北祁连中西段与超基性岩有关的金矿化特征及成因探讨

北祁连中西段发育三套早古生代蛇绿岩及相应的基性、超基性岩,呈北、中、南三条带状分布。区内金的活化、迁移主要受控于超基性岩带和与其分布近于一致的两条韧性剪切带,金矿化主要发生在强蚀变超基性岩体内、岩体与围岩接触带、断裂破碎蚀变带内。根据包裹体测温及成分测定、稳定同位素特征资料及超基性岩中金丰度值等分析,金矿物质主要来自超基性岩,流体来源于深部,其成因属与超基性岩有关的韧性剪切带型金矿床。     

Microplane constitutive model for porous isotropic rocks

The paper deals with constitutive modelling of contiguous rock located between rock joints. A fully explicit kinematically constrained microplane‐type constitutive model for hardening and softening non‐linear triaxial behaviour of isotropic porous rock is developed. The microplane framework, in which the constitutive relation is expressed in terms of stress and strain vectors rather than tensors, makes it possible to model various microstructural physical mechanisms associated with oriented internal surfaces, such as cracking, slip, friction and splitting of a particular orientation. Formulation of the constitutive relation is facilitated by the fact that it is decoupled from the tensorial invariance restrictions, which are satisfied automatically. In its basic features, the present model is similar to the recently developed microplane model M4 for concrete, but there are significant improvements and modifications. They include a realistic simulation of (1) the effects of pore collapse on the volume changes during triaxial loading and on the reduction of frictional strength, (2) recovery of frictional strength during shearing, and (3) the shear‐enhanced compaction in triaxial tests, manifested by a deviation from the hydrostatic stress–strain curve. The model is calibrated by optimal fitting of extensive triaxial test data for Salem limestone, and good fits are demonstrated. Although these data do not cover the entire range of behaviour, credence in broad capabilities of the model is lend by its similarity to model M4 for concrete—an artificial rock. The model is intended for large explicit finite‐element programs. Copyright © 2002 John Wiley & Sons, Ltd.     

广西岩石可钻性分级研究初探

岩石可钻性的合理分级,是正确选择钻进方法、技术参数、钻头类型和制定合理的生产与物化定额、专核钻探生产技术与经济指标的科学依据。利用与岩石可钻性密切相关的物理力学性质—压入、摆球硬度、研磨性、塑性系统与声学特性为自变量,以微钻钻速为因变量,在计算机上进行一元和多元回归分析,建立其数学模型,以此将不同岩石划分为12级。这种方法具有较强的模拟性、代表性和较大的适用范围。     

Experimental and numerical investigations of stresses in a fully grouted rock bolts

Rock bolts are widely used for rock reinforcement in hard-rock mining and civil engineering since a long time. However the use of fully grouted rock bolts and cable bolts is limited in coal mines. In order to improve performance of the rock bolts as a supplementary roof support system for any type of roof condition in coal measured formations, it is necessary to have a good understanding of the behavior of the bolt–grout and grout–rock interactions as well as the mechanism of load transfer in rock bolts.As the performance of grouted bolts depends on bond strength, extensive laboratory pullout as well as pushout tests were conducted in the present investigations with the variations in the bolt diameters, length and cement–water mixing ratios of grout. The load–displacement curves were developed and were verified with the numerical results obtained from finite element analysis using ALGOR software.Numerical models were validated for pushout tests and a detailed analysis was carried out to know the displacement, stress, strain distribution along the bolt.     

辽南北瓦沟长英质岩石应变组构演化

岩石的应变组构型式与岩石成分、变形环境和应变过程有着密切关系。北瓦沟地区低角闪岩相条作下的长英质岩石,表现脆性、韧性和韧脆性过渡,因而在剪切作用过程中形成了相应的应变组构型式,即脆性应变组构、韧性应变组构和脆-韧性应变组构。而且随着应变过程的发展,应变组构也表现出一定的演化规律。     

建平地区三座庙序列侵入岩侵位机制讨论

通过野外对三座庙序列侵入岩的岩体平面与剖面形态、岩体的内部构造、岩石与围岩的构造型式、接触带的度形特征等宏观地质特征的研究,推测岩体侵入位机制为强力挤入方式定位,即气球膨张式。笔者运用岩石的有限应变测量原理和方法,结合岩组分析及流变学、现代变形理论,对三座庙序列的侵入岩岩石做了有限应变测量和岩组分析工作,所得定量资料为确定岩体的浸位机制提供了理论依据。三种岩石有限应变测量,即:算术平均法、长短轴法、Rf/φ曲线法的富林指数k值均在0相似文献   

锦屏电站坝厂区卸荷岩体力学参数研究

选择具有代表性的区块,根据结构面的性状和规模拟定模型层次和尺寸,建立岩体数值仿真模型,通过计算机数值仿真,采用卸荷非线性力学理论对锦屏电站坝厂区岩体进行卸荷岩体宏观力学特性及参数的数值分析;同时,用RMR法和BP神经网络法对岩体宏观力学特性及参数进行分析,综合确定岩体力学参数,为设计部门提供设计参考依据.     

REE Characteristics of the Kalatongke Cu-Ni Deposit, Xinjiang, China

On the basis of the study on the REE geochemistry of the ore minerals and host rocks of the Kalatongke Cu-Ni deposit, Xinjiang, it is indicated that the major ore minerals, sulfides, were sourced from the host mafic-ultramafic magma. Characterized by low REE content of sulfide, such a Cu-Ni sulfide deposit occurring in the orogen is obviously different from that on the margin of the craton. Because the mafic-ultramafic rocks from the Cu-Ni sulfide deposit occurring in the orogen is water-rich and the REEs of some sulfides show a particular "multiple-bending" pattern, which suggests coexistence of multiple liquid phases (fluid and melt), the sulfide melt possibly contains a great deal of hydrothermal fluids and increasingly developed gases and liquid-rich ore-forming fluids after the main metallogenic epoch (magmatic segregation stage).