西洋东大港水道流速垂线分布研究

对辐射沙洲海域东大港4#站位连续2个潮周期的流速测量资料进行了分析、研究,拟合给出了流速垂线分布关系,并根据实际测量资料确定了该站位6个水层的浑水水流尾流函数项表达式。这些表达式表明浑水水流尾流函数是相对深度和摩阻速度的函数。探讨分析了尾流函数的空间分布和潮周期过程。非恒定流的水流尾流函数项的准确表达,对于揭示含沙水流流速结构及水、沙相影响作用规律将起到启发和推动作用。     

珠江口伶仃洋锋的类别及其对沉积的影响

根据近年在珠江口伶仃洋的观测资料，对比国外有关河口锋的定义，归纳了伶仃洋内几种锋的现象，计有潮侵锋、岬角锋及湖水退急时的浅滩锋等。解释了锋生的原因与潮汐进退，特别与随潮入侵的咸水关系。文中也探讨了这些锋对沉积环境的影响，认为它是陆架水入侵河口地区的一种不容忽视的沉积动力过程。     

高压气藏不动管柱分层压裂工艺研究与应用

川西低渗高压气藏具有多层系的特点,层间距离一般在十至百米左右。为了提高气井产量与开采经济效益,鉴于气井加砂压裂后压井会严重伤害储层,影响压裂效果,采用压裂管柱直接作为生产管柱,研究形成了以FCY211及Y241封隔器不同组合的两层不动管柱分层压裂工艺。同时,在成熟的两层分压工艺基础上,结合投球选压工艺,研究形成了以“工具分层＋投球选压”不动管柱三层分层的压裂工艺。现场应用实践表明,分层压裂极大地增加了单井的产能,取得了明显经济效益,对类似气藏的多层压裂与开采提供了有益参考。     

Controls on reservoir heterogeneity of tight sand oil reservoirs in Upper Triassic Yanchang Formation in Longdong Area,southwest Ordos Basin,China: Implications for reservoir quality prediction and oil accumulation

Compared to conventional reservoirs, pore structure and diagenetic alterations of unconventional tight sand oil reservoirs are highly heterogeneous. The Upper Triassic Yanchang Formation is a major tight-oil-bearing formation in the Ordos Basin, providing an opportunity to study the factors that control reservoir heterogeneity and the heterogeneity of oil accumulation in tight oil sandstones.The Chang 8 tight oil sandstone in the study area is comprised of fine-to medium-grained, moderately to well-sorted lithic arkose and feldspathic litharenite. The reservoir quality is extremely heterogeneous due to large heterogeneities in the depositional facies, pore structures and diagenetic alterations. Small throat size is believed to be responsible for the ultra-low permeability in tight oil reservoirs. Most reservoirs with good reservoir quality, larger pore-throat size, lower pore-throat radius ratio and well pore connectivity were deposited in high-energy environments, such as distributary channels and mouth bars. For a given depositional facies, reservoir quality varies with the bedding structures. Massive- or parallel-bedded sandstones are more favorable for the development of porosity and permeability sweet zones for oil charging and accumulation than cross-bedded sandstones.Authigenic chlorite rim cementation and dissolution of unstable detrital grains are two major diagenetic processes that preserve porosity and permeability sweet zones in oil-bearing intervals. Nevertheless, chlorite rims cannot effectively preserve porosity-permeability when the chlorite content is greater than a threshold value of 7%, and compaction played a minor role in porosity destruction in the situation. Intensive cementation of pore-lining chlorites significantly reduces reservoir permeability by obstructing the pore-throats and reducing their connectivity. Stratigraphically, sandstones within 1 m from adjacent sandstone-mudstone contacts are usually tightly cemented (carbonate cement > 10%) with low porosity and permeability (lower than 10% and 0.1 mD, respectively). The carbonate cement most likely originates from external sources, probably derived from the surrounding mudstone. Most late carbonate cements filled the previously dissolved intra-feldspar pores and the residual intergranular pores, and finally formed the tight reservoirs.The petrophysical properties significantly control the fluid flow capability and the oil charging/accumulation capability of the Chang 8 tight sandstones. Oil layers usually have oil saturation greater than 40%. A pore-throat radius of less than 0.4 μm is not effective for producible oil to flow, and the cut off of porosity and permeability for the net pay are 7% and 0.1 mD, respectively.     

Seismic geomorphology,architecture and genesis of Miocene shelf sand ridges in the Pearl River Mouth Basin,northern South China Sea

Multiple stages of large-scale shelf sand ridges, including the shoreface-attached and the offshore types, have developed in the Miocene successions on the mid-shelf region of the Pear River Mouth Basin, northern South China Sea. Utilizing a high-quality 3D seismic data set, accompanying 2D seismic profiles and well logs, the morphology, architecture and genesis of these shelf sand ridges have been systematically investigated in this study. The ridges are of very large scale, with the largest one having a maximum height of 64 m, a width of more than 20 km and a length of 37 km within the 3D survey area. Being mound-shaped, they also display obvious asymmetry character, with the ridge crest preferentially located on the SE side. Three main internal components, including the ridge front, central ridge and the ridge tail, have been recognized through careful anatomy analysis of the two most well-imaged ridges, each displaying distinct expressions on seismic amplitudes and geometries. In the plan view, most of the shelf sand ridges are generally NE–SW oriented and widening to the SW direction. Scouring features can also be clearly observed along the SW direction, including scour depressions and linear sandy remnants. On well logs, the shelf sand ridges are represented by an overall coarsening-upward pattern. Intervals with blocky sandstones are preferentially present on higher locations due to a differential winnowing process controlled by shelf topography.Plenty of evidence indicates that these ridges were primarily formed by the reworking of forced regressive or lowstand deltaic deposits under a persistent southwesterly flowing current during the subsequent transgression. This very current is a composite one, which is speculated to consist of winter oceanic current, SCSBK (South China Sea Branch of Kuroshio) intrusion onto the shelf and internal waves propagating from the Luzon Strait. Tidal currents might have contributed to the SE growth of the ridge. In response to the reglaciation of Antarctic ice-sheet and the closure of Pacific-Indian ocean seaway in the middle Miocene, the intensification of the North Pacific western boundary current was considered to have potential links to the initiation of the shelf sand ridges at ∼12 Ma. The development of shelf ridges was terminated and replaced by rapid deltaic progradation at ∼5.5 Ma.     

