Modification of strain wedge method for lateral soil-pile interaction in sandEI北大核心CSCD

A modified strain wedge (SW) method for analyzing the behavior of laterally loaded single piles in sand is proposed. The modified model assumes that the lateral displacements of a pile behind the three-dimensional passive soil wedge are nonlinear, which makes the horizontal soil strain variable with depths instead of a constant value in the original strain wedge model, and also employs two different hyperbolic models, one for describing horizontal stress increment-strain behavior of soil in the wedge, and the other for describing the shear stress-displacement property at the interface between soil and pile shafts. An example is analyzed to demonstrate the effectiveness of the modified method, and a good agreement is obtained. Finally, the effects of modifications on the lateral bearing capacity of pile shafts are discussed. The results show that the problem of overestimating the lateral bearing capacity of piles with strain wedge method can be ameliorated by introducing the assumption of nonlinear lateral displacements of piles. It makes the SW method more convenient and effective in analyzing the behavior of laterally loaded piles by introducing the new relationships of horizontal stress increment-strain and shear stress-displacement.     

不同地形条件地面同步光谱定标场对比研究

利用美国ASD公司的FieldSpec Pro FR地面波谱仪,选择5°视场角探头和135cm探头距测试地物高度,开展0°、5°、10°、15°、20°等五种不同地形坡度明、暗地物自然定标场地面波谱测试。通过对比研究不同地形坡度具代表性、能真实反映被测试目标平均自然性的各波谱测试点波谱曲线特征,得出0°、5°地形坡度获取的波谱曲线连续、平滑,信噪比高,没有混入大气水气吸收、仪器噪声等因素导致的剧烈波动、跳跃现象或尖锐锯齿状噪声,波谱特征明显,吸收峰最小值位置清晰可辨,各波谱测试点波谱曲线变化幅度小,整体反射率值变化小,Fe~(2+)、Fe~(3+)、Al-OH、Mg-OH、CO_3~(2-)等分子基团与离子波谱的诊断性波谱特征位置清晰可辨。因此0°和5°坡度地形条件获取的地面同步自然场光谱定标波谱曲线,可以满足航空高光谱遥感数据的大气校正、光谱重建和空、地回归分析等所需的地面波谱数据要求。     

伊通盆地鹿乡断陷C区块含油饱和度与含油性分析

综合研究伊通盆地鹿乡断陷双二段储层的岩性、含油性和含油饱和度,确定了适用于本区的含油饱和度计算方法,并与实际含油性进行了对比,分析了沉积和构造对含油性的影响。研究区双二段含油储层的岩性以粉砂岩、细砂岩和砂砾岩为主,含油级别为荧光级以上。根据阿尔奇公式计算出的含油饱和度大部分与实际的含油性相符合,并将含油饱和度70%、50%和38%值作为本区气层、油层、油水层和水层的区分标准。本区储层的含油性受到沉积和构造两方面的控制,沉积作用主要控制储层的岩石结构和物性,构造控制油气的聚集,即在构造高部位,实际含油饱和度比计算结果要高,而在构造低部位,实际含油饱和度比计算结果要低。     

A synthetic aperture radar sea surface distribution estimation by n-order Bézier curve and its application in ship detection

To dates,most ship detection approaches for single-pol synthetic aperture radar(SAR) imagery try to ensure a constant false-alarm rate(CFAR).A high performance ship detector relies on two key components:an accurate estimation to a sea surface distribution and a fine designed CFAR algorithm.First,a novel nonparametric sea surface distribution estimation method is developed based on n-order Bézier curve.To estimate the sea surface distribution using n-order Bézier curve,an explicit analytical solution is derived based on a least square optimization,and the optimal selection also is presented to two essential parameters,the order n of Bézier curve and the number m of sample points.Next,to validate the ship detection performance of the estimated sea surface distribution,the estimated sea surface distribution by n-order Bézier curve is combined with a cell averaging CFAR(CA-CFAR).To eliminate the possible interfering ship targets in background window,an improved automatic censoring method is applied.Comprehensive experiments prove that in terms of sea surface estimation performance,the proposed method is as good as a traditional nonparametric Parzen window kernel method,and in most cases,outperforms two widely used parametric methods,K and G0 models.In terms of computation speed,a major advantage of the proposed estimation method is the time consuming only depended on the number m of sample points while independent of imagery size,which makes it can achieve a significant speed improvement to the Parzen window kernel method,and in some cases,it is even faster than two parametric methods.In terms of ship detection performance,the experiments show that the ship detector which constructed by the proposed sea surface distribution model and the given CA-CFAR algorithm has wide adaptability to different SAR sensors,resolutions and sea surface homogeneities and obtains a leading performance on the test dataset.     

