Multiple statistical approaches for the discrimination of mangrove species of Rhizophoraceae using transformed field and laboratory hyperspectral data

This study aims at discriminating eight mangrove species of Rhizophoraceae family of Indian east coast using field and laboratory spectra in spectral range (350–2500 nm). Parametric and non-parametric statistical analyses were applied on spectral data in four spectral modes: (i) reflectance (ii) continuum removed, (iii) additive inverse and (iv) continuum removed additive inverse. We introduced continuum removal of inverse spectra to utilize the advantage of continuum removal in reflectance region. Non-parametric test gave better separability than parametric test. Principal component analysis and stepwise discriminant analysis were applied for feature reduction and to identify optimal wavelengths for species discrimination. To quantify the separability, Jeffries–Matusita distance measure was derived. Green (550 nm), red edge (680–720 nm) and water absorption region (1470 and 1850 nm) were found to be optimal wavelengths for species discrimination. The continuum removal of additive inverse spectra gave better separability than the continuum removed spectra.     

Quantification of LST and CO2 levels using Landsat-8 thermal bands on urban environment

Land surface temperature (LST) is an important aspect in global to regional change studies, for control of climate change and balancing of high temperature. Urbanization is one of the influencing factors increasing land surface and atmospheric temperature, by the emission of greenhouse gases (e.g. CO₂, NO and methane). In the present study, LST was derived from Landsat-8 of multitemporal data sets to analyse the spatial structure of the urban thermal environment in relation to the urban surface characteristics and land use–land cover (LULC). LST is influenced by the greenhouse gases i.e. CO₂ plays an important role in increasing the earth’s surface temperature. In order to provide the evidence of influence of CO₂ on LST, the relationship between LST, air temperature and CO₂ was analysed. Landsat-8 satellite has two thermal bands, 10 and 11. These bands were used to accurately to calculate the temperature over the study area. Results showed that the strength of correlation between ground monitoring data and satellite data was high. Based on correlation values of each month April (R² = 0.994), May (R² = 0.297) and June (R² = 0.934), observed results show that band 10 was significantly correlating with air temperature. Relationship between LST and CO₂ levels were obtained from linear regression analysis. band 11 was correlating significantly with CO₂ values in each of the months April (R² = 0.217), May (R² = 0.914) and June, (R² = 0.934), because band 11 is closer to the 15-micron band of CO₂. From the results, it was observed that band 10 can be used for calculating air temperature and band 11 can be used for estimation of greenhouse gases.     

Application of Zn isotopes in environmental impact assessment of Zn–Pb metallurgical industries: A mini review

Zn and Pb smelters are the major contributors to Zn and Pb emissions among all anthropogenic sources, thus, it is essential to understand Zn isotopic variations within the context of metallurgical industries, as well as its fractionation in different environments impacted by smelting activities. This mini review outlines the current state of knowledge on Zn isotopic fractionation during the high-temperature roasting process in Zn and Pb refineries; δ⁶⁶Zn values variations in air emissions, slags and effluents from the smelters in comparison to the geogenic Zn isotopic signature of ores formation and weathering. In order to assess the environmental impact of these smelters, the available and measured δ⁶⁶Zn values are compiled for smelter impacted natural water bodies (groundwater, stream and river water), sediments (lake and reservoir) and soils (peat bog soil, inland soil). Finally, the discussion is extended to the fractionation induced during numerous physicochemical reactions and transformations, i.e. adsorption, precipitation as well as both inorganic and organic surface complexation.     

