An experimental study of grain scale melt segregation mechanisms in two common crustal rock types

Creation of pathways for melt to migrate from its source is the necessary first step for transport of magma to the upper crust. To test the role of different dehydration‐melting reactions in the development of permeability during partial melting and deformation in the crust, we experimentally deformed two common crustal rock types. A muscovite‐biotite metapelite and a biotite gneiss were deformed at conditions below, at and above their fluid‐absent solidus. For the metapelite, temperatures ranged between 650 and 800 °C at P_c=700 MPa to investigate the muscovite‐dehydration melting reaction. For the biotite gneiss, temperatures ranged between 850 and 950 °C at P_c=1000 MPa to explore biotite dehydration‐melting under lower crustal conditions. Deformation for both sets of experiments was performed at the same strain rate (ε.) 1.37×10^?5 s^?1. In the presence of deformation, the positive ΔV and associated high dilational strain of the muscovite dehydration‐melting reaction produces an increase in melt pore pressure with partial melting of the metapelite. In contrast, the biotite dehydration‐melting reaction is not associated with a large dilational strain and during deformation and partial melting of the biotite gneiss melt pore pressure builds more gradually. Due to the different rates in pore pressure increase, melt‐enhanced deformation microstructures reflect the different dehydration melting reactions themselves. Permeability development in the two rocks differs because grain boundaries control melt distribution to a greater extent in the gneiss. Muscovite‐dehydration melting may develop melt pathways at low melt fractions due to a larger volume of melt, in comparison with biotite‐dehydration melting, generated at the solidus. This may be a viable physical mechanism in which rapid melt segregation from a metapelitic source rock can occur. Alternatively, the results from the gneiss experiments suggest continual draining of biotite‐derived magma from the lower crust with melt migration paths controlled by structural anisotropies in the protolith.     

Ground deformation of the southern sector of the Aeolian islands volcanic arc from geodetic data

The deformation pattern and the dynamics of the southern sector of the Aeolian archipelago are investigated. A study on the ground deformation, measured over the last 20 years in the trilateration geodetic network between the islands of Vulcano and Lipari, has been conducted. Analysis of the relative displacements and the uniform strain tensor parameters, as well as the comparison between areal dilatation and the vertical variations deduced by precise levelling, allow distinguishing different phases associated both with the regional dynamics and the local volcanic context of the area. These phases, however, appear to be closely interrelated. The analysis of the deformation pattern allows to constrain the predominance of a roughly E–W trending extension and a N–S contraction at a regional scale. This regime is consistent with right-lateral movements along a NW–SE striking fault system.     

Paleoliquefaction study of the Clarendon–Linden fault system, western New York State

The lack of earthquake-induced liquefaction features in Late Wisconsin and Holocene sediments in Genesee, Wyoming, and Allegany Counties suggests that the Clarendon–Linden fault system (CLF) did not generate large, moment magnitude, M≥6 earthquakes during the past 12,000 years. Given that it was the likely source of the 1929 M 4.9 Attica earthquake, however, the Clarenden–Linden fault system probably is capable of producing future M5 events. During this study, we reviewed newspaper accounts of the 1929 Attica earthquake, searched for earthquake-induced liquefaction features in sand and gravel pits and along tens of kilometers of river cutbanks, evaluated numerous soft-sediment deformation structures, compiled geotechnical data and performed liquefaction potential analysis of saturated sandy sediments. We found that the 1929 M 4.9 Attica earthquake probably did not induce liquefaction in its epicentral area and may have been generated by the western branch of the Clarendon–Linden fault system. Most soft-sediment deformation structures found during reconnaissance did not resemble earthquake-induced liquefaction features, and even the few that did could be attributed to non-seismic processes. Our analysis suggests that the magnitude threshold for liquefaction is between M 5.2 and 6, that a large (M≥6) earthquake would liquefy sediments at many sites in the area, and that a moderate earthquake (M 5–5.9) would liquefy sediments at some sites but perhaps not at enough sites to have been found during reconnaissance. We conclude that the Clarendon–Linden fault system could have produced small and moderate earthquakes, but probably not large events, during the Late Wisconsin and Holocene.     

Static deformation of two welded monoclinic elastic half-spaces due to a long inclined strike-slip fault

Static deformation of two monoclinic elastic half-spaces in welded contact due to a long inclined strike-slip fault situated in one of the half-spaces is studied analytically and numerically. Closed-form algebraic expressions for the displacement at any point of the medium are obtained. The variation of the displacement at the interface with the horizontal distance from the fault is studied. The effect of anisotropy on the displacement field is examined. It is found that while the anisotropy of the source half-space has a significant effect on the displacement at the interface, the anisotropy of the other half-space has only a marginal effect.     

