Stratigraphic evolution of the nearshore to fluvial plain of the Upper Cuyo Group,Neuquén,Argentina

The upper portion of the Cuyo Group in the Zapala region, south‐eastern Neuquén Basin (Western Argentina), encompasses marine and transitional deposits (Lajas Formation) overlain by alluvial rocks (Challacó Formation). The Challacó Formation is covered by the Mendoza Group above a second‐order sequence boundary. The present study presents the stratigraphic framework and palaeophysiographic evolution of this Bajocian to Eo‐Calovian interval. The studied succession comprises the following genetic facies associations: (i) offshore and lower shoreface–offshore transition; (ii) lower shoreface; (iii) upper shoreface; iv) intertidal–subtidal; (v) supratidal–intertidal; (vi) braided fluvial to delta plain; (vii) meandering river; and (viii) braided river. The stratigraphic framework embraces four third‐order depositional sequences (C1 to C4) whose boundaries are characterized by the abrupt superposition of proximal over distal facies associations. Sequences C1 to C3 comprise mostly littoral deposits and display well‐defined, small‐scale transgressive–regressive cycles associated with fourth‐order depositional sequences. Such high‐frequency cycles are usually bounded by ravinement surfaces associated with transgressive lags. At last, the depositional sequence C4 delineates an important tectonic reorganization probably associated with an uplift of the Huincul Ridge. This is suggested by an inversion of the transport trend, north‐westward during the deposition of C1 to C3 depositional sequences (Lajas Formation) to a south‐west trend during the deposition of the braided fluvial strata related to the C4 depositional sequence (Challacó Formation).     

Deep‐water dunes on drowned isolated carbonate terraces (Mozambique Channel,south‐west Indian Ocean)

Subaqueous sand dunes are common bedforms on continental shelves dominated by tidal and geostrophic currents. However, much less is known about sand dunes in deep‐marine settings that are affected by strong bottom currents. In this study, dune fields were identified on drowned isolated carbonate platforms in the Mozambique Channel (south‐west Indian Ocean). The acquired data include multibeam bathymetry, multi‐channel high‐resolution seismic reflection data, sea floor imagery, a sediment sample and current measurements from a moored current meter and hull‐mounted acoustic Doppler current profiler. The dunes are located at water depths ranging from 200 to 600 m on the slope terraces of a modern atoll (Bassas da India Atoll) and within small depressions formed during tectonic deformation of drowned carbonate platforms (Sakalaves Seamount and Jaguar Bank). Dunes are composed of bioclastic medium size sand, and are large to very large, with wavelengths of 40 to 350 m and heights of 0·9 to 9·0 m. Dune migration seems to be unidirectional in each dune field, suggesting a continuous import and export of bioclastic sand, with little sand being recycled. Oceanic currents are very intense in the Mozambique Channel and may be able to erode submerged carbonates, generating carbonate sand at great depths. A mooring located at 463 m water depth on the Hall Bank (30 km west of the Jaguar Bank) showed vigorous bottom currents, with mean speeds of 14 cm sec^?1 and maximum speeds of 57 cm sec^?1, compatible with sand dune formation. The intensity of currents is highly variable and is related to tidal processes (high‐frequency variability) and to anticyclonic eddies near the seamounts (low‐frequency variability). This study contributes to a better understanding of the formation of dunes in deep‐marine settings and provides valuable information about carbonate preservation after drowning, and the impact of bottom currents on sediment distribution and sea floor morphology.     

Topographical controls on small‐volume pyroclastic flows

Emplacement of small‐volume (<0·1 km³) pyroclastic flows is significantly influenced by topography. The Arico ignimbrite on Tenerife (Canary Islands) is a characteristic small‐volume pyroclastic flow deposit emplaced on high relief topography. The pyroclastic flow flowed down pre‐existing valleys on the southern slopes of the island. In proximal areas deep (up to 100 m) valleys acted as efficient conduits for the pyroclastic flow, which was mostly channelled; in this particular area the ignimbrite corresponds to a homogeneous, moderately welded deposit, consisting of flattened pumices in an abundant ashy matrix with a relatively low lithic fragment content. In intermediate zones significant changes occur in the steepness of the slope and, although still channelled, here the pyroclastic flow was influenced by hydraulic jumps. In this area, two different units can be clearly distinguished in the ignimbrite: the lower unit is composed of a lithic‐rich ground‐layer deposit that formed at the turbulent, highly concentrated head of the flow; the upper unit consists of a well welded pumice‐rich deposit that occasionally reveals a basal layer formed by shearing with the lower part. This division into two units is maintained as far as distal areas near the present‐day coastline, where the slope is very gentle or null and the ignimbrite is not channelled. The ground layer is not found in distal areas. The ignimbrite here only consists of the upper unit, which is occasionally repeated due to a surging process provoked by the lower flow speed, as the pyroclastic flow spread out of the channelled zone. A theoretical model on how topography controlled the deposition of the Arico ignimbrite is derived by interpreting the observed lithological and sedimentological variations in terms of changes in topography and bedrock morphology. This new model is of general applicability and will help to explain other deposits of similar characteristics.     

