TRMM星载测雨雷达和地基雷达反射率因子数据的三维融合

TRMM卫星上的测雨雷达(TRMMPR)探测资料分布均匀且具有很高的垂直分辨率,但灵敏度较低;地基雷达(GR)水平分辨率较高且具有较高的灵敏度,但其垂直分辨率低。通过将TRMM PR与GR反射率因子数据的三维数据融合,得到了更优的反射率因子图像。测雨雷达与地基雷达三维数据融合主要分为以下几步:测雨雷达与地基雷达数据预处理——如去杂波、衰减校正;测雨雷达与地基雷达时空匹配;选取和应用合适的三维图像融合算法;对融合后的图像进行效果评估。试验结果表明:融合后的图像不仅增大了信息量,更好地检测弱降水,还提高了空间三维(3D)分辨率,能更好地反映降水区域细节,且使得数据总体上具有更高的完整性和可靠性。此外,还将基于雷达资料估测的降水数据与地面雨量计数据进行对比,估计反射率因子数据融合在降水测量上的有效性。      

Spatially explicit assessment of water embodied in European trade: A product-level multi-regional input-output analysis

Responsible water management in an era of globalised supply chains needs to consider both local and regional water balances and international trade. In this paper, we assess the water footprints of total final demand in the EU-27 at a very detailed product level and spatial scale—an important step towards informed water policy. We apply the multi-regional input-output (MRIO) model EXIOBASE, including water data, to track the distribution of water use along product supply chains within and across countries. This enables the first spatially-explicit MRIO analysis of water embodied in Europe’s external trade for almost 11,000 watersheds world-wide, tracing indirect (“virtual”) water consumption in one country back to those watersheds where the water was actually extracted. We show that the EU-27 indirectly imports large quantities of blue and green water via international trade of products, most notably processed crop products, and these imports far exceed the water used from domestic sources. The Indus, Danube and Mississippi watersheds are the largest individual contributors to the EU-27’s final water consumption, which causes large environmental impacts due to water scarcity in both the Indus and Mississippi watersheds. We conclude by sketching out policy options to ensure that sustainable water management within and outside European borders is not compromised by European consumption.     

江苏一次锢囚状MCS和相关中涡旋MCV的观测分析

利用常规地面和高空气象观测资料,结合气象卫星云图和雷达回波,分析了2009年6月14日15—23时(北京时,下同),造成江苏强对流天气的一个中尺度对流系统(MCS)的锢囚状特征的形成过程及其垂直结构。地面中尺度分析表明,雷暴高压东侧在飑前倒槽北端发展的闭合低压环流的东南气流将暖湿空气输送到冷性雷暴高压的北侧形成东南一西北向的暖舌,从而形成锢囚状的结构。长三角探空网资料的垂直结构分析表明,在对流层下部地面到850 hPa为冷性的雷暴高压,在对流层中部700 hPa为冷性的α中尺度涡旋(MCV),而500 hPa已转变为暖性的MCV。静力学关系可以说明MCV仅仅存在于700~500 hPa的原因和MCS下冷上暖的热力结构密切相关。     

风暴分类识别技术在人工防雹中的应用

利用新一代多普勒天气雷达资料,在风暴跟踪识别算法的基础上,发展了风暴分类技术,以提高人工防雹作业指挥的效率。首先以SCIT算法为基础,结合风暴的结构特征,综合利用雷达、探空资料,自动提取风暴结构特征指数;其次采用基于决策树模型的风暴自动分类技术,将风暴按强度分为雷雨云、单体风暴、多单体风暴和强风暴;最后根据风暴强度、高度和位置等属性,对有可能产生冰雹的单体,结合GIS,自动对下游方向或附近作业点进行预警或输出作业参数。通过对2006—2014年期间重庆、辽宁大连和河南三门峡三地发生的较为典型的31次冰雹天气过程、182站次冰雹样本的检验来看:该方法通过对风暴按强度、垂直结构等综合属性进行分类,能有效提高冰雹识别的命中率、降低空报率,其中强风暴的命中率能达到100%,空报率仅为11.4%。能有效提高人工防雹作业的自动化程度,对防雹作业的科学决策有着重要参考作用。     

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.     