新疆伽师及邻近地区现今地壳形变的GPS监测与研究

利用高精度数据软件对伽师及邻近地区的GPS监测网观测数据进行计算分析(基线精度达到了 10 - 8～ 10 - 9) ,获得了该地区的现今地壳形变速率图 .结果表明 ,伽师及邻近地区在印度板块的推挤作用下 ,地壳正快速缩短变形 ,主压应力为近南北方向 .各地块运动速率不同 ,平均应变率为 0 .0 4× 10 - 6 /a .     

川滇菱形块体边界的现今地壳形变

依据川滇菱形块体边界带上所有跨断层测量资料，分析了各场地所处断裂的近期形变特征，结果表明；川滇菱形块体北段形变活动逐渐减弱，南段逐渐加强，各条断裂分别显示出不同的变形特征；菱形块体的现今水平形变以左旋走滑运动为主，垂直形变速度较低，且呈上盘抬升与下降交替出现的运动特征，部分场地的形变异常变化与其邻近的地震活动密切相关。     

The newest observational evidence on asymmetrical deformation of the Earth

IntroductionWhat is the shape of the Earth? Does it change continuously? It is a scientific question since the ancient times and is still being observed and explored at present. In 250 BC, Greek scholar Eratosthene supposed the shape of the Earth to be spherical according to the observations to the Sun and estimated the perimeter of the Earth to be 4 000 km (King-Hele, 1976) according to the camel-walking distance. Until the 16th century, the Earth was considered to be a very symmetrical …     

有限弹性变形地壳中的地震波

地壳由半无限大的基岩上一层厚度为H^-的表土层组成，入射地震波为垂直的SH波，产生水平地面运动。当浅源大地震发生时，在极震区以外行波传播产生地面运动将使地壳介质有非线性的有限弹性变形。用小参数摄动法使非线性控制方程为线性化的小参数各阶控制方程，得出头两阶线性控制方程的解析解。     

Where did rotational shortening occur in the Himalayas? - Inferences from palaeomagnetic remagnetisations

In metacarbonates of the Lesser (LH) and Tethyan (TH) Himalayas of Kumaon/Garhwal (N-India) characteristic remanent magnetisations carried by pyrrhotite (unblocking temperatures: 250-330°C) and magnetite (demagnetising spectra: 15-50 mT) have been identified. Negative fold tests indicate remanence acquisition after the main folding phase, which is of short-wavelength character and occurs during the early orogenese of the Himalayas. A thermal or thermochemical origin of magnetisation is likely and the age of remanence acquisition is indicated to be about 40 Ma by ⁴⁰K/³⁹Ar cooling and ⁴⁰Ar/³⁹Ar crystallisation ages. In the Kumaon LH a long-wavelength tilting is indicated by a distribution of the remanence directions along a small-circle in N-S direction. Steepening of the remanence directions in the TH related to ramping on the Main Central Thrust (MCT) was not observed, in contrast to other related studies. In the Alaknanda valley of LH a 38±8 Ma age of remanence acquisition is supported by comparison of observed inclinations to the apparent polar wander path of India. Clockwise rotation of 20.3±11.7° (LH/Alaknanda valley) and 11.3±8.5° (TH) with respect to the Indian plate is observed, indicating that there is no significant evidence for rotational shortening along the MCT since about 40 Ma. Our results suggest that most of rotational underthrusting and oroclinal bending has not been accommodated by the MCT, but by the main thrusts south of it. The latest Miocene/Pliocene age of the Main Boundary Thrust indicates that oroclinal bending is a late-orogenic process.     

A model of equilibrium bed topography for meander bends with erodible banks

Channel curvature produces secondary currents and a transverse sloping channel bed, along which the depth increases towards the outer bank. As a result deep pools tend to form adjacent to the outer bank, promoting bank collapse. The interaction of sediment grains with the primary and secondary flow and the transverse sloping bed also causes meanders to move different grain sizes in different proportions and directions, resulting in a consistent sorting pattern. Several models have been developed to describe this process, but they all have the potential to over‐predict pool depth because they cannot account for the influence of erodible banks. In reality, bank collapse might lead to the development of a wider, shallower cross‐section and any resulting flow depth discrepancy can bias associated predictions of flow, sediment transport, and grain‐size sorting. While bed topography, sediment transport and grain sorting in bends will partly be controlled by the sedimentary characteristics of the bank materials, the magnitude of this effect has not previously been explored. This paper reports the development of a model of flow, sediment transport, grain‐size sorting, and bed topography for river bends with erodible banks. The model is tested via intercomparison of predicted and observed bed topography in one low‐energy (5·3 W m^?2 specific stream power) and one high‐energy (43·4 W m^?2) study reach, namely the River South Esk in Scotland and Goodwin Creek in Mississippi, respectively. Model predictions of bed topography are found to be satisfactory, at least close to the apices of bends. Finally, the model is used in sensitivity analyses that provide insight into the influence of bank erodibility on equilibrium meander morphology and associated patterns of grain‐size sorting. The sensitivity of meander response to bank cohesion is found to increase as a function of the available stream power within the two study bends. Copyright © 2002 John Wiley & Sons, Ltd.