地下工程围岩分类模糊推理系统设计

将现场获取的影响地下工程围岩分类的几种主要因素视为判别围岩类别论域上的模糊子集,利用建立的地下工程围岩分类模糊逻辑推理系统对围岩类别进行模糊逻辑推理运算,获得与实际情况相一致的围岩类别的判定,直接为地下工程的信息化设计和施工提供依据。     

多种类植被覆盖地区ASTER影像岩石、土壤信息提取方法研究

植被的发育限制了遥感在地质学方面的应用,特别是在多种类植被发育地区不能直接地根据波谱特征进行岩石与矿物方面的填图.利用线性波谱分离等技术方法可以从植被、基岩或土壤混合信息中区分出多类别植被波谱,从像元混合光谱中减去各植被类型所占的像元光谱强度,从而可以求出土壤光谱强度及其所占的份额,有效剥离出岩石和土壤信息.在试验区利用多种类植被干扰消除方法,进行遥感蚀变矿物和岩石填图,具有极大的可靠性.该技术可以在中等植被发育地区的遥感填图中得以推广和应用.     

流变学:构造地质学和地球动力学的支柱学科

地球是一动态系统,其各层圈的构造运动归根到底就是多矿物复合岩石在各种物理条件(例如,温度、围压、差应力、应变速率、应变方式等)下和化学环境(例如,氧逸度和水含量)中的形变。流变学作为研究岩石力学性质和变形行为的科学,现已成为地球动力学和构造地质学的支柱学科。本文对国际上近年来岩石流变学的最新进展做些扼要的介绍,呼吁中国固体地学界加强流变学的研究,做出经得起时间淘洗、实践检验的原创性成果来,使中国的构造地质学研究迈进国际先进的行列。     

MODULATION OF ATMOSPHERIC THERMAL AND MECHANICAL FORCINGS AND NUMERICAL MODELING OF MEAN MERIDIONAL CIRCULATION

Upon investigating the relative locations of internal and external forcing and the resultant mean meridional circulation,it was found that thermal forcing and mechanical forcing for the formation of atmospheric mean meridional circulation are modulated by a certain ratio.This ratio is determined by the inherent baroclinity,static stability and absolute vorticity of the atmosphere.By employing a parameterization scheme for radiative heating and condensation heating,together with the analysisdata of the European Center for Medium-range Weather Forecasts,the mean meridional circulation for January wassimulated numerically.It was found that latent heat release in the tropics may result in the formation of double-layeredHadley circulation,so do the eddy momentum transfer processes.On the other hand,mean meridional circulations in extra-tropics are mainly determined by external momentum forcing and atmospheric properties of eddy momentum andheat transfer.     

变形岩体软弱破裂带的处理技术

在研究完成变形岩体软弱破裂带可灌性的基础上,采用旋喷注浆技术进行直接加固处理,提高破裂带的内聚力和内摩擦角,实践证明,抑制了岩体的变表,防止了滑坡的产生。     

强震作用下陡倾顺层岩质边坡失稳机制研究

安县茶坪乡冷浸沟陡倾顺层岩质边坡在\     

川东地区碳酸盐岩超压与天然气富集关系研究

地层流体超压的形成、演化及分布与油气成藏的主要石油地质过程有着千丝万缕地联系。由于碳酸盐岩本身的复杂性，其超压的成因及研究方法不能简单地借用“欠压实”的原理。本文从对比砂泥岩和碳酸盐岩在成压机理上的差异性入手，详细探讨了川东地区碳酸盐岩成压的各种机理，指出成烃作用是造成区域性超压的最主要因素；并结合该区超压平面上的分区性及纵向上的分带性，论述了各区、带超压与气藏分布的内在联系，总结出该区超压与天然气富集的关系。     

Effects of Deep Fluids on Hydrocarbon Generation and Accumulation in Chinese Petroliferous Basins