一种多系统组合导航快速选星方法

采用多卫星导航系统组合导航,定位精度和系统可靠性会大幅提升,但导航定位运算量也会成倍增长。为解决多系统组合导航定位精度与实时性之间的矛盾,提出一种新的选星方法。新方法不追求最小GDOP值,而是以满足导航定位精度的GDOP值为前提,结合模糊理论中隶属函数的思想,按卫星在星座中均匀分布为原则进行选星。推导伪距测量的误差模型,分析了GDOP与测量误差之间的关系。北斗、GPS和GLONASS三系统组合导航选星实验结果表明,在不超过3次求解GDOP值的情况下,新方法能以不小于98%的概率得到GDOP≤4。     

支持向量机的车载雷达点云目标识别

为了进一步研究移动测量系统的数据处理问题,该文根据点云的基本特征,归纳了由7个特征构成的点云原始特征向量,在此基础上,结合语义环境构建了由17个特征构成的点云扩展特征向量,并采用支持向量机模型对车载LiDAR点云进行行道树点云识别的一系列实验。实验中采用粒子群优化算法和遗传算法对支持向量机进行参数寻优;采用不同特征向量和不同数目样本对点云进行学习和目标识别;分析了特征向量的学习曲线和识别精度。实验结果表明,支持向量机模型能够在行道树点云识别中取得较高的精度。     

时变参数灰色模型背景值重构及实现

针对时变参数灰色模型PGM(1,1)的背景值重构收敛速度及稳定性问题,该文运用积分的方法综合序列在Δt内不同变化趋势,导出背景值模型的准确表达式。实现了反映序列对新老信息偏爱程度的最优权值介于(0,1)内,且非不能越过某一阈值;给出了背景值重构模型最优解准确求取的具体算法步骤。基于MATLAB语言的实验结果表明:改进模型预测精度高,易于实现;所研究的带权灰色模型GM(1,n)背景值模型的重构及计算方法验证了PGM(1,1)模型重构及计算实现方法的有效性和实用性。     

Bacterially-mediated weathering of crystalline and amorphous Cu-slags

Two types of Cu-slags (CS: crystalline massive slag and GS: granulated amorphous slag) exhibiting a different chemical and mineral phase composition were compared with respect to their susceptibility to bacterial weathering using Pseudomonas aeruginosa (n° CIP 105094). Abiotic conditions e.g. sterile growth medium and ultrapure water were used for comparison. The experiments were extended up to 112 days with a systematic liquid phase renewal every 14 days. The results revealed significant release of elements in the bacterially mediated weathering experiments. Concentrations of elements (Si, Fe, Cu, Zn and Pb) in the biotic solutions were increased at least by 20% up to 99% compared to abiotic ones. From 3 to 77% of the leached elements were associated to the fraction >0.22 μm. Scanning electron microscope observations demonstrated greater weathering of mineral phases in biotic experiments than in abiotic ones which is in accordance with the solution chemistry exhibiting higher concentrations of elements leached in biotic set-ups. In the case of CS, glass and sulfides weathering was yet observed in abiotic experiment, whereas partial dissolution of fayalite (Fe₂SiO₄) was solely affected by the presence of bacteria. GS having a higher bulk content of metallic elements was found to be more stable than sulfide-bearing CS, while its (GS) glass matrix was found to weather easier under biotic conditions.     

A note on “Origin of components in Chilean thermal waters” by

Risacher et al. (2011) have presented voluminous data on thermal waters of Chile that is quite appreciable; however, their work still falls short on several counts. The most notable shortcoming of the work is the presentation and treatment of data. The interpretations are based on questionable premises (viz., extent of seawater intrusion) and considerations (viz., using average chemical composition of rock types for geochemical modeling, considering volcanic rocks as the only rock type in contact with the geothermal fluids) and assumptions not always substantiated by facts (with proper references) could have been corroborated. Use of Cl/Br ratio for discrimination purpose is unconvincing, considering the uncertainty in the measurement of low (<1 mg/L) Br concentration.