鄂尔多斯盆地南部侏罗系油砂的发现与成藏模式

本次工作新发现的油砂矿藏位于陕西省铜川市庙湾地区。地层特征和孢粉组合分析表明含油砂地层为侏罗系。野外调查和钻探工作证实渭北隆起的北部单斜构造地表出露大量的侏罗系延安组和直罗组油砂,累计厚度可达29.85 m;钻井油砂累计厚度达11.89 m,最大单层厚度达7.9 m,埋深在70m以浅。油砂主要赋存于中下侏罗统延安组和直罗组河流相辫状河道沉积砂岩孔隙和裂隙之中。该油砂矿藏是在渭北隆起演化的基础上,经燕山晚期构造运动抬升形成,属于抬升运移型成藏模式。经初步资源量估算,研究区油砂油地质资源量为3 232.72万t。     

克拉玛依油田二厂八区套管破损机制研究

克拉玛依油田二厂八区井区经过长期开采出现了大量的套管破损问题。对套管破损位置进行总结归纳发现,套管破损主要存在于白垩系吐谷鲁群、侏罗系齐古组、二叠系乌尔禾组等地层中。对研究区连井进行地层对比、地震数据体进行波阻抗反演和砂体分析,发现研究区内白垩系吐谷鲁群和侏罗系齐古组的砂体十分发育,广泛存在于整套地层中。砂体中流体的渗流作用对套管的腐蚀为套管破损的主要因素。泥岩吸水蠕变膨胀、油层出砂和固井质量不合格为套管破损的其他因素。     

隐伏断层在强震砂土液化中的作用——以2008年汶川Mw 7.9地震为例

2008年汶川Mw7.9地震的强地面震动在龙门山前地区造成大量的砂土液化、喷砂冒水等地震灾害现象。震后野外调查发现,砂土液化点主要分布于地下水位只有几米深的山前河流的低阶地处,以大面积砾性土液化为特征,约58%的液化点位于距北川断层20~35km的范围内。对喷水高度及喷水过程进行了详细记录,喷水高度与峰值加速度并没有明显的相关性,喷水高度异常点(2m)集中于山前断裂系统近地表投影处。汶川地震中喷水高度异常、砾性土液化的位置与山前断裂系统的吻合性说明,沉积盆地内的地质构造可能在砂土液化强度和与震动相关的地震灾害方面起到促进作用,所以在类似的地质和水文环境中,除主震的断层错动外,应考虑地质构造在地震危险性评估和建筑物抗震设计中的重要作用。     

Effects of sand burial on growth and antioxidant enzyme activities of wheat (Triticum aestivum L.) in northern China

Growth and physiological responses of wheat to sand burial were studied in Horqin Sandy Land, to determine the impact on productivity and survival as well as antioxidant enzymes responses. This study c...     

Effects of sand burial on survival and growth of Artemisia halodendron and its physiological response

There is a great deal of literature on the effects of sand burial upon the survival and growth of desert plants, but the physiological adaption mechanisms of desert plants to sand burial have as yet ra...     

Influence of structural position on fracture networks in the Torridon Group,Achnashellach fold and thrust belt,NW Scotland

In fold-and-thrust belts rocks undergo deformation as fold geometries evolve. Deformation may be accommodated by brittle fracturing, which can vary depending on structural position. We use 2D forward modelling and 3D restorations to determine strain distributions throughout folds of the Achnashellach Culmination, Moine Thrust Belt, NW Scotland. Fracture data is taken from the Torridon Group; a thick, coarse grained fluviatile sandstone deposited during the Proterozoic. Modelling infers a correlation between strain and simple curvature; we use simple curvature to infer how structural position and strain control fracture attribute variations in a fold and thrust belt.In high curvature regions, such as forelimbs, fracture intensities are high and fractures are short and oriented parallel to fold hinges. In low curvature regions fractures have variable intensities and are longer. Fracture orientations in these regions are scattered and vary over short distances. These variations do not relate to strain; data suggests lithology may influence fracturing. The strain history of fold structures also influences fracturing; structures with longer deformation histories exhibit consistent fracture attributes due to moderate-high strain during folding, despite present day low curvature. This is in contrast to younger folds with similar curvatures but shorter deformation histories. We suggest in high strain regions fracturing is influenced by structural controls, whereas in low strain regions lithology becomes more important in influencing fracturing.     

Intrinsic versus extrinsic variability of analogue sand-box experiments – Insights from statistical analysis of repeated accretionary sand wedge experiments