Deep fluids in a petroliferous basin generally come from the deep crust or mantle beneath the basin basement, and they transport deep substances(gases and aqueous solutions) as well as heat to sedimentary strata through deep faults. These deep fluids not only lead to large-scale accumulations of CO_2, CH_4, H_2, He and other gases, but also significantly impact hydrocarbon generation and accumulation through organic-inorganic interactions. With the development of deep faults and magmatic-volcanic activities in different periods, most Chinese petroliferous basins have experienced strong impacts associated with deep fluid activity. In the Songliao, Bohai Bay, Northern Jiangsu, Sanshui, Yinggehai and Pearl Mouth Basins in China, a series of CO_2 reservoirs have been discovered. The CO_2 content is up to 99%, with δ~(13)C_(CO2) values ranging from-4.1‰ to-0.37‰ and ~3He/~4He ratios of up to 5.5 Ra. The abiogenic hydrocarbon gas reservoirs with commercial reserves, such as the Changde, Wanjinta, Zhaozhou, and Chaoyanggou reservoirs, are mainly distributed in the Xujiaweizi faulted depression of the Songliao Basin. The δ~(13)CCH4 values of the abiogenic alkane gases are generally -30‰ and exhibit an inverse carbon isotope sequence of δ~(13)C_(CH4)δ~(13)C_(C2H6)δ~(13)C_(C3H8)δ~(13)C_(C4H10). According to laboratory experiments, introducing external H_2 can improve the rate of hydrocarbon generation by up to 147% through the kerogen hydrogenation process. During the migration from deep to shallow depth, CO_2 can significantly alter reservoir rocks. In clastic reservoirs, feldspar is easily altered by CO_2-rich fluids, leading to the formation of dawsonite, a typical mineral in high CO_2 partial pressure environments, as well as the creation of secondary porosity. In carbonate reservoirs, CO_2-rich fluids predominately cause dissolution or precipitation of carbonate minerals. The minerals, e.g., calcite and dolomite, show some typical features, such as higher homogenization temperatures than the burial temperature, relatively high concentrations of Fe and Mn, positive Eu anomalies, depletion of 18 O and enrichment of radiogenic ~(87)Sr. Due to CO_2-rich fluids, the development of high-quality carbonate reservoirs is extended to deep strata. For example, the Well TS1 in the northern Tarim Basin revealed a high-quality Cambrian dolomite reservoir with a porosity of 9.1% at 8408 m, and the Well ZS1 C in the central Tarim Basin revealed a large petroleum reserve in a Cambrian dolomite reservoir at ~6900 m. During the upward migration from deep to shallow basin strata, large volumes of supercritical CO_2 may extract petroleum components from hydrocarbon source rocks or deep reservoirs and facilitate their migration to shallow reservoirs, where the petroleum accumulates with the CO_2. Many reservoirs containing both supercritical CO_2 and petroleum have been discovered in the Songliao, Bohaiwan, Northern Jiangsu, Pearl River Mouth and Yinggehai Basins. The components of the petroleum trapped with CO_2 are dominated by low molecular weight saturated hydrocarbons.     

Enhancing the mechanical properties of marine clay using cement solidification

Abstract

The use of soft clay and dredged marine clays as the construction material is challenging. This is because the high water content, high compressibility and low permeability of the clay causing the instability of ground and structure. This detrimental effect of soft clay can be improved by the cement solidification process, which is relatively cheap and efficient. This paper mainly focuses on the study of improvement on the mechanical behavior of cement mixed marine clay. The soil is reconstituted by using ordinary Portland cement of 5%, 10%, 15% and 20% by its mass. The study reveals that cementation of clay significantly improves the peak and residual strength of soil. Similarly, the primary yield stress of the soil is also improved from 16 to 275?kPa as cement content increases from 5% to 20%, respectively. By using statistical tools, the relationships between various parameters are established, which are very important to define the mechanical behavior of the clay. This study reveals that the yield surface of the solidified marine clay is not a smooth elliptical surface. Rather it is composed of two linear surfaces followed by a log-linear surface which can be modeled by using simple parameters obtained from triaxial tests.     

Fractures: Finite-size scaling and multifractals

The distributions of contact area and void space in single fractures in granite rock have been determined experimentally by making metal casts of the void spaces between the fracture surfaces under normal loads. The resulting metal casts on 52 cm diameter core samples show a complex geometry for the flow paths through the fracture. This geometry is analyzed using finite-size scaling. The spanning probabilities and percolation probabilities of the metal casts are calculted as functions of observation scale. Under the highest stresses of 33 MPa and 85 MPa there is a significant size-dependence of the geometric flow properties for observation scales smaller than 2 mm. Based on this data, the macroscopic percolation properties of the extended fracture can be well represented by relatively small core samples, even under normal stresses larger than 33 MPa. The metal casts also have rich multifractal structure that changes with changing stress.