Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

山溪性可冲性强潮河口曹娥江高水位初步研究

应用多年的实测资料 ,分析了曹娥江河口高水位成因 ,结果表明 ,曹娥江河口洪水位具有山溪性和可冲性的特点 ,人类活动对高水位有较大影响。应用统计分析法和成因分析法推求 1 %设计高水位 ,讨论了成因分析法中上、下边界条件的选取 ,其选取原则对其他潮汐河口确定设计高水位具有借鉴意义     

Investigation and sensitivity analysis of a mechanistic phytoplankton model implemented in a new modular numerical tool (Eco3M) dedicated to biogeochemical modelling

A new class of phytoplankton models with a mechanistic basis has been presented in a companion paper (Baklouti, M., Diaz, F., Pinazo, C., Faure, V., Queguiner, B., 2006. Investigation of mechanistic formulations depicting phytoplankton dynamics for models of marine pelagic ecosystems. Progress in Oceanography). It is the default class of models implemented in our new numerical tool Eco3M, which is dedicated to Ecological, Mechanistic and Modular Modelling. A brief overview of its main features is given in Section 2 of the present paper. In the next sections, a particular phytoplankton model among the aforementioned class has been tested with special emphasis on the mechanistic photosynthesis component relating the photosynthetic rate to the proportion of open photosystems II. The present study encompasses several essential steps that are inherent to any modelling, including model reduction, model sensitivity analysis and comparison of model outputs with experiments. The global sensitivity analysis of the plankton model for one-at-a-time parameter perturbations revealed a restricted set of parameters having major influence on the model outputs. Sensitivity tests involving simultaneous parameter perturbations within the range actually encountered in the literature provided a confidence interval for the outputs. Chemostat experiments performed on nitrate-limited diatoms grown under low (LL) and high-light (HL) conditions have been used for comparison with model outputs. The good fit between measured data and model outputs using the same parameter values in both the LL and HL cases demonstrates the ability of our model to represent the main features of phytoplankton dynamics including photoacclimation. Finally, Eco3M is ultimately intended to include explicit bacterial and zooplankton compartments, as well as to be coupled with ocean circulation models, but the intrinsic behavior of the phytoplankton model has been investigated first, independently of physical forcing.     

海浪日最大波高序列的一种标度性质

应用重标度分析方法研究小麦岛海洋观测站１９６１－１９８０年二十年海浪日最大波高序列时发现，该序列并不是相互独立的，而是具有记忆性和持久性，详细的论证表明分式布朗运动模型是描述海浪日最大波高序列的一个较好的模型，同时，应用分式布朗运动模型我们找到了存在于海浪日最大波高序列中的一种标度性质－累积离差（ｔ）的统计自仿射性。     

海上矿石运输最优船队的组建

针对海上矿石运输，介绍了一种完成定量任务并能使投资费用最少为目标的最优船队组建方法，同时对易变参数进行了灵敏度分析，使决策更加科学化     

Change of multifractal thermal characteristics in the western Philippine sea upper layer during internal wave-soliton propagation

The upper layer (above 140 m depth) temperature in the western Philippine Sea near Taiwan was sampled using a coastal monitoring buoy (CMB) with 15 attached thermistors during July 28–August 7, 2005. The data were collected every 10 min at 1, 3, 5, 10, 15, and 20 m using the CMB sensors, and every 15 sec at 15 different depths between 25 m and 140 m. Internal waves and solitons were identified from the time-depth plot of the temperature field. Without the internal waves and solitons, the power spectra, structure functions, and singular measures (representing the intermittency) of temperature field satisfy the power law with multi-scale characteristics at all depths. The internal waves do not change the basic characteristics of the multifractal structure. However, the internal solitons change the power exponent of the power spectra drastically, especially in the low wave number domain; they also break down the power law of the structure function and increase the intermittency parameter. The physical mechanisms causing these different effects need to be explored further.     

青岛局地风特征的分析

本文根据位于胶州湾东岸的青岛沧口和流亭两机场气象台和唠山区气象台资料及现场实验资料对胶州湾东岸的海陆风气候特征,来自胶州湾与来自南面黄海水域的两支海陆风相互作用及其对沧口地区的影响,崂山西坡下坡风的气候特征及影响进行了分析。文中还提出了一种根据常规气象观测资料估算海陆风发生频率的方法。     

中国沿海亚历山大藻(Alexandrium)核糖体rDNA部分序列分析及该藻属分子系统进化研究

分析了几株自南海及东海分离的亚历山大藻的rDNA部分序列信息,其中包括核糖体大亚基(LSU)rDNA的5′端D1-D2区序列,以及5.8SrDNA和ITS区序列;同时也对实验室保种的部分来自其它国家和地区的亚历山大藻相关序列进行了测序和分析,并以此作为序列分析中的参考。采用ClustalX及MEGA2软件对所得到的序列信息进行了综合分析与对比。结果表明,分离自南海的塔玛亚历山大藻(Alexandriumtamarense)和分离自东海的链状亚历山大藻(A.catenella),即便是在ITS区和LSUrDNA等高变区,其序列信息也完全一致。与基因库中搜索到的其它亚历山大藻rDNA序列信息相比较,中国沿海的塔玛/链状亚历山大藻序列更接近于塔玛复合种的“亚洲温带”基因型。对于分离自南海的另外两株未定种的亚历山大藻,通过对比序列信息,发现它们与相关亚历山大藻(A.affine)非常接近。分离于我国台湾地区的微小亚历山大藻(A.minutum)在序列上与分离自新西兰的藻株相似,而与分离自欧洲的微小亚历山大藻藻株相差较大。中国沿海亚历山大藻rDNA序列信息的获得为针对有毒藻种设计特异性核酸探针,发展灵敏快速的生物检测技术奠定了基础。