The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

Origin and three-dimensional fluorescence spectrum of the chromophoric dissolved organic matter in Yangtze estuary, East China

Dissolved organic matter （DOM） is an important chemical component in natural water. Chromophoric dissolved organic matter （CDOM）, a fraction of optical properties, plays art important role in the biogeochemical cycle of nutrients in aquatic environment. People realized that DOM cycle is crucial in the global carbon and nitrogen flux, and also is inherently related to nutrients and trace metal elements. Therefore, CDOM was concerned by scientists in global oceanography and limnology fields. Water samples were collected from three sections （North Channel, South Channel and Zhuyuan） of the Yangtze （Changjiang River） estuary in March 2006 Three-dimensional excitation emission matrix （3-DEEM） fluorescence spectra were analyzed for those filtrates through Whatman GF/F filters. Dissolved organic carbon （DOC） was also measured by TOC analyzer. The tidal variety was also taken into account. The 3-D EEM fluorescence scans suggested the fluorescence characteristics of humic acid （Ex=332-344 nm, Em=439-451 nm） and fulvic acid （Ex=250-254 nm, Em=472-478 nm） were obvious, and the fluorescence group of protein-like and tyrosine （Ex=230 nm, Em=283 nm） was also found. They are mainly composed of CDOM in the Yangtze estuary. Further data analysis, especially the fluorescence index （f 450/500）, showed that terrestrial signal was rather strong （1.41-1.65） in the surface water, however, some terrestrial CDOM signals of bottom water showed excursions （1.28-1.39）. On the other hand, anthropogenic sign was impressed in the waters of Zhuyuan, which is one of the main drain outlets of Shanghai Metropolis. DOC concentrations ranged from 2.2 mg/L to 3.4 mg/L in Zhuyuan and South Channel, and from 2.0 mg/L to 2.4 mg/L in North Channel. The tide effect played a role in the composition of the CDOM measured by 3-D fluorescence scan technology.     

Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects

Heavy metal distribution patterns in river sediments aid in understanding the exogenic cycling of elements as well as in assessing the effect of anthropogenic influences. In India, the Subernarekha river flows over the Precambrian terrain of the Singhbhum craton in eastern India. The rocks are of an iron ore series and the primary rock types are schist and quartzite. One main tributary, the Kharkhai, flows through granite rocks and subsequently flows through the schist and quartzite layers. The Subernarekha flows through the East Singhbhum district, which is one of India’s industrialised areas known for ore mining, steel production, power generation, cement production and other related activities. Freshly deposited river sediments were collected upstream and downstream the industrial zone. Samples were collected from four locations and analysed in <63-μm sediment fraction for heavy metals including Zn, Pb, Cd and Cu by anodic stripping voltammetry. Enrichment of these elements over and above the local natural concentration level has been calculated and reported. Sediments of the present study are classified by Muller’s geo-accumulation index (I _geo) and vary from element to element and with climatic seasons. During pre-monsoon period the maximum I _geo value for Zn is moderately to highly polluted and for Cu and Pb is moderately polluted, respectively, based on the Muller’s standard. Anthropogenic, lithogenic or cumulative effects of both components are the main reasons for such variations in I _geo values. The basic igneous rock layer through which the river flows or a seasonal rivulet that joins with the main river may be the primary source for lithogenic components.     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.     

科尔沁沙地土地利用与耕作方式对土壤风蚀的影响

土壤风蚀造成的直接生态后果是土地资源的退化。在春播前两次沙尘暴事件中,对科尔沁沙地几种具有代表性的土地类型的土壤风蚀量及土壤特性进行了野外测定、分析,结果表明:(1)在同一沙尘暴天气下,由于土地利用和耕作方式的不同,土壤风蚀量存在着差异,新垦农地和翻耕农地的风蚀量显著高于未垦草地、免耕农地和麻黄地;免耕农地则与未垦草地的风蚀量相差不大,风蚀危害较轻;麻黄地几乎不受风蚀侵害。新垦农地、翻耕农地、免耕农地、未垦草地、麻黄地两次观测的土壤风蚀量平均值依次为24.59、15.60、2.26、1.46和0.22 g/h.cm2。(2)基于土壤特性计算的土壤退化指数结果表明,新垦农地和翻耕农地发生了较为严重的退化。     