Clogging of saturated porous media by silt‐sized suspended solids under varying physical conditions during managed aquifer recharge

Managed aquifer recharge is an effective method for utilizing excess flood flows, but clogging of porous media is a limiting factor in the implementation of this water storage technique. In recent years, much research on the physical clogging of porous media during artificial recharge has been conducted. However, the understanding of clogging due to silt‐sized suspended solids (SS) is still inadequate, especially under varying physical conditions. Here, we subjected sand columns to controlled rates of flow and SS suspensions to investigate the influence of media size, SS size, SS concentration, and flow velocity on the clogging of porous media by silt‐sized SS. The results show that the diameter ratio of SS particles to sand grains is the dominant factor influencing the position of physical clogging. As pore velocity increased, the mobility of silt‐sized SS was enhanced and retention in the porous media decreased noticeably. The spatial retention profiles in the porous media were found to vary greatly at different flow velocities. The SS concentration of the infiltrating suspension also dramatically influenced the mobility and deposition of silt‐sized SS particles, such that high concentrations accelerated the clogging process. As the different physical factors changed, the breakthrough curves and retention profiles of silt‐sized SS particles changed obviously and the mechanisms of retention differed. On the whole, clogging position is mainly determined by particle size ratio, but clogging rate is dominated by a variety of factors including particle size ratio, SS concentration, and flow velocity.     

Statistical analysis of the effects on overland flow of spatial variability in soil hydraulic conductivity / Analyse statistique des effets de la variabilité spatiale de la conductivité hydraulique du sol sur l'écoulement de surface

Abstract

The effects of spatial variation of the saturated hydraulic conductivity (K _s ) of the soil on the variation of overland flow were tested by analysing 2000 synthetic rainfall—runoff events, all generated from real, observed rainfall events but with runoff modelled by a two-dimensional distributed model using different spatially variable K _s fields in a small (12 ha) agricultural catchment. The purpose is to determine the influence of spatial variation in K _s on runoff generation. The statistical measures used to describe the variation in the generated K _s were its coefficient of variation and correlation length. Both of these had two levels of typical values obtained from field measurements in other studies. The storms were analysed at a general event level, first using simple graphical and statistical methods and then using analysis of variance (ANOVA). The observed scale of the spatial variation of K _s does cause statistically significant variation in overland flow. The graphical analysis showed that the first flow peak in a multi-event storm had the largest variation and that differences were greater in the rising part of the hydrograph than in its recession. The greatest variation in overland flow was produced by the combination of the greater coefficient of variation and the longer correlation lengths. The smallest variation in overland flow was produced by the combination of the smaller coefficient of variation and the shorter correlation lengths. ANOVA showed that the coefficient of variation and correlation length alone did not explain all the variation of the total flow. ANOVA was not very useful due to the many restrictive assumptions that were not satisfied by the nature of the data and therefore analysis methods with less restrictive assumptions need to be tested.     

单、双向振动条件下饱和粉砂变形特性对比试验研究

由于仪器水平的限制,关于土体的动力特性的研究目前多采用单向激振方式替代双向激振方式。而这两种激振方式在试验原理方面存在明显不同。很多研究表明,应力路径对土的响应有着不可忽视的影响,这两种方式相替代的合理性尚待证明。本文利用DSC2000多功能动三轴试验系统,选取尾矿砂分别在单向及双向振动条件下进行一系列饱和土的动力特性试验,对比两种激振方式作用下土体的滞回曲线以及骨干曲线的差异,分析土体在这两种振动方式下产生差异的原因,并应用双曲线模型对骨干曲线进行拟合,最后给出在进行土体变形特性试验时以单向激振方式替代双向激振方式的适用条件。     

饱和砂土地震液化判别的分形插值模型

借鉴分形基本理论,提出了基于分形插值模型的饱和砂土地震液化判别方法.该方法首先选取影响饱和砂土地震液化判别的7个主要因素,根据分类标准,采用在每级标准中随机内插的方法,得到40个标准样本,用于构建饱和砂土地震液化判别的分形插值模型;其次根据最大似然分类原则确定每个饱和砂土地震液化判别指标的评价分维数;然后利用加权求和法计算样本的综合评价值,并根据样本综合评价值与经验等级之间的关系建立分形插值评价模型;最后,进行了实例分析结果表明:该模型的评价结果合理、客观,计算得到的每个样本具体得分值,即使对属于同一级的样本也可以给出其地震液化程度的顺序,为饱和砂土地震液化评价工作提供了一种新的研究方法与思路.