东山乌礁湾海滩表层沉积物粒度时空变化分析

为了进一步了解海岛岬湾海岸表层沉积物粒度的时空分布特征和形成机制,作者以福建东山岛乌礁湾为典型研究区,通过秋、春、夏3个不同季节海滩表层沉积物的采集和点位测量,综合应用激光法和筛析法进行粒度测定。结果表明,东山乌礁湾海滩表层沉积物以0.16～0.50 mm之间的中、细砂为主,并含有少量的粗砂和细砾,这与区域砂质沉积背景有关;湾内从南到北剖面沉积物粒径由粗砂到细砂逐渐变细,主要受剖面地形、局地物源、季节性风浪作用和近岸往复水动力的影响。时间变化上,各取样站位表现出沉积物粒径粗、细不同程度的多种变化趋势,以秋季为参考,整体上表现为由南到北粒级的变小、增大和稳定,这与东北、南南西季风影响下的浪、潮作用以及沿岸流系格局变化下的水动力环境有关。     

高温刺激导致虾夷扇贝死亡因素的探究

本文探究了高温刺激导致一龄和二龄虾夷扇贝死亡的原因。在高温刺激以及恢复过程中,两种贝龄的扇贝存活率存在显著差异(P0.05),同时两者的谷丙转氨酶(glutamic-pyruvic transaminase,GPT)活性、p53蛋白含量、总抗氧化能力(total antioxidant capacity,TAOC)以及HSP70(heat shock protein 70)含量在高温刺激以及恢复过程中的变化均存在显著差异。而且这些酶的活性(TAOC活性除外)以及蛋白质含量(p53以及HSP70)均受到贝龄、处理时间以及两者综合作用的显著影响。经过Cox模型分析可知,虾夷扇贝受到高温刺激后的存活受到贝龄、GPT活性、TAOC活性、p53含量以及HSP70含量的显著影响。此外,高温刺激会影响扇贝的心跳频率以及心输出量,从而影响心脏对机体的供氧供血能力,影响扇贝对高温的适应能力。     

基于Neuman井流理论确定玄武岩潜水含水层渗透系数的应用——以吉林靖宇煤矿为例

全面分析研究区玄武岩潜水含水层水文地质条件的基础上,对稳定流和非稳定理论确定潜水含水层渗透系数的优缺点进行了对比,认为非稳定井流公式确定玄武岩潜水含水层渗透系数是合理的。Aquifer Test软件基于Neuman井流理论配线法求参原理,运用计算机完成了自动求参,避免了人工配线的不足。该文根据吉林靖宇煤矿研究区玄武岩潜水含水层非稳定流抽水试验,分别用Aquifer Test软件和稳定井流公式进行了求参,并对比分析得出:玄武岩含水层弹性释水作用影响时间较长,利用Neuman潜水井流公式求参可靠,且更逼近现实;用Aquifer Test软件实现了自动求参,具有操作简单规范、可比性好的优点。     

西藏拉萨地体西北部革吉地区两期早白垩世岩浆作用——锆石U-Pb年龄、Hf同位素和地球化学特征

邦巴岩体位于拉萨地块西部革吉地区,由主体花岗岩、花岗闪长岩、闪长质包体及一系列近平行、南北向展布的花岗斑岩脉体组成。野外地质调查和LA-MC-ICP-MS锆石U-Pb定年表明,革吉地区白垩纪的两期岩浆活动分别发生在131~132Ma和127Ma。早期岩浆作用形成主体花岗岩、花岗闪长岩及闪长质包体,具有以下特征:(1)明显富集K、Cs等大离子亲石元素,亏损Nb、Ti、Zr等高场强元素;(2)具有明显的负Eu异常(Eu/Eu*=0.49~0.61)及负Ce异常;(3)具负εHf(t)值(-3.2~-0.3)及古老的地壳模式年龄(1.210~1.399Ga);(4)初始Sr同位素比值为0.70424~0.71472,εHf(t)值为-5.70~-5.54。晚期岩浆作用形成花岗斑岩脉体,具有以下特征:(1)富集K、Cs等大离子亲石元素,强烈亏损Nb、Ta、Ti等高场强元素;(2)基本不具有负Eu异常或具有轻微的负Eu异常(Eu/Eu*=0.74~0.87);(3)具有更老的Hf同位素地壳模式年龄(1.226~1.576Ga)及更负的大范围变化的εHf(t)值(-6.1~-0.7)。晚期岩浆作用锆饱和温度(777~796℃)及轻稀土元素不饱和温度(794~812℃)均高于早期岩浆的锆饱和温度(661~762℃)及轻稀土元素不饱和温度(750~769℃)。上述特征表明,两期岩浆作用均为中拉萨地块古老基底部分与地幔物质混染部分熔融的产物,随着岩浆作用的持续进行,岩浆中的古老地壳组分增加,熔体温度也增加,可能与南向俯冲的班公-怒江洋壳回转驱动的地幔岩浆活动向北迁移有关。     

围压和孔隙结构对不同粒级砂岩孔隙度渗透率的影响实验研究

孔隙度和渗透率是储层评价的两个重要参数.岩石毛管压力曲线和核磁共振T2谱图是描述储层微观结构特征的重要参数.通过测量不同压力条件下岩心样品的孔隙度和渗透率,得到了孔隙度和渗透率随压力的变化情况.实验结果表明：孔隙度和渗透率随着压力的增加而降低,并且与压力服从对数函数变化规律.不同孔隙度渗透率区间的砂岩样品,孔隙度和渗透率随着压力变化的趋势不同.通过测量不同粒级砂岩样品的毛管压力曲线和核磁共振T2谱图,证实了孔隙结构对孔隙度和渗透率的影响,微观孔隙结构是决定渗透性好坏的关键因素.     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.