Contained density currents with high volume of release

Contained density currents with high volume of release reflect against the boundaries of the reception environment commonly leading to oscillatory flow. These flows exist in sediment clarifiers, compromising their operations, and deposited signatures of contained turbidity currents are found as part of the infill of sedimentary basins; for operation of the former and interpretation of the latter it is essential to understand the dynamic processes of these flows. Six lock‐exchange experiments with different initial densities were made in a horizontal flume, where the volume of the saline mixture in the lock was equivalent to the volume of the ambient fluid. A further two tests, with a repeated initial density, were made: one with high volume of release and very long duration; and another with low volume of release. Firstly, the movement of the current is discussed, including the oscillations within the experimental tank involving the density current and an upper layer counter‐current. It is shown that the cyclic behaviour is self‐similar with the reduced gravity of the initial density in the lock. Secondly, entrainment and water mixing processes are characterized. The time evolution of mixing is characterized qualitatively by analysing the background potential energy of the density distributions to show that mixing occurs even in the earlier stages of the current, and mainly within the first cycle of the oscillation. Quantified analysis reveals that, in currents with high volume of release, entrainment discharge is one order of magnitude higher, mainly due to the larger interface between the ambient fluid and the current. A model for the evolution of the mixing process is proposed for density currents with high volume of release. Finally, the dynamics of the head of the current is analysed. The entrainment in the head, when compared to the entrainment in the remainder body of the flows, is less important for the configuration with a larger lock.     

Late‐glacial to Holocene depositional architecture of the Ombrone palaeovalley system (Southern Tuscany,Italy): Sea‐level,climate and local control in valley‐fill variability

The Ombrone palaeovalley was incised during the last glacial sea‐level fall and was infilled during the subsequent Late‐glacial to Holocene transgression. A detailed sedimentological and stratigraphic study of two cores along the palaeovalley axis led to reconstruction of the post‐Last Glacial Maximum valley‐fill history. Stratigraphic correlations show remarkable similarity in the Late‐glacial to early‐Holocene succession, but discrepancy in the Holocene portion of the valley fill. Above the palaeovalley floor, about 60 m below sea‐level, Late‐glacial sedimentation is recorded by an unusually thick alluvial succession dated back to ca 18 cal kyr bp . The Holocene onset was followed by the retrogradational shift from alluvial to coastal facies. In seaward core OM1, the transition from inner to outer estuarine environments marks the maximum deepening of the system. By comparison, in landward core OM2, the emplacement of estuarine conditions was interrupted by renewed continental sedimentation. Swamp to lacustrine facies, stratigraphically equivalent to the fully estuarine facies of core OM1, represent the proximal expression of the maximum flooding zone. This succession reflects location in a confined segment of the valley, just landward of the confluence with a tributary valley. It is likely that sudden sediment input from the tributary produced a topographic threshold, damming the main valley course and isolating its landward segment from the sea. The seaward portion of the Ombrone palaeovalley presents the typical estuarine backfilling succession of allogenically controlled incised valleys. In contrast, in the landward portion of the system, local dynamics completely overwhelmed the sea‐level signal, following marine ingression. This study highlights the complexity of palaeovalley systems, where local morphologies, changes in catchment areas, drainage systems and tributary valleys may produce facies patterns significantly different from the general stratigraphic organization depicted by traditional sequence‐stratigraphic models.     