Analogue models are not perfectly reproducible even under controlled boundary conditions which make their interpretation and application not always straight forward. As any scientific experiment they include some random component which can be influenced both by intrinsic (inherent processes) and extrinsic (boundary conditions, material properties) sources. In order to help in the assessment of analogue model results, we discriminate and quantify the intrinsic versus extrinsic variability of results from “sandbox” models of accretionary wedges that were repeated in a controlled environment. The extrinsic source of variability, i.e. the parameter varied is the nature of the décollement (material, friction and thickness). Experiment observables include geometric properties of the faults (lifetime, spacing, dip) as well as wedge geometry (height, slope, length).For each variable we calculated the coefficient of variance (CV) and quantified the variability as a symmetric distribution (Normal, Laplacian) or asymmetric distribution (Gamma) using a Chi squared test (χ²). Observables like fault dip/back thrust dip (CV = 0.6–0.7/0.2–0.6) are less variable and decrease in magnitude with decreasing basal friction. Variables that are time dependent like fault lifetime (CV = 0.19–0.56) and fault spacing (CV = 0.12 – 0.36) have a higher CV consequently affecting the variability of wedge slope (CV = 0.12–0.33). These observables also increase in magnitude with increasing basal friction. As the mechanical complexity of the evolving wedge increases over time so does the CV and asymmetry of the distribution. In addition, we confirm the repeatability of experiments using an ANOVA test. Through the statistical analysis of results from repeated experiments we present a tool to quantify variability and an alternative method to gaining better insights into the dynamic mechanics of deformation in analogue sand wedges.     

The Cosmolian program for simulating aeolian dynamics and its application to central Australia

The wide spatial coverage of sand dunes in continental interiors makes the understanding of their activity and accumulation history valuable for palaeoenvironmental reconstructions and the interpretation of landscape evolution. Nevertheless, the study of aeolian landscape development at the million-year timescale is hampered by the complex interaction of factors determining dune migration and the inherently self-destructive nature of their chronostratigraphy, thus limiting the applicability of traditional dating methods. This study presents a standalone program that simulates aeolian transport based on luminescence-derived chronologies coupled with numerical modelling of the accumulation of cosmogenic nuclides. This integrative approach to modelling the history of aeolian landforms reveals phases of emergence of aeolian sand into the landscape, and provides a data-based scheme that facilitates the morphodynamical study of aeolian processes over multiple timescales and up to several millions of years. The application of the program for reanalysing previously reported data from the Australian Simpson Desert reveals multiple pulses of sand dispersion into central Australia at 3.8–3.4, 2.9–2.5 and 1.5–1 Ma, corresponding to pronounced changes in climatic conditions and landscape deformation events. The synchronicity of the results with the established environmental framework that would promote the production and aeolian distribution of sand exemplifies the applicability of process-based modelling in constructing a timeframe of key landscape evolution events in arid environments by studying aeolian deposits. The dependence of the parameters used to determine environmental settings on sand transportation patterns additionally makes the program a powerful tool to further investigate the triggers and mechanisms of aeolian processes.     

Luminescence chronology of the inland sand dunes from SE India

Records of past climate changes have been preserved variously on the earth's surface. Sand dunes are one such prominent imprint, and it is suggested that their presence is an indicator of periods of transition from arid to less arid phases. We report inland sand dunes from Andhra Pradesh (SE India) spread over an area of ~ 500 km², ~ 75 km inland from the east coast. The dune sands are examined to understand their provenance, transportation, timing of sand aggradation and their relationship to past climates. The dune distribution, grain morphology and the grain-size studies on sands suggest an aeolian origin. Physiography of the study area, heavy mineral assemblage, and abundance of quartz in the parent rocks indicate that the dune sands are largely derived from first-order streams emanating from hills in the region and from weathering of the Nellore schist belt. It appears that the geomorphology and wind direction pattern both facilitated and restricted the dune aggradation and preservation to a limited area. OSL dating of 47 dune samples ranged from the present to ~ 50 ka, thereby suggesting a long duration of sand-dune aggradation and/or reworking history.     

Aeolian sediment transport and morphologic change on a managed and an unmanaged foredune

Sediment transport and short‐term morphologic change were evaluated at a site where sand fences are deployed and the beach is raked (Managed Site) and a site where these human adjustments are not practiced (Unmanaged Site). Data were gathered across the seaward portion of a low foredune when winds blew nearly shore‐normal at mean speeds 8.9 to 9.3 m s^‐1. Data from traps revealed sediment transport rates at unvegetated portions of the foredune crest (40.2 to 43.5 kg m^‐1 h^‐1) were greater than on the backshore (4.9 to 11.2 kg m^‐1 h^‐1) due to onshore decreases in surface moisture and speed‐up of the wind passing over the foredune. Data from erosion pins indicate sediment input to the dune was 1.48 m³ m^‐1 alongshore at the Managed Site and 1.25 m³ m^‐1 at the Unmanaged Site. The Unmanaged Site had deposition at the dune toe, erosion at mid‐slope, and deposition at the crest. Deposition occurred at mid‐slope on the Managed Site near a partially buried (0.58 m high) fence with a porosity of about 65%. Deposition at partially buried wrack on the upper backshore and dune toe at the Unmanaged Site was about twice as great as deposition in this zone at the Managed Site. Results indicate that: (1) the seaward slope of the foredune can be a more important source of sand to the lee of the crest than the beach; (2) wrack near the toe can decrease transport into the foredune; (3) a scour zone can occur on the foredune slope above the wrack line; (4) a fence placed in this location can promote deposition and offset scour, but fences can restrict delivery of sediment farther inland. Evaluation of alternative configurations of fences and strategies for managing wrack is required to better determine the ways that humans modify foredunes. Copyright © 2012 John Wiley & Sons, Ltd.