Stratigraphic architecture of Solander Basin records Southern Ocean currents and subduction initiation beneath southwest New Zealand

Solander Basin is characterized by subduction initiation at the Pacific‐Australia plate boundary, where high biological productivity is found at the northern edge of the Antarctic Circumpolar Current. Sedimentary architecture results from tectonic influences on accommodation space, sediment supply and ocean currents (via physiography); and climate influence on ocean currents and biological productivity. We present the first seismic‐stratigraphic analysis of Solander Basin based on high‐fold seismic‐reflection data (voyage MGL1803, SISIE). Solander Trough physiography formed by Eocene rifting, but basinal strata are mostly younger than ca. 17 Ma, when we infer Puysegur Ridge formed and sheltered Solander Basin from bottom currents, and mountain growth onshore increased sediment supply. Initial inversion on the Tauru Fault started at ca. 15 Ma, but reverse faulting from 12 to ca. 8 Ma on both the Tauru and Parara Faults was likely associated with reorganization and formation of the subduction thrust. The new seabed topography forced sediment pathways to become channelized at low points or antecedent gorges. Since 5 Ma, southern Puysegur Ridge and Fiordland mountains spread out towards the east and Solander Anticline grew in response to ongoing subduction and growth of a slab. Solander Basin had high sedimentation rates because (1) it is sheltered from bottom currents by Puysegur Ridge; and (2) it has a mountainous land area that supplies sediment to its northern end. Sedimentary architecture is asymmetric due to the Subtropical Front, which moves pelagic and hemi‐pelagic sediment, including dilute parts of gravity flows, eastward and accretes contourites to the shelf south of Stewart Island. Levees, scours, drifts and ridges of folded sediment characterize western Solander Basin, whereas hemi‐pelagic drape and secondary gravity flows are found east of the meandering axial Solander Channel. The high‐resolution record of climate and tectonics that Solander Basin contains may yield excellent sites for future scientific ocean drilling.     

Low‐accommodation and backwater effects on sequence stratigraphic surfaces and depositional architecture of fluvio‐deltaic settings (Cretaceous Mesa Rica Sandstone,Dakota Group,USA)

The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.     

Three‐dimensional simulation of tsunami run‐up around conical island

At the circular Babi Island in the Flores tsunami (1992) and pear shaped island in the Okushiri event (1993), unexpectedly large tsunami run‐up heights in the lee of conic islands were observed. The flume and basin physical model studies were conducted in the Coastal Hydraulic Laboratory, Engineering Research and Development Center, U.S. Army Corps of Engineers to provide a better understanding of the physical phenomena and verify numerical models used in predicting tsunami wave run‐up on beaches, islands, and vertical walls. Reasonably accurate comparison of run‐up height of solitary waves on a circular island has been obtained between laboratory experimental results and two‐dimensional computation model results. In this study we apply three‐dimensional RANS model to simulate wave run‐up on conical island. In the run‐up computation we obtain that 3D calculations are in very good comparison with laboratory and 2D numerical results. A close examination of the three‐dimensional velocity distribution around conical island to compare with depth‐integrated model is performed. It is shown that the velocity distribution along the vertical coordinate is not uniform: and velocity field is weaker in the bottom layer and higher on the sea surface. The maximum difference (about 40%) appears at the time when solitary wave reached the circular island.     

相空间反演方法在表层水温预报中的应用

利用相空间理论及方法对渤、黄、东海共4个站位近十几年的旬平均SST进行分析。结果表明：表层水温具有混饨特性，其吸引子关联维数平均约为1．23、嵌入相空间维数为6（渤、黄海）和7（东海178号站位）、二阶Renyi熵平均约为3．7×10-4（1／d）及平均可预报时间尺度平均为27个点；基于以上分析结果运用相空间反演方法建立了旬平均SST的反演模型，并且在试预报的前5旬的最大相对误差约为4．2％。     

伪近邻方法在ARMA系统阶数判别中的应用

从相空间重构的角度,提出利用伪近邻方法判别ＡＲＭＡ 系统的总阶数。该方法可在数据量较小和阈值固定的情况下判别ＡＲＭＡ 系统总阶数。数值计算表明,使用该方法判别线性ＡＲＭＡ系统总阶数,取得了比较满意的结果。     

从正反两个角度探讨摆式波力电站的吸能机制

本文主要论述了摆式波力电站的吸能机制,提出了吸能原理,从力和作功的角度探讨了吸能的实质,分析比较了几种摆板运动方程形式之间的联系和区别。给出了波能转换效率的定义,并进一步分析了波能转换效率的组成和性质。     

Distribution characteristics of delta reservoirs reshaped by bottom currents: A case study from the second member of the Yinggehai Formation in the DF1-1 gas field,Yinggehai Basin,South China Sea

