雨滴尺度谱谱参数和形状因子的分析

作者计算了３次降不过程的雨滴尺度谱参数，并进行Ｍ－Ｐ分布拟合和Г分布拟合。同时还计算了雨滴谱形状因子Ｓ（Ｚ，Ｒ），分析了形状因子与雨强之间的关系。     

线性综合模型用于崩滑体变形预报的研究

综合分析和比较了自回归模型和回归模型的特点,提出了采用线性综合模型来预报崩滑体变形的思想,以弥补自回归模型或回归模型预报的不足。实测资料的处理结果表明,综合线性模型具有特别的适用性。     

平推式滑坡运动距离计算模型

平推式滑坡是四川盆地红层地区和三峡库区普遍存在的一类十分特殊的滑坡。多发育于近水平砂、泥岩互层的斜坡中,岩层倾角一般仅3°～5°,最陡者也不超过10°。基于平推式滑坡的地质力学模型及运动过程分析,利用能量守恒的原理推导了平推式滑坡运动距离的理论计算公式。进行了3组物理模型模拟试验,第Ⅰ组试验模拟滑坡后部裂缝在不同宽度及水头高度作用下滑坡体的运动距离,对推导的理论公式进行校验。通过对比分析认为,平推式滑坡前缘剪出口地下水排泄状态呈少量点状排泄时,滑坡基底扬压力分布形态整体上与矩形更加接近。为了进一步校验理论公式,进行了第Ⅱ组、第Ⅲ组试验,每组分别固定初始水头高度和初始裂缝宽度,模型设置了前缘整体渗水和完全堵塞两种情况。物理模拟试验验证了理论公式的可靠性和适用性。将理论公式应用于狮子山滑坡运动距离的计算,应用结果表明计算公式适用性良好。研究成果对平推式滑坡防治具有一定的指导意义。     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

浅议塔河地区“东河砂岩”三角洲沉积

近年来在塔河地区钻揭了一套典型的河控三角洲相“东河砂岩”,它与东河塘、塔中和哈得逊等地区发现的前滨相和滨面相“东河砂岩”明显不同.钻井岩心上该套三角洲相砂岩表现为板状交错层理、平行层理厚砂体;粒度概率具有河道、河口坝微相特征;平面上地震振幅、反射强度斜率属性异常呈以S99、T728井为中心的“鸟足状”外形;古盐度测试结...     

AlexNet支持下的地图建筑物形状分类方法

地图目标的形状在地图制图综合、空间查询等研究中发挥着重要作用。地图建筑物形状的识别与分类作为建筑物轮廓化简与典型化的基础,一直是制图综合研究的热点问题。目前,主要的建筑物形状识别方法主要依赖对建筑物轮廓的描述,对建筑物等地图面状要素的形态特征有较强的依赖性,通常只在应对特定类型的规则轮廓或直角化轮廓时能发挥较好的效果,对于形状不规则或复杂的情况识别不佳。本文提出一种AlexNet支持下的地图建筑物形状分类方法,将矢量地图中建筑物数据的形状分类问题,转化为建筑物栅格图像的分类问题,通过完成卷积神经网络的图形分类实现建筑物的形状识别。该方法首先结合空间认知规律提出一系列典型建筑物形状类型,然后利用矢量-栅格转换的方法从OSM数据采样单体建筑物栅格图像,通过人工标识获得建筑物形状分类训练样本,训练AlexNet卷积神经网络分类模型,最后利用训练好的模型对大比例尺建筑物数据进行智能形状分类与识别。本文利用北京、香港2个城市的OSM建筑物数据作为样本训练建筑物形状分类模型,并在广州部分城区的OSM建筑物数据上进行验证。相较传统形状相似性度量方法,本文提出的方法对实验区建筑物的识别分类总体查全率提...     

Shape Similarity measures of Linear Entities

The essential of feature matching technology lies in how to measure the similarity of spatial entities.Among all the possible similarity measures,the shape similarity measure is one of the most important measures because it is easy to collect the necessary parameters and it is also well matched with the human intuition.In this paper a new shape similarity measure of linear entities based on the differences of direction change along each line is presented and its effectiveness is illustrated.     

A three dimensional model of muckpile formation and grade boundary movement in open pit blasting

Summary Formulation and case studies of a three dimensional kinematic model are presented. Thein situ overburden geometry can be simulated accurately and various initiation patterns of blasts can be modelled. The overburden geometry, hole patterns and explosive distribution are all explicit model inputs. Because the effect of explosive properties, rock mass condition and inter-row delay are very difficult to measure in terms of blast performance, these are represented in the model by control parameters which are left for calibration using field data. The output of the model is a three dimensional muckpile shape of any cross section and a contour map of grade distribution within the muckpile. Two case studies are presented which have shown that the model is a valuable tool for optimizing production blasting as well as for controlling grade dilution during blasting.     

Shaking‐table tests on reinforced concrete frames with different isolation systems

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.