温杖子金矿成因类型与成矿模式

温杖子金矿的形成经历了长期的成矿作用和多次矿化富集,具叠加成因特点,主要成因类型为侵入体接触带型和中低温热液型。成矿作用从晚侏罗世开始,一直持续到第三纪末,约延续了150Ma。     

层序和体系域的有机相构成及其研究意义

层序地层学为沉积盆地的充填史分析和储层预测提供了有效的格架，但其在源岩评价和预测中的意义未能引起充分的重视。本文对莺海、琼东甫盆地的各沉积层序进行了有机相分析，发现（１）浅水型沉积层序中各体系域的机相构成基本相同，且有机相的侧向变化不明显；（２）在深水型层序中，海进体系域上部和高位体系域下部有机质丰度较高、类型较好，有机相层序呈Ｓ性，但有机的侧向变化明显；（３）多层序有机相的总体演化趋势反映了盆地     

岩体损伤力学研究进展

论述了岩体损伤力学在岩体力学中的地位，并从细观和宏观两个方面系统介绍了其最新研究进展；对岩体损伤力学研究中的几个重要问题提出了见解，认为分形几何是研究损伤的有效手段。     

鲜水河断裂带大震复发机制和时空分布原因

岩石接触面在高温高围压下经过几天便烧结起来而有很高但低于原岩的剪切强度。烧结面与主压应力方向夹角大于55—65°时,便不再断裂而沿其它方向剪断。实验最低温压相当地壳10km深,这应是地壳大断裂的上部裂面与下部烧结层的界限深度,受力后便向下延裂,在下部形成震源。这可能是鲜水河断裂带震源在10—25km深重复发生的原因。由带内大震机制解P轴方向与地球自转速率变化趋势的关系、区域残余应力场水平主压应力分布方向与断裂带走向的关系,讨论了带内大震活动时段的原因。由带内裂面烧结条件、残余和现今应力高值区、岩体低强度区及储存弹性应变能高值区的分布,研究了带内大震空间分布原因。     

Surface conductivity in rocks: a review

Electrical properties of rocks depend on composition (i.e. bulk properties of the constituents), micro structure (i.e. geometrical arrangement of the constituents) and interfacial effects. We consider here a rock as a three component system — grains, pores, and interfaces — in order to account for the observed behaviour. We review first the main results relative to DC. conductivity. Surface conductivity effects show up clearly in the case of shaly formations or at low salinities. Although Archies' law (1942) and Waxman and Smits model (1968) are widely used, a more physically based model is that of Johnson and Sen (1988). We review also the variable frequency conductivity (complex conductivity) data and models. The important effect in that case is the enhancement of the dielectric constant at low frequencies (Knight and Nur, 1987) which can be interpreted as a geometrical effect although electrochemical interactions may also play an important role at low frequencies, depending on the rock type.     

花岗质次火山岩的成因类型及成矿专属性

与花岗质火山岩具不同的成因类型相似,自然界也存在着不同成因类型的次火山岩。后者与三大成因类型花岗岩相对应,亦可分为壳型次火山岩,过渡型次火山岩和幔型次火山岩三类。亮型次火山岩主要与U、REE,W、Sn、Nb、Ta等矿产有关系,属花岗岩矿床系列。过渡型次火山岩主要与Cu、Pb、Zn、Ag、Au有关,并伴有W、Sn成矿、属斑岩矿床系列。幔型次火山岩主要与黄铁矿型Cu、Pb、Zn多金属矿化有关,属海相火山岩矿床系列。     

我国北方前寒武区域变质岩区变质作用对镁铁云母成分的影响

辽宁鞍山、冀东、密云和内蒙古地区镁铁云母的寄主岩石类型有变沉积岩和变火山岩。其镁铁云母的Al_2O_3含量和Mg/(Mg+Fe~(2+))比值随寄主岩石类型不同而有明显的差异。而在同类寄主岩石中,镁铁云母的成分,特别是Mg/(Mg+Fe~(2+))比值,则随变质作用强度而出现规律性的变化。 研究表明,从鞍山-冀东-密云、内蒙古、变质作用强度(主要是温度)升高;在翼东水厂矿区,从南至北,变质作用强度也有增加的趋势。镁铁云母成分可为变质岩区的地层对比、确定构造形迹和找矿提供有益的信息。     

An analytical method for determining shear stiffness of an inclined grouted bolt installed across an open discontinuity

Summary The shear stiffness of a grouted, rock bolt intersecting a discontinuity controls the amount of shear movement that can occur for a given shear force. In this paper an analytical model is developed for estimating the shear stiffness of a single bolt as a function of bolt inclination, hole and bolt diameter, bolt, grout and rock Young's moduli, and aperture (opening) across the discontinuity, and sensitivity studies conducted to determine the most significant of these variables as predicted by the model.     

The stability of underground workings in the soft rocks of the Coal Measures

Summary The characteristics of soft rocks typical of the British Coal Measures are defined and a series of working hypotheses are developed to provide improved design methods for underground roadway and face supports and pillars in coal mines. Proposed design equations are tested against case history data.     

西藏易贡崩塌——滑坡—泥石流的地质地貌与运动学特征

2000年4月9日19时59分18.2秒,在西藏自治区波密县境内易贡乡发生了特大崩塌—滑坡—泥石流。构造上它发生在印度板块阿萨姆楔入角复合地带的西侧,也是高原腹地向东侧山地下降的过渡带,重力作用明显。根据便携式GPS定位仪实地测定和滑坡前后的卫星影像分析,崩塌—滑坡—泥石流堆积物形成了一座长约5.7km、宽约1.5km的“天然大坝”,完全堵塞了易贡藏布河干流,崩塌滑坡体总方量超过3.8×10~8m~3。根据区域地震台网的记录,其振动持续的时间为6min,其中最大振幅的持续时间为2min。震相分析表明有3组较为明显的震相,对应着3次较大的地表振动。计算获得崩塌滚落的平均速度约为48m/s,伴随崩塌滚落的同时,滑坡泥石流的平均滑动速度也达到了16 m/s,比一般泥石流流动速度要大一倍。