Late Oligocene–Early Miocene palaeoecology based on pollen data from the Kalkım-Gönen Basin (Northwest Turkey)

Radiometric and palynological data of the Upper Oligocene–Lower Miocene Soma Formation from the Kalk?m-Gönen Basin yield new results related to age and palynological contents. In this study, Upper Oligocene strata from the Dani?ment and Linfa areas and Lower Miocene strata from the Bengiler area were sampled palynologically and for radiometric dating. The Dani?ment assemblage, which is older than the Linfa assemblages, mainly contains coniferous and evergreen to deciduous mixed mesophytic forest elements. Relatively high quantities of the altitudinal plants Picea and Abies, indicate a cooler palaeoclimate. The Linfa associations mainly include coniferous and riparian elements. Pollen of the riparian plant Alnus and Taxodiaceae indicative for the swamp forest community was predominant, probably as a result of a high lake level. There is a hiatus during the Oligocene–Miocene transition, probably showing a non-depositional phase and sea-level fall indicating the Mi-1 glaciation event. Higher in the sequence, the Aquitanian Bengiler sediments include high amounts of coniferous forest elements as well as components indicative for the evergreen and deciduous mesophytic forest and also riparian forest and swamp forest. Due to presence of thermophilous taxa Reveesia, Mastixiaceae and Arecaceae, a warm and humid palaeoclimate is inferred according to quantitative analyses using the Coexistence Approach.     

A note on “Origin of components in Chilean thermal waters” by

Risacher et al. (2011) have presented voluminous data on thermal waters of Chile that is quite appreciable; however, their work still falls short on several counts. The most notable shortcoming of the work is the presentation and treatment of data. The interpretations are based on questionable premises (viz., extent of seawater intrusion) and considerations (viz., using average chemical composition of rock types for geochemical modeling, considering volcanic rocks as the only rock type in contact with the geothermal fluids) and assumptions not always substantiated by facts (with proper references) could have been corroborated. Use of Cl/Br ratio for discrimination purpose is unconvincing, considering the uncertainty in the measurement of low (<1 mg/L) Br concentration.     

Geochemistry of Paraná-Etendeka basalts from Misiones,Argentina: Some new insights into the petrogenesis of high-Ti continental flood basalts

The Early Cretaceous (∼135–131 Ma) Paraná-Etendeka continental flood basalts, preserved in bulk in the Paraná basin of southern Brazil and vicinity, have been divided into low-Ti and high-Ti types that govern the southern and northern halves of the basin, respectively. We have examined a new sample set from the southern margin of the northern high-Ti segment of Paraná basalts in Misiones, northeastern Argentina. These basalts are strongly to moderately enriched in TiO₂ (2–4 wt.%), have relatively high Ti/Y (300–500), low MgO (3.5–6.5 wt.%), and high Fe (FeO(tot) 12–14 wt.%) and belong to the Pitanga and Paranapanema magma types of Peate et al. (1992). Nd and Sr isotope compositions are quite unvarying with ε_Nd (at 133 Ma) values of −4.6 to −3.6 and initial ⁸⁷Sr/⁸⁶Sr of 0.7054–0.7059 and show no variation with fractionation. Compared to high-Ti lavas in the central and northern parts of the Paraná high-Ti basalt segment, the lavas from Misiones are similar to those in the northeastern magin of the basin but less radiogenic in initial Nd isotope composition than those in the central part. This variation probably reflects mixed EM1-EM2 source components in the sublithospheric mantle. A polybaric melt model of a sublithospheric mantle source at the garnet lherzolite-spinel lherzolite transition is compatible with the observed Ti budget of the Pitanga and Paranapanema lavas, regardless of the Nd isotope composition of their purported source.     

Bimodal magmatism of the Tucumã area,Carajás province: U-Pb geochronology,classification and processes

