鄂尔多斯盆地北部塔巴庙地区与地层挠曲变形有关的构造裂缝分布定量预测

塔巴庙地区位于鄂尔多斯盆地北部伊陕斜坡构造带上,构造平缓,一般认为不具备裂缝发育条件.然而大量岩心观察、薄片分析、物性测试、测井及试井资料证实,研究区上古生界发育区域性分布的构造裂缝系统和与地层局部挠曲变形有关的局部构造裂缝系统.本文重点介绍与低幅度地层挠曲变形有关的裂缝预测方法,以及主要勘探层裂缝发育部位、发育程度和裂缝系统产状等成果.研究表明,地层挠曲变形主要发生于燕山期构造运动,喜马拉雅期对地层有一定改造作用.构造裂缝对致密储层储集性能作用意义不大,但对储层渗透率的改善作用明显.      

13C示踪技术在利玛原甲藻中腹泻性贝毒合成研究的应用

选取具有显著产毒差异的利玛原甲藻(Prorocentrum lima) SHG株与2XS株为研究对象,以2-¹³C-甘氨酸为示踪原料结合高分辨质谱方法,为腹泻性贝类毒素及其酯化态毒素合成与代谢途径的研究提供新方法和思路。结果表明,两株藻共发现16种腹泻性贝毒及其酯化态毒素成分。对照培养条件下SHG株(大田软海绵酸毒素含量为7.88 pg/cell,鳍藻毒素1含量为4.35 pg/cell)的产毒能力高于2XS株(大田软海绵酸毒素5.70pg/cell),而甘氨酸作为氮源培养条件可显著提高两株藻的产毒总量(P<0.05)。¹³C-甘氨酸标记组与甘氨酸培养组单细胞产毒量无显著变化(P>0.05)。腹泻性贝毒被标记后其同位素异构体丰度发生变化,其中酯化态受¹³C标记的影响程度更高,二级质谱图清晰表示出其碎片离子及脱水峰的标记情况。该方法直观阐明了甘氨酸可作为P. lima标记原料的产毒供体,并使用稳定同位素标记方法首次实现了酯化态的同步标记,有助于腹泻性贝毒生成机制的进一步研究。     

胜利海上油田分队计量研究

通过γ射线穿透油、气、水混合物后的透射和散射计数,经理论模拟计算,实现对原油含水率在线计量分析,测量含水率范围为３％－１００％,精度在２％以内。在实际应用过程中,运行稳定,易于操作,特别是修正了由于原油中含气地含水率测量带来的误差,技术和性能指标均已契过以往各种含水测量仪,通过应用,实现了海洋石油开发公司采油一、二分公司和油气集输大队的分队计量,使生产管理水平整体上了一个新台阶。     

东海西湖凹陷平北地区表层沉积物特征及其成因初探

对研究区域的３７０个站位,１０８４个样品进行了粒度分析,对其中的部分样品进行了重矿物、古生物的分析和鉴定,发现东海西湖凹陷平片地区表层改造砂的特征与一般的规律有较大的差别,这种独特的表层沉积物特征的形成原因主要和所处的地貌部位有关。     

沉积物孔隙毛细管压力与甲烷水合物饱和度关系研究

To better understand the relationship between the pore capillary pressure and hydrate saturation in sediments, a new method was proposed. First, the phase equilibria of methane hydrate in fine-grained silica sands were measured. As to the equilibrium data, the pore capillary pressure and saturation of methane hydrate were calculated. The results showed that the phase equilibria of methane hydrates in fine-grained silica sands changed due to the depressed activity of pore water caused by the surface group and negatively charged characteristic of silica particles as well as the capillary pressure in small pores together. The capillary pressure increased with the increase of methane hydrate saturation due to the decrease of the available pore space. However, the capillary-saturation relationship could not yet be described quantitatively because of the stochastic habit of hydrate growth.     

Stability Study of a Tide Embankment Subjected to Sea Level Variations Using Centrifugal Model Tests

To investigate the behavior of dredged-sea-sand fill compacted inside tide embankments with a damaged geosynthetic mat, centrifugal model tests and numerical simulation were conducted, both considering variations in sea level. The results from the three centrifugal model tests demonstrate that the subsidence of the dredged-sea-sand fill inside tide embankments with a damaged geosynthetic mat was strongly affected by the loss of dredged-sea-sand into the filter layers with large particles and a decrease in the bearing capacity of the filter layers with small particles. In addition, a comparison of the test and simulation results confirms that the loss of sand into the filter layer and the subsidence of the dredged-sea-sand fill were well reproduced by the numerical simulation.     

