Experimental investigation of the elastic modulus of a fractal system—A model of fractured rocks

The elastic properties of a physical model representing a damaged rock matrix were studied using a square lattice deformed under tensile stress. The elastic modulusM of such a system varies in agreement with percolation theory as|x–x _c | ^f , wherex is the damage parameter andx _c the threshold value of the damage parameter,f3.6. Atxx _c the scale dependence ofM can be expressed asML ^–f/v , whereL is the size of the sample andv the correlation exponent in percolation theory.The experimental results are of interest in assessing elastic properties in earthquake focal zones and fault zones in general.     

Na depletion in modern adakites via melt / rock reaction within the sub-arc mantle

Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na₂O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na₂O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na₂O, SiO₂ and perhaps K₂O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.     

Temporal behavior of the background seismicity rate in central Japan, 1998 to mid-2003

We studied the temporal behavior of the background shallow seismicity rate in 700 circular areas across inland Japan. To search for and test the significance of the possible rate changes in background seismicity, we developed an efficient computational method that applies the space–time ETAS model proposed by Ogata in 1998 to the areas. Also, we conducted Monte Carlo tests using a simulated catalog to validate the model we applied. Our first finding was that the activation anomalies were found so frequently that the constant background seismicity hypothesis may not be appropriate and/or the triggered event model with constraints on the parameters may not adequately describe the observed seismicity. However, quiescence occasionally occurs merely by chance. Another outcome of our study was that we could automatically find several anomalous background seismicity rate changes associated with the occurrence of large earthquakes. Very significant seismic activation was found before the M6.1 Mt. Iwate earthquake of 1998. Also, possible seismic quiescence was found in an area 150 km southwest of the focal region of the M7.3 Western Tottori earthquake of 2000. The seismicity rate in the area recovered after the mainshock.     

冲击凿岩钎杆的瞬态动力学分析

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。     

PDC钻头切削齿破岩载荷规律的分析

对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系(不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差)来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。     

爆破夯实技术在水下地基处理中的应用

以某杂货码头和集装箱重力式码头水下地基处理工程为例，介绍了其地基处理的爆夯试验过程，得出了一次性爆破夯实厚层块石抛石基床的爆夯参数，并对其施工过程进行了监测。总结了类似工程施工的经验与教训。     

我国入境旅游和经济增长关系分析

文章分析了入境旅游发展的区域差异，并用Granger因果检验来考察入境旅游和各区域经济增长之间是否存在相应的因果关系，Granger因果检验的结果表明在东部地区，入境旅游和经济增长存在单向因果关系。东部地区的入境旅游对区域的经济增长产生显著影响。但是全国和中西部地区的入境旅游与经济增长之间不存在显著的因果关系。类似地，东部地区入境旅游增长是其第三产业增长的Granger原因。但是全国和中西部地区的入境旅游和相应区域第三产业的增长并不存在显著的因果关系。在区域层面上。只有少数区域支持入境旅游是区域GDP增长的Granger原因，它们是东部地区的北京、广东、上海、天津、福建、江苏、浙江、海南和广西；中部地区的黑龙江和湖南以及西部地区的云南和陕西。在这些省区市。入境旅游对区域经济增长产生显著的影响。但总体而言，入境旅游在我国还没有足够的发展。     

近几十年我国极端气温变化特征分区方法探讨

采用聚类统计检验分析和旋转主分量分析相结合确定中心站的方法,利用我国多年极端气温资料,对我国最高和最低气温年际变化型态进行区划。结果表明,这两种方法结合可以互相补充,使分区结果更具客观性。中国极端高温和极端低温年际变化分别可划为12和11个不同类型的区域,分别计算了各区域第一主成分的方差贡献率以及各区域之间的两两相关系数,检验证明分区是合理的。     

双坡面临空岩质边坡滑动破坏模式下的稳定性分析

多数岩质边坡稳定性分析已基本解决了常走向单坡面临空的边坡平面滑动问题。然而,在路堑边坡工程和自然边坡中有很多边坡坡面并不是平面,它包含多个坡面。多坡面边坡包含两个或多个不同走向的坡面。多坡面边坡几何特征不同于单坡面边坡,所以滑动条件也不一样。在赤平投影图上,多坡面的滑动包络线是组成边坡的每个坡面单独投影包络线的组合。为了探讨方便,只讨论了双坡面临空岩质边坡的滑动破坏模式,并将其分为双坡面临空下的平面破坏和楔形体破坏。在赤平投影图上,双坡面滑动区域定义为双坡面边坡滑动包络图中两侧坡面的真倾线之间的面积。如果有一两个节理面真倾向线落在滑动区内,滑动破坏才可能发生。     

Attenuation of aqueous metal transport at two natural acid rock drainage occurrences in the Yukon Territory, Canada

Naturally acidic drainage associated with pyritic black shale has been observed in many locations in the Yukon Territory. While not necessarily linked to known mineral deposits, most of these natural acid rock drainage occurrences show elevated dissolved concentrations of trace elements, especially zinc, nickel, copper, cadmium and arsenic. Based on field observations, microbial investigation, chemical analyses and geochemical modeling, the fate and transport of potentially deleterious elements at two natural acid drainage occurrences with slightly different settings are examined. The Macintosh Creek is a small, acidic stream （pH 2.98-3.40）, 2 km long, located in the Macmillan Pass area of east-central Yukon amidst known sedimentary exhalative massive sulfide mineralization but remains undisturbed by exploration activities. Its trace metal content is apparently derived from groundwater discharges, which gave as much as 5.0, 2.5, 0.7, 0.13 and 0.03 mg/L ofZn, Ni, Cu and As, respectively. Interaction and sorption reactions with algal mats, biofilms and iron oxyhydroxides appear to be the dominant mechanisms attenuating aqueous contaminant transport along the stream. Cryogenic precipitation further consolidates the ferricrete formation and reduces the mobility of the sorbed metals. The tributaries of the Engineering Creek along the Dempster Highway in northern Yukon drain through a series of dolomite, phyllite, argillite, limestone, black shale, sandstone and conglomerate with no known concentration of mineralization. In this area, the water chemistry fully reflects the local geology with acidic streams invariably associated with black shale occurrences. Groundwater seeps in the headwaters area of the km-180 Creek completely enclosed in black shale gave pH 3.0 and as much as 148, 39, 2.9 and 9.1 mg/L of Zn, Ni, Cu and As, respectively. Sorption with iron oxyhydroxide and organic matter appear to dominate the attenuation of contaminant transport along the stream. However, once entered into carbonate-dominated terrains, secondary carbonate minerals exercise additional geochemical control on the local water chemistry as a result of neutralization.