The alluvial architecture of a suspended sediment dominated meandering river: the Río Bermejo,Argentina

The alluvial architecture of fine‐grained (silt‐bed) meandering rivers remains poorly understood in comparison to the extensive study given to sand‐bed and gravel‐bed channels. This paucity of knowledge stems, in part, from the difficulty of studying such modern rivers and deriving analogue information from which to inform facies models for ancient sediments. This paper employs a new technique, the parametric echosounder, to quantify the subsurface structure of the Río Bermejo, Argentina, which is a predominantly silt‐bed river with a large suspended sediment load. These results show that the parametric echosounder can provide high‐resolution (decimetre) subsurface imaging from fine‐grained rivers that is equivalent to the more commonly used ground‐penetrating radar that has been shown to work well in coarser‐grained rivers. Analysis of the data reveals that the alluvial architecture of the Río Bermejo is characterized by large‐scale inclined heterolithic stratification generated by point‐bar evolution, and associated large‐scale scour surfaces that result from channel migration. The small‐scale and medium‐scale structure of the sedimentary architecture is generated by vertical accretion deposits, bed sets associated with small bars, dunes and climbing ripples and the cut and fill from small cross‐bar channels. This style of alluvial architecture is very different from other modern fine‐grained rivers reported in the literature that emphasize the presence of oblique accretion. The Río Bermejo differs from these other rivers because it is much more active, with very high rates of bank erosion and channel migration. Modern examples of this type of highly active fine‐grained river have been reported rarely in the literature, although ancient examples are more prevalent and show similarities with the alluvial architecture of the Río Bermejo, which thus represents a useful analogue for their identification and interpretation. Although the full spectrum of the sedimentology of fine‐grained rivers has yet to be revealed, meandering rivers dominated by lateral or oblique accretion probably represent end members of such channels, with the specific style of sedimentation being controlled by grain size and sediment load characteristics.     

An efficient quasi-Newton approximation-based SORM to estimate the reliability of geotechnical problems

The first order reliability method (FORM) is efficient, but it has limited accuracy; the second order reliability method (SORM) provides greater accuracy, but with additional computational effort. In this study, a new method which integrates two quasi-Newton approximation algorithms is proposed to efficiently estimate the second order reliability of geotechnical problems with reasonable accuracy. In particular, the Hasofer–Lind–Rackwitz–Fiessler–Broyden–Fletcher–Goldfarb–Shanno (HLRF–BFGS) algorithm is applied to identify the design point on the limit state function (LSF), and consequently to compute the first order reliability index; whereas the Symmetric Rank-one (SR1) algorithm is nested within the HLRF–BFGS algorithm to compute good approximations, yet with a reduced computational effort, of the Hessian matrix required to compute second order reliabilities. Three typical geotechnical problems are employed to demonstrate the ability of the suggested procedure, and advantages of the proposed approach with respect to conventional alternatives are discussed. Results show that the proposed method is able to achieve the accuracy of conventional SORM, but with a reduced computational cost that is equal to the computational cost of HLRF–BFGS-based FORM.     

防雷箱残压“二次感应”的研究试验与仿真

防雷箱广泛应用在各类低压配电系统的雷电防护中,为研究防雷箱在8/20μs冲击电流作用下常出现"二次感应"的现象,基于Haefely DIAS 733测试系统通过大量试验,结合电磁感应理论对感应电压进行计算,并利用PSPICE建立感应回路。结果表明:1防雷箱内部平行布线且输入输出同端口时,"二次感应"电压幅值服从电磁感应定律,且可进行较精确计算。2采用双绞线布线、地线与输出线非平行、输入与输出线异端口且与地线非平行3种方法可有效地降低因电磁感应而增加的残压,从而获得较低的输出残压。3试验表明,当内部采用输入与输出线异端口且与地线非平行的综合布线方案后,效果最明显,在60kA冲击电流下,相对未改进的防雷箱,采样点残压下降约45%。     

干涉图像第二类统计Goldstein自适应滤波方法

干涉图滤波是InSAR数据处理中的关键步骤之一,滤波结果的优劣会直接影响到相位观测的质量和最终产品精度。本文结合干涉图滤波算法的研究进展,对Goldstein频率域滤波及其经典改进算法进行了系统分析和比较,在此基础上提出了一种基于第二类统计的稳健相干性估计量的Goldstein自适应滤波方法。本文采用模拟数据和Envisat ASAR真实数据与现有方法进行了验证,试验结果表明,新的滤波方法在保持细节和抑制噪声方面优势更加明显。     