Geological mapping of the Tucumã area has enabled the identification of dike swarms intruded into an Archean basement. The disposition of these dikes is consistent with the well-defined NW-SE trending regional faults, and they can reach up to 20 km in length. They were divided into three main groups: (i) felsic dikes (70% of the dikes), composed exclusively of porphyritic rhyolite with euhedral phenocrysts of quartz and feldspars immersed in an aphyric felsite matrix; (ii) mafic dikes, with restricted occurrence, composed of basaltic andesite and subordinate basalt, with a mineralogical assembly consisting dominantly of plagioclase, clinopyroxene, orthopyroxene and olivine; and (iii) intermediate rocks, represented by andesite and dacite. Dacites are found in outcrops associated with felsic dikes, representing different degrees of hybridization or mixture of mafic and felsic magmas. This is evidenced by a large number of mafic enclaves in the felsic dikes and the frequent presence of embayment textures. SHRIMP U-Pb zircon dating of felsic dikes yielded an age of 1880.9 ± 3.3 Ma. The felsic dikes are peraluminous to slightly metaluminous and akin to A2, ferroan and reduced granites. The intermediate and mafic dikes are metaluminous and belong to the tholeiitic series. Geochemical modeling showed that mafic rocks evolved by pyroxene and plagioclase crystallization, while K-feldspar and biotite are the fractionate phases in felsic magma. A simple binary mixture model was used to determine the origin of intermediate rocks. It indicated that mixing 60% of rhyolite and 40% basaltic andesite melts could have generated the dacitic composition, while the andesite liquid could be produced by mixing of 60% and 40% basaltic andesite and rhyolite melts, respectively. The mixing of basaltic and andesitic magmas probably occurred during ascent and storage in the crust, where andesite dikes are likely produced by a more homogeneous mixture at high depths in the continental crust (mixing), while dacite dikes can be generated in the upper crust at a lower temperature, providing a less efficient mixing process (mingling). The affinities observed between the felsic to intermediate rocks of the Rio Maria and São Felix do Xingu areas and the bimodal magmatism of the Tucumã area reinforce the hypothesis that in the Paleoproterozoic the Carajás province was affected by processes involving thermal perturbations in the upper mantle, mafic underplating, and associated crustal extension or transtension. The 1.88 Ga fissure-controlled A-type magmatism of the Tucumã area was emplaced ∼1.0 to ∼0.65 Ga after stabilization of the Archean crust. Its origin is not related to subduction processes but to the disruption of the supercontinent at the end of the Paleoproterozoic.     

Distribution and relative density of cetaceans in the Hauraki Gulf,New Zealand

Understanding species distributions, and how they change in space and time, is vital when prioritising conservation or management initiatives. We assessed the distribution and density patterns of common dolphins (Delphinus sp.), bottlenose dolphins (Tursiops truncatus) and Bryde’s whales (Balaenoptera edeni) in the Hauraki Gulf, New Zealand. Dedicated boat-based surveys were conducted in the inner Hauraki Gulf (IHG) and off Great Barrier Island (GBI) during 2010–2012. Generalised linear models were used to investigate temporal changes in relative densities and kernel density estimation was implemented to examine spatial trends. Common dolphins were widely distributed during all seasons, with higher densities observed during winter and spring in the IHG but during autumn off GBI. There was inter-annual variation in Bryde’s whale distribution, with high densities recorded off GBI in 2011. Bottlenose dolphins were infrequently sighted in the IHG but regularly encountered off GBI, with the highest densities during spring and summer.     

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

Experimental and theoretical study of a cylindrical oscillating water column device with a quadratic power take-off model

The wave power extraction by a cylindrical oscillating water column (OWC) device with a quadratic power take-off (PTO) model was studied experimentally and theoretically. In the experiment, a scaled model OWC was tested in a wave flume, with an orifice being used to simulate a quadratic PTO mechanism. In the theoretical analysis, the quadratic PTO model was linearized based on Lorenz's principle of equivalent work, which allows us to perform a frequency domain analysis using an eigen-function matching method. The effects of higher harmonic components and the spatial non-uniformity of the surface velocity inside the chamber were discussed. A semi-analytical model was proposed to understand the viscous loss affecting the measured capture length. Our treatment of the quadratic PTO model was validated by comparing quasi-linear theoretical capture length and the laboratory measurement. Our results also showed that the effects of spatial non-uniformity and viscous loss could be noticeable for shorter waves.