复杂岛屿海域的台风浪局地特征模拟与分析——以舟山海域为例

为了研究舟山海域复杂地形条件下的台风浪特征,在高分辨数值模拟中采用了利用海图资料处理复杂岛屿地形分布的方法,利用WAVEWATCHⅢ和SWAN模式相嵌套模拟了影响该海域的西北行路径的典型台风浪过程.分析表明,舟山海域的东南部、东北部、西北部、内部海域受台风的影响各不相同,台风浪特征分布与海域的岛屿分布、水深分布等因素密...     

静力触探技术在东海陆架工程勘察中的应用研究

通过对东海大陆架海底浅表层土样的静力触探参数进行统计分析,得到该区域细砂、粘土、淤泥质土和淤泥的静力触探统计值,建立了研究海区基于静力触探参数的土类判别图,可用于快速判定土的类别.根据静力触探参数,并应用经验公式估算了海底粘性土的抗剪强度和灵敏度,对估算公式经验系数选择进行了深入研究,提出在研究海区应用经验公式进行粘性...     

土壤渗滤处理技术在海岛生活污水处理中的应用

土壤渗滤处理系统设备简单、投资少、操作管理方便、能耗低,净化效果良好,在处理海岛生活污水领域具有广阔的发展前景.根据鼓浪屿目前污水水质、水量的特点,采用土壤渗滤高度水处理技术对污水进行处理,污染物经过土壤的物理、化学和生物作用,出水达到《城市污水再生利用城市杂用水水质》(GB/T18920-2002),具有不产生污泥,运行简单,氮磷去除效率高,无二次污染等特点.     

深层水泥搅拌法在土体加固中的应用

介绍了在某护岸改造工程利用CDM加固体作为临时挡土墙的施工工艺。结果表明该工艺具有理想的效果,开创了CDM加固护岸坡脚土体的新工艺。     

SMAP卫星海表盐度产品的检验与校正

In this study, sea surface salinity(SSS) Level 3(L3) daily product derived from soil moisture active passive(SMAP)during the year 2016, was validated and compared with SSS daily products derived from soil Moisture and ocean salinity(SMOS) and in-situ measurements. Generally, the root mean square error(RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the sea surface temperature(SST). Then, a regression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.     

大直径钢管桩土塞效应的判断和沉桩过程分析

港口工程和海洋工程中出现了越来越多的大直径超长钢管桩。由于这种桩直径较大,土塞的形成对桩的可打入性和承载力有较大的影响。鉴于此,根据大直径和超大直径钢管桩土塞性状的特殊性,考虑了桩直径对侧壁摩阻力、端阻力的影响,引入了尺寸效应系数,重新建立了土塞微分体的静力平衡方程,提出了采用改进的静力平衡法进行土塞效应判断,同时采用波动方程法近似模拟土塞与桩管内壁的相互作用,建立了简化的土塞与桩壁相互作用模型,并用该方法进行实际工程的打桩分析,分析结果表明该方法对土塞效应的判断、打桩过程的预测等与工程实测数据吻合较好。     

土体疲劳对打桩分析的影响

在动力沉桩过程中,桩长时间连续运动导致桩侧土体强度的降低,使土体产生疲劳效应。结合一维应力波动理论,桩土相互作用模型和土体疲劳的不同计算方法,编制计算软件,对渤海某油田采油平台的桩基工程进行打桩分析,预测沉桩过程所需的锤击数、桩周土静阻力以及桩的极限承载力。比较不同的桩侧土体疲劳计算模式的分析结果,并用工程实测数据验证计算值。为工程设计和施工提供参考。     

Determination of trace and rare-earth elements in Chinese soil and clay reference materials by ICP-MS

Inductively coupled plasma mass spectrometry(ICP-MS) has become a powerful tool for providing reliable analytical results in many laboratories around the word. In this study, the mixture of HF and HNO3 acids in high-temperature and high-pressure closed-vessel digestion technique were used to decompose some Chinese reference materials, and thirty seven elements were determined by ICP-MS. Most of the results for Chinese soil reference materials were found to be in reasonable agreement with the reference values, except Cs, Ta, Li, Ge, Zn, Nd, Tb and Ta whose values need to be revised. Their precisions were typically lower than 5% RSD. However, the Precisions of Chinese clay reference materials, especially for GBW03102 and GBW03102a, were significantly different with reference values, probably reflecting the existence of a coarser-grained fraction(70 μm) in samples, and the formation of fluorides in Al-rich samples during sample decomposition by using the mixture of HF and HNO3 acids. Moreover, thirty-seven trace elements covering the mass range from Li to U in four Chinese clay reference materials were firstly provided with good precision and accuracy in this study.     

舟山冬季暴雨的特征

文章分析了冬季暴雨发生时的环流形势和物理量场分布特征,揭示了冬季暴雨的发生与厄尔尼诺现象有着一定的相关。同时,分析了单站要素的变化,为以后的冬季暴雨预报提供参考。     

The Working Mechanism and An Analytic Method of the Deep Embedded Large Cylinder Structure

The large cylinder is a new-type structure that has been applied to harbor and offshore engineering. An analytic method of the relationship between loads and the structure displacement is developed based on the failure mode of deep embedded large cylinder structures. It can be used to calculate directly the soil resistance and the ultirnate bearing capacity of the structure under usage. A new criterion of the large cylinder structure, which discriminates the deep embedded cylinder from the shallow embedded cylinder, is defined. Model tests prove that the proposed method is feasible for the analysis of deep embedded large cylinder structures.