GIS-based flood hazard mapping at different administrative scales: A case study in Gangetic West Bengal, India

This paper addresses the need for an efficient and cost-effective methodology for preparing flood hazard maps in data poor countries, particularly those under a monsoon regime where floods pose a recurrent danger. Taking Gangetic West Bengal, India, as an example and using available historical data from government agencies, the study compiled a regional map indicating hazard prone subregional areas for further detailed investigation, thereby isolating actual high risk localities. Using a GIS (Geographical Information System), a composite hazard index was devised incorporating variables of flood frequency, population density, transportation networks, access to potable water, and availability of high ground and maximum risk zones were mapped accordingly. A digital elevation model derived from high resolution imagery available in the public domain was used to calculate elevated areas suitable for temporary shelter during a flood. Selecting administrative units of analysis at the lowest possible scales – rural development blocks (regional) and revenue villages (subregional) – also ensures that hazard mapping is prepared in line with the existing rural planning and administrative authorities responsible for remedial intervention.     

Seaweed floristic studies along tsunami affected Indian coasts: A litmus test scenario after 26th December 2004

On 26th December 2004, the world witnessed the devastating power of tsunami, affecting many countries, bordering the Indian Ocean region. This has caused significant changes in the shallow and intertidal regions of the Indian coast, especially the Andaman and Nicobar Islands, Tamil Nadu, Kerala and Pondicherry. The baseline data on biomass availability and distribution of benthic intertidal seaweed species were collected immediately after this catastrophic event by spot surveying 11 selected localities of the above-mentioned regions. In all, 45 species belonging to 31 genera were recorded during the present survey, the maximum number of seaweed species were recorded at Thirumullavarum, Kerala with the minimum at Car Nicobar, Andaman and Nicobar Islands. A very different trend was observed in the case of biomass availability at some locations which was due to the influence of habitat suitability over the tsunami damage. The details of this study have been provided in the present communication     

电子地图中多尺度地图数据显示的研究

将计算机三维模型简化中的LOD思想引入到电子地图的组织和显示中,提出了同一比例尺数字地图不同详细程度的分层显示方法和不同比例尺数字地图嵌套显示方法,实现了电子地图的多级缩放。     

数据备份服务器备份性能分析

针对数据备份服务器备份性能优化问题，分别对实时数据存储与历史数据备份之间的关系、数据备份服务器所备份的数据类型非唯一性、客户数量对备份服务器备份效率的影响三方面进行初步的测试与分析，提出了通过优化数据块的选取、优化数据采集方式、优化备份策略提高备份服务器备份效率的基本方法。     

泥石流汇流槽可靠度分析

汇流槽是泥石流治理工程中常用的工程措施之一。文章基于汇流槽的倾倒破坏、滑移破坏及地基破坏模式，通过对汇流槽设计影响强烈的岩土参数、几何特征、荷载因素等敏感因子的求解方法及分布特征分析，从汇流槽的抗倾稳定、抗滑稳定和基底应力要求三方面建立极限状态方程。对于每个极限状态方程，在泰勒级数对非线性极限状态方程线性化后，运用一次二阶矩的理论，先假定失效点P^＊，求解出相应的均值和方差。然后根据可靠的定义，得到相应的可靠度指标，通过迭代法求解真正失效点的可靠度指标βi。最后根据3个状态方程相互独立的假定，得出整个结构的可靠度指标β。该方法在平川泥石流防治工程中得到了成功的运用。这对于可靠度设计方法在泥石流防治工程中的运用进行了有益的探讨。