The Dongfang1-1 gas field (DF1-1) in the Yinggehai Basin is currently the largest offshore self-developed gas field in China and is rich in oil and gas resources. The second member of the Pliocene Yinggehai Formation (YGHF) is the main gas-producing formation and is composed of various sedimentary types; however, a clear understanding of the sedimentary types and development patterns is lacking. Here, typical lithofacies, logging facies and seismic facies types and characteristics of the YGHF are identified based on high-precision 3D seismic data combined with drilling, logging, analysis and testing data. Based on 3D seismic interpretation and attribute analysis, the origin of high-amplitude reflections is clarified, and the main types and evolution characteristics of sedimentary facies are identified. Taking gas formation upper II (IIU) as an example, the plane distribution of the delta front and bottom current channel is determined; finally, a comprehensive sedimentary model of the YGHF second member is established. This second member is a shallowly buried “bright spot” gas reservoir with weak compaction. The velocity of sandstone is slightly lower than that of mudstone, and the reflection has medium amplitude when there is no gas. The velocity of sandstone decreases considerably after gas accumulation, resulting in an increase in the wave impedance difference and high-amplitude (bright spot) reflection between sandstone and mudstone; the range of high amplitudes is consistent with that of gas-bearing traps. The distribution of gas reservoirs is obviously controlled by dome-shaped diapir structural traps, and diapir faults are channels through which natural gas from underlying Miocene source rocks can enter traps. The study area is a delta front deposit developed on a shallow sea shelf. The lithologies of the reservoir are mainly composed of very fine sand and coarse silt, and a variety of sedimentary structural types reflect a shallow sea delta environment; upward thickening funnel type, strong toothed bell type and toothed funnel type logging facies are developed. In total, 4 stages of delta front sand bodies (corresponding to progradational reflection seismic facies) derived from the Red River and Blue River in Vietnam have developed in the second member of the YGHF; these sand bodies are dated to 1.5 Ma and correspond to four gas formations. During sedimentation, many bottom current channels (corresponding to channel fill seismic facies) formed, which interacted with the superposed progradational reflections. When the provenance supply was strong in the northwest, the area was dominated by a large set of delta front deposits. In the period of relative sea level rise, surface bottom currents parallel to the coastline were dominant, and undercutting erosion was obvious, forming multistage superimposed erosion troughs. Three large bottom current channels that developed in the late sedimentary period of gas formation IIU are the most typical.     

Communities structure of the planktonic halophiles in the solar saltern of Sfax,Tunisia

The composition and distribution of the main planktonic halophilic micro-organisms (heterotrophic and autotrophic picoplankton, nanoplankton, phytoplankton, ciliates) and metazooplankton were investigated in six ponds of increasing salinity in the solar salt works of Sfax, Tunisia, from January to December 2003. Marked changes in the composition and biomass of the communities were found along the salinity gradient, especially at salinities of 150 and 350. Autotrophic picoplankton, nanoplankton, diatoms, dinoflagellates and ciliates characterized the less salted ponds. Planktonic biomass was the highest at intermediate salinity as a consequence of a bloom of Ochromonas. Species richness of phytoplankton, ciliates and zooplankton greatly decrease above a salinity of 150 and typical halophiles (Dunaliella salina, cyanobacteria, Fabrea salina and Artemia salina) were found between 150 and 350 salinity. In this environment, F. salina appeared more adapted than the brine shrimp to survive during phytoplankton blooms. The halophilic plankton was however almost entirely composed of heterotrophic prokaryotes in the crystallizers. We thus observed a progressive disappearance of the autotrophic planktonic communities along the salinity gradient. Multivariate analysis of the communities provides evidence that ponds represent discrete aquatic ecosystems within this salt works.     

Wave diffraction and near-trapping by a multi-column gravity-based structure

This paper is concerned with the diffraction of water waves by offshore structures, with the ultimate aim of proposing tools for guiding airgap design. The diffraction of monochromatic waves by an array of four bottom mounted cylinders and a gravity-based structure is studied in detail using linear and second order theory. The phenomenon of near-trapping is investigated, allowing guidelines for airgap design to be established. When contemplating airgap design, however, it is crucially important that consideration is given to the largest waves in a sea state. Therefore, in this study a design wave, called NewWave, is proposed as a realistic model for large ocean waves and is used as the incident wave field in the wave-structure diffraction analysis.     

自主式水下机械手系统研究

本文从水下机械手的总体设计，关节直流电机的驱动和调速，手臂上声纳的水下搜索与跟踪，机械手系统的智能控制和电源等几个方面，介绍了有关自主式水下机械手系统的研究，可为研制自主式水下作业系统提供参考