取样器，非常适合环境研究机构的沉积物取样工作。     

Microwave-assisted extraction of organochlorine pesticides from sediments and determination by gas chromatograph with electron capture detection

A simple and rapid procedure to extract organochlorine pesticides （OCPs） from sediments by means of microwave energy is proposed. Sediment samples were irradiated with microwaves in a closed vessel system while immersed in hexane-acetone （1 ： 1, v/v）. The sample extracts were cleaned up using solid phase extraction with Florisil as adsorbent. Pesticides were eluted with hexane-ethyl acetate （80 ： 20, v/v） and determined by gas chromatographic separation with electron capture detection. Three oven programs were assayed with two different solvent mixtures in order to achieve adequate experimental conditions for the complete extraction of organochlorine pesticides from the matrix. Different variables such as the composition of extraction solvent,     

Speciation analysis and significance of ecological geochemistry

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.     

Changes to cadmium associations in canal sediments on drying and oxidation

The mainly 19th Century canal system in the UK, largely managed by British Waterways, has been increasingly brought back into operation over the last few decades, and is now widely used for both leisure, and, increasingly, transport. Both initial and routine dredging of the canal sediment is carried out and these sediments are generally disposed of to land. Because many of the canals were connected with primary industries, their sediments can locally be significantly contaminated with heavy metals, and the behaviour of these metals under differing redox conditions, when introduced into a new environment （i.e., on land） is of importance for environmental risk-assessment purposes. Canal sediments are often rich in sulfidic mineral phases, and we have attempted to quantify the influence of these sulfidic phases on the release and retention of metals in dredged canal sediments, using a combination of traditional chemical techniques （e.g. sequential extraction） and X-ray absorption spectroscopy （XAS）. Sediment samples have been collected from urban fresh-water canals, one in the British Midlands and one in Northern France. It appears from XAS that Cd is largely associated with oxygen in air-dried sediment, and with sulphur in vacuum-dried sediment.     

Influence of humic acid on bioavailability of heavy metals in sediments

The mimetic ocean environment and chemical method were used to research the bioavailability effect of humic acid on five heavy metals in sediment, including Cd, Cu, Zn, Pb and Ni. The sediment was separated into four containers with artificial seawater, and each of them had different concentrations of humic acid. The values of concentrations covered the whole range found in natural sediment （0.1%-10%）. According to the 48 hours LC50 of clam and distribution coefficient, metals were added in artificial seawater, and their speciation was determined at first and then after two days＇ incubation. It was found the bioavailability of heavy metals was reduced in the presence of humic acid. The obvious negative effect on Zn was observed, but the influence on Cd was not remarkable. In addition, the contents of Pb and Ni increased obviously in organic phase, and they are correlative with the concentrations of humic acid.     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

科尔沁沙地土地利用与耕作方式对土壤风蚀的影响

土壤风蚀造成的直接生态后果是土地资源的退化。在春播前两次沙尘暴事件中,对科尔沁沙地几种具有代表性的土地类型的土壤风蚀量及土壤特性进行了野外测定、分析,结果表明:(1)在同一沙尘暴天气下,由于土地利用和耕作方式的不同,土壤风蚀量存在着差异,新垦农地和翻耕农地的风蚀量显著高于未垦草地、免耕农地和麻黄地;免耕农地则与未垦草地的风蚀量相差不大,风蚀危害较轻;麻黄地几乎不受风蚀侵害。新垦农地、翻耕农地、免耕农地、未垦草地、麻黄地两次观测的土壤风蚀量平均值依次为24.59、15.60、2.26、1.46和0.22 g/h.cm2。(2)基于土壤特性计算的土壤退化指数结果表明,新垦农地和翻耕农地发生了较为严重的退化。     

Short-term beach–dune sand budgets on the north sea coast of France: Sand supply from shoreface to dunes, and the role of wind and fetch

Three experimental plots, covering the transition from the upper beach to the dune, on the North Sea coast of France were monitored at various intervals over a period of 18–24 months via high resolution terrain surveys in order to determine inter-site sand budget variability, as well as patterns and processes involved in sand exchanges between the upper beach and dune. The wind regime consists of a fairly balanced mix of moderate (80% of winds are below 8 m/s) onshore, offshore and shore-parallel winds. Sustained dune accretion over several years depends on the periodic local onshore welding of shoreface tidal banks that have developed in the storm- and tide-dominated setting of the southern North Sea. The only site where this has occurred in the recent past is Calais, where bank welding has created a wide accreting upper beach sand flat. At this site, significant sand supply from the subtidal sand bank reservoir to the upper beach flat occurred only once over the 18-month survey following a major storm. The bulk of the sand deposited over this large flat is not directly integrated into the adjacent embryo dunes by onshore winds but is progressively reworked in situ into developing dunes or transported alongshore by the balanced wind regime, thus resulting in alongshore stretching of the embryo dune system. The Leffrinckoucke site near Belgium shows moderate beach–dune mobility and accretion, while the Wissant site exhibits significant upper beach bedform mobility controlled by strong longshore currents that result in large beach budget fluctuations with little net budget change, to the detriment of the adjacent dunes. Accretion at these two sites, which are representative of the rest of the North Sea coast of France, is presently constrained by the absence of a shore-attached sand bank supply reservoir, while upper beach–dune sand exchanges are further limited by the narrow wave-affected upper beach, the intertidal morphology of bars and troughs which segments the aeolian fetch, and the moderate wind energy conditions. The balanced wind regime limits net sand mobilisation in favour of either the beach or the dune, and may explain the relatively narrow longshore morphology of the dune ridges bounding this coast.     

Lake-Level Fluctuations and Small-Scale Vegetation Patterns During the Late Glacial in The Netherlands

Late glacial changes in the vegetation were studied in and around a former lake on the southeastern side of a coversand ridge near Milheeze (southern Netherlands). Analyses of microfossils and macroremains and AMS ¹⁴C dating were performed on four sediment cores along a transect from sand ridge to the lake centre. Small-scale vegetation patterns and lake-level fluctuations were reconstructed in detail based on the information provided by the transect. For the first time in The Netherlands, cores along a transect within one lake were used to reconstruct the amplitude of late glacial lake-level fluctuations. Near Milheeze, a small and shallow lake was formed during the Bølling. The large increase in the water level during the Bølling and early Allerød, and the transition to more eutrophic conditions at the start of the Allerød, were probably related to the disappearance of permafrost. During the Allerød, open birch and pine woodlands developed in the area. In the lake, organic deposits accumulated, and the lake size and depth fluctuated. At the start of the Younger Dryas, higher lake water levels were recorded and woodlands became more open as a result of both a drop in the temperature and an increase in the effective precipitation. During the late Younger Dryas the lake water level dropped as the climate became drier and temperatures slightly increased. Accumulation of organic deposits in the lake ceased at the end of the Younger Dryas, which was caused by a drop in the water level in combination with the hydroseral succession process within the lake itself. The climatic signal reflected in the late glacial flora and lake-level fluctuations agree well with other published data from The Netherlands.