太湖风浪场的计算与比较

首先探讨了浅水风浪数值模型—SWAN模型应用于模拟内陆湖泊风浪生成和传播变形时的特点。该模型存在不能有效地模拟近固壁边界处风浪场的缺点,以能正确地模拟湖区的风浪场和节约计算时间为原则,确定了计算范围。对太湖进行了风场和风浪场的现场观测。分别利用规范公式和SWAN模型两种方法、根据观测和预报的风场计算了湖区的有效波高,并将计算结果和现场观测值进行了详细比较。结果表明基于观测的风场,利用两种方法所计算的太湖风浪场的精度基本相当;在根据观测的风场、利用SWAN模型计算内陆湖泊的风浪场时,需要精心选择恰当的风场;在根据预报的风场预报湖区风浪场时,SWAN模型的精度要高于规范公式的精度。     

基于物理特征的平面流场拓扑简化算法

基于网格合并思想实现的平面流场拓扑简化,存在物理特征被忽略和并行实现困难的问题,难以满足远程可视化的要求。文中提出1种基于物理特征的平面流场拓扑简化算法。算法通过计算生成平面流场的物理特征参数图像,利用图像分割提取平面流场的特征区域达到流场简化的目的。实验结果表明,算法能从物理特征和宏观的角度出发快速、准确描述平面流场的拓扑结构,为平面流场可视化提供了1种新方法。     

Mineralogical characteristics of polymetallic sulfides from the Deyin-1 hydrothermal field near 15°S,southern Mid-Atlantic Ridge

A seafloor hydrothermal field, named Deyin-1 later, near 15°S southern Mid-Atlantic Ridge(SMAR) was newly found during the 22 nd cruise carried out by the China Ocean Mineral Resources Research Development Association(COMRA). Sulfide samples were collected at three stations from the hydrothermal field during the26 th cruise in 2012. In this paper, mineralogical characteristics of the sulfides were analyzed with optical microscope, X-ray diffractometer, scanning electron microscope and electron microprobe to study the crystallization sequence of minerals and the process of hydrothermal mineralization. According to the difference of the ore-forming metal elements, the sulfide samples can be divided into three types:(1) the Ferich sulfide, which contains mainly pyrite and chalcopyrite;(2) the Fe-Cu-rich sulfide consisting predominantly of pyrite, chalcopyrite and isocubanite, with lesser amount of sphalerite, marmatite and pyrrhotine; and(3) the Fe-Zn-rich sulfide dominated by pyrite, sphalerite and marmatite, with variable amounts of chalcopyrite, isocubanite, pyrrhotine, marcasite, galena and gratonite. Mineral precipitations in these sulfides are in the sequence of chalcopyrite(isocubanite and possible coarse pyrite), fine pyrite,sphalerite(marmatite), galena, gratonite and then the minerals out of the dissolution. Two morphologically distinct generations(Py-I and Py-II) of pyrite are identified in each of the samples; inclusions of marmatite tend to exist in the coarse pyrite crystals(Py-I). Sphalerite in the Fe-Zn-rich sulfide is characterized by a"chalcopyrite disease" phenomenon. Mineral paragenetic relationships and a wide range of chemical compositions suggest that the environment of hydrothermal mineralization was largely changing. By comparison, the Fe-rich sulfide was formed in a relatively stable environment with a high temperature, but the conditions for the formation of the Fe-Cu-rich sulfide were variable. The Fe-Zn-rich sulfide was precipitated during the hydrothermal venting at relatively low temperature.     

秦皇岛A油田河流相储层展布特征

秦皇岛A油田位于渤海中部海域,区内油气藏主要发育在新近系的明化镇组。明化镇组下段为曲流河沉积地层,具有很强的非均质性,使得注水开发收效不均匀,平面矛盾突出。选取Ⅲ2砂体为研究对象,利用40余口钻井资料和覆盖油田的三维地震资料对储层内部结构和平面展布特征进行了系统的分析。研究认为,Ⅲ2砂体是由两期点坝砂体叠置而成,每一期砂体在平面上由4~5个单一点坝顺向组合而成,点坝之间的溢岸沉积是导致储层非均质性强的主要因素,控制了剩余油的分布。油田的生产动态证实,注入水流动规律与点坝砂体的平面展布具有良好的对应关系,部分井区水驱效果不均衡,个别单井产能低下都能从中找到原因。