Ore Genesis and Tectonic Significance of the Xiaojiashan Tungsten Deposit,Eastern Tianshan,Xinjiang, China: Evidence from Geology,Fluid Inclusions,and Stable Isotope Geochemistry

The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D₂d ₁²). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of T_h, and white quartz veins have 154–312°C of T_h. The laser‐Raman test shows that CO₂ is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO₂, H₂O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl^?, Na⁺. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H₂O–CO₂, low salinity, and H₂O–CO₂–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.     

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.     

In Situ U‐Th‐Pb Dating and Sr‐Nd Isotope Analysis of Bastnäsite by LA‐(MC)‐ICP‐MS

Bastnäsite is the end member of a large group of carbonate–fluoride minerals with the common formula (REE) CO₃F·CaCO₃. This group is generally widespread and, despite never occurring in large quantities, represents the major economic light rare earth element (LREE) mineral in deposits related to carbonatite and alkaline intrusions. Since bastnäsite is easily altered and commonly contains inclusions of earlier‐crystallised minerals, in situ analysis is considered the most suitable method to measure its U‐Th‐Pb and Sr‐Nd isotopic compositions. Electron probe microanalysis and laser ablation (multi‐collector) inductively coupled plasma‐mass spectrometry of forty‐six bastnäsite samples from LREE deposits in China, Pakistan, Sweden, Mongolia, USA, Malawi and Madagascar indicate that this mineral typically has high Th and LREE and moderate U and Sr contents. Analysis of an in‐house bastnäsite reference material (K‐9) demonstrated that precise and accurate U‐Th‐Pb ages could be obtained after common Pb correction. Moreover, the Th‐Pb age with its high precision is preferable to the U‐Pb age because most bastnäsites have relatively high Th rather than U contents. These results will have significant implications for understanding the genesis of endogenous ore deposits and formation processes related to metallogenic geochronology research.     

Comment on: Mass Fractions of Forty‐Six Major and Trace Elements,Including Rare Earth Elements,in Sediment and Soil Reference Materials Used in Environmental Studies. Fiket et al. (2017), Geostandards and Geoanalytical Research, 41, 123–135

This paper is intended to be a constructive discussion of Fiket et al. (2017, Geostandards and Geoanalytical Research , 41 , 123–135), who dealt with the determination of major, trace and rare earth elements in several sediment and soil certified reference materials. In the present author's view, the paper by Fiket et al. (2017) suffers from a lack of reference to several publications in which somewhat similar results had already been reported. The present contribution therefore provides a comparison of previously published results with those of Fiket et al. for the CRMs soil NCS DC 77302 (GBW 07410), stream sediment NCS DC 73309 (GBW 07311), marine sediments MESS‐3 and NCS DC 75301 (GBW 07314) and estuarine sediment IAEA‐405. It is argued that this fuller consideration (a) allows critical evaluation of the quality of the results presented by Fiket et al. and (b) highlights the advantages of their work. Finally, attention is drawn to the (possible or real) problems that can arise during simultaneous determination of multiple trace elements.     

Growth rate is temperature‐dependent,but the proportion of resource allocation between the growth and gonads is not,in early adult stage of the lancelet branchiostoma japonicum

The pattern of resource allocation into multiple life‐history traits can vary with the environment; for example, high temperatures generally facilitate growth. Changes in investment in growth due to temperature may alter the allocation to other traits that are in trade‐off with that. Here, we investigated the trade‐off between growth and reproduction and whether the proportion of allocation to these varies with increasing seawater temperature in the lancelet Branchiostoma japonicum. We reared the lancelets of early adult stage under three different temperature treatments (control, + 1°C and + 2°C treatments) for 427 days in the laboratory. Although the total body length at initiation did not differ between treatments, the length was influenced by the interaction between elapsed days and temperature treatments, suggesting that growth rate was temperature‐dependent; the lancelets under higher temperature conditions showed a more rapid growth rate than did those under the control conditions. The frequency of individuals with gonads did not differ between treatments throughout their reproductive season. The monthly growth increments were also not significantly affected by the interaction between the presence/absence of gonads and temperature treatments, although the presence of gonads caused the growth increments to decrease. In addition, the effect of temperature treatments was significant. These results suggest that changes in temperature did not alter the pattern of allocation between growth and reproduction that were in a trade‐off, whereas high temperature would solely result in an increase in resource intake, at least in the early adult stage of this species.     

Meltwater discharge during the Holocene from the Wilkes subglacial basin revealed by beryllium isotope analysis of marine sediments

Understanding Antarctic Ice Sheet dynamics related to global climate change is of scientific and societal interest as the future behaviour of the ice sheet under the currently changing climate is unknown. We present beryllium‐10 (¹⁰Be) analysis of a high‐resolution marine sediment core from the Adélie Basin near the eastern Wilkes Land margin, which is susceptible to marine ice sheet instability due to the low‐lying nature and down‐sloping trough of the Wilkes Subglacial Basin. Combined with a newly constructed age model using compound specific radiocarbon dates, the data reveal three events associated with high meteoric ¹⁰Be at ca. ~10 ka, ca. ~6.5 ka and from ca. ~4 ka. We interpret these high meteoric ¹⁰Be events to be derived from the deposition of ¹⁰Be released from the ice sheet during meltwater discharge. In particular, the shift to higher meteoric ¹⁰Be concentration at~4 ka may correspond to changes in climate patterns at this time. Copyright © 2019 John Wiley & Sons, Ltd.