Delineation and assessment of Central Indian Suture through lineament extraction approach using Remote Sensing and Geographic Information System

Lineament extraction approach allowed mapping of larger number of lineaments in a classical manner in tectonic and structural studies. In the present study, various techniques were adopted to extract lineaments using Landsat ETM+ images. To remove the biasness of the images, some pre-processing techniques like stream ordering, band differencing, colour texturing were employed to enhance the edges of the structural features. Extracted lineaments and its distribution and orientation were mapped using ArcGIS Spatial analyst tool. Results of the study showed maximum number of lineaments were oriented in the ENE–SWS direction with 63° overall inclination. Accuracy assessment and validation were made with respect to visual interpretation and overlaying the lineament on Digital Topographic Model as well as with respect to an existing geological lineament map of the study site. The result of accuracy assessment indicates higher compatibility of Central Indian Suture with the geological map of the study area.     

An open source GIS‐based Planning Support System: Application to the land use plan of La Troncal,Ecuador

Planning Support Systems (PSS) comprise a wide variety of geo‐technological tools related to GIS and spatial modeling aimed at addressing land planning processes. This article describes the OpenRules system, a PSS based on a previous system called RULES. Among OpenRules new features are its architecture, based exclusively on free and open source software, and its applicability to all land use types, including rural and urban uses. In addition, OpenRules incorporates an unlimited number of land evaluation factors and a new objective in land use spatial allocation. OpenRules has been programmed in Java and implemented as a module of the free GIS software gvSIG, with full integration between the GIS and the decision support tools. Decision support tools include multicriteria evaluation, multiobjective linear programming and heuristic techniques, which support three basic stages of land use planning processes, namely land suitability evaluation, land use area optimization and land use spatial allocation. The application of OpenRules to the region of La Troncal, Ecuador, demonstrates its capability to generate alternative and coherent solutions through a scientific and justified procedure at low cost in terms of time and resources.     

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.     

The Relationship between Jurassic Coal Measures and Sandstone-type Uranium Deposits in the Northeastern Ordos Basin, China

Outcrop and drill hole data show that the Jurassic coal measures in the northeastern Ordos Basin are composed mainly of the Yan'an Formation and the lowstand system tract of the Zhiluo Formation,and there is a regional unconformity between them. The Dongsheng uranium deposit is associated with the Jurassic coal measures. Research data indicate that the Jurassic coal measures in the study area have a certain hydrocarbon-generating capacity,although the metamorphic grade is low(Ro=0.40%–0.58%). In the Dongsheng region alone,the accumulative amount of generated coalbed methane(CBM) is about 2028.29 × 108 –2218.72 × 108 m~3; the residual amount is about 50.92 × 108 m~3,and the lost amount is about 1977 × 108 m~3. Analysis of the burial history of the host rocks and the evolutionary history of the Dongsheng uranium deposit suggests that the Jurassic coal measures generated hydrocarbon mainly from Middle Jurassic to Early Crataceous,which is the main mineralization phase of the Dongsheng uranium deposit. By the Late Cretaceous,a mass of CBM dissipated due to the strong tectonic uplift,and the Dongsheng uranium deposit stepped into the preservation phase. Therefore,the low-mature hydrocarbon-containing fluid in the Jurassic coal measures not only served as a reducing agent for the formation of sandstone-type uranium deposits,but also rendered the second reduction of paleo-interlayer oxidation zone and become the primary reducing agent for ore conservation. Regional strata correlation reveals that the sandstone-type uranium reservoir at the bottom of the Zhiluo Formation is in contact with the underlying industrial coal seams in the Yan'an Formation through incision or in the form of an unconformity surface. In the Dongsheng region with poorly developed fault systems,the unconformity surface and scour surface served as the main migration pathways for low-mature hydrocarbon-containing fluid migrating to the uranium reservoir.