豫西太山庙花岗岩体特征与多金属矿产的关系

经从岩石学、矿物学、地球化学等方面对燕山期太山庙花岗岩体详细研究,认为该岩体侵入为一重要构造热事件,控制着区内多个多金属矿床的形成与规模。本文着重探讨和阐述太山庙花岗岩体特征及其对周边矿床的控矿关系。     

Mechanism for the rapid motion of the Qianjiangping landslide during reactivation by the first impoundment of the Three Gorges Dam reservoir, China

The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1, 2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not play any important role in the rapid motion in the 2003 event.     

应用生烃动力学法研究川东上二叠统烃源岩生烃史

现今川东上二叠统烃源岩生烃史研究具有局限性.首先,没有对上二叠统Ⅰ-Ⅱ1型灰岩生油、Ⅲ型泥岩的生气史分开评价;其次,海相镜质组反射率通过拟合公式换算成镜质体反射率评价烃源岩成熟度具有局限性.针对上述不足,笔者通过热模拟实验,利用化学动力学方法,标定出两类源岩生油、生气的动力学参数,并结合川东地区的埋藏史及热史,模拟出源岩有机质的成烃转化率曲线.研究表明:上二叠统灰岩、泥岩有机质在距今200 Ma和190 Ma分别进入了生油、生气门限,而在距今170 Ma和140 Ma生烃结束.     

Rock magnetic record of Cenozoic lake sediments from the Linxia basin and aridification of the Asian inland

High resolution research of rock magnetic records and quartz sands from the Maogou Section in the Linxia basin reveals that after a relatively stable environment between 13.07 Ma and 8.6 Ma, the basin was gradually influxed by eolian dusts at about 8.6 Ma, with two rapid increases at about 6.4 Ma and 5.3 Ma, respectively. The study suggests that drying of northwest China began at 8.6 Ma and strengthened rapidly at about 6.4 Ma and 5.3 Ma. __________ Translated from Marine geology & Quaternary geology, 2007, 27(4): 103–110 [译自: 海洋地质与第四纪地质]     

The paleoclimatic records and the relevance with the formation of hydrocarbon source rocks:A case study of Huanghekou depression,Bohaiwan basin

Bohaiwan basin, covering an area of 200 000 km², is one of the most important oil-bearing basins in Eastern China. Rifting processes formed the basin, and two evolution phases can be recognized. The rifting phase developed in Paleogene, and post-rifting phase occurred in Neogene. More than 200 oil fields have been found in the onshore and offshore area in Bohaiwan basin in recent years. The distribution of the oil fields is closely related to the rich hydrocarbon depressions, and the Huanghekou depression is one of these rich hydrocarbon depressions. A number of large and medium-sized oil and gas fields have been found in this area, such as BZ25-1, BZ34 etc., and the hydrocarbon was mainly from the Huanghekou depression. The formation of rich hydrocarbon source rocks depended on the tectonic setting of rapid subsidence, favorable paleoclimatic conditions and paleolimnology environments. The effects of paleoclimatic condition on hydrocarbon source rocks are the focus of this paper. __________ Translated from Geological Bulletin of China, 2007, 26(7): 830–840 [译自: 地质通报]     

四川盆地泸州古隆起嘉陵江组储层特征研究

对研究区嘉陵江组沉积背景认识的基础上,通过岩心观察、岩石薄片确定了不同类型的储集岩和储集空间,得出本地区储层岩石类型和储渗空间类型均多样化的特点。从成因角度识别出来了溶蚀孔隙型储层、膏溶孔洞型储层、裂缝型储层等三类储层。研究不同类型储层的孔、渗特征及关系表明,溶蚀孔隙型储层物性要优于膏溶孔洞型储层,而溶蚀孔隙型储层中的颗粒云岩溶蚀孔隙型储层物性最好、颗粒灰岩溶蚀孔隙型物性其次、粉晶云岩溶蚀孔隙型储层物性最差,其原因是不同储层受沉积环境和成岩作用控制和影响。     

Evolution of cool skin and direct air-sea gas transfer coefficient during daytime

Absorption of solar radiation within the thermal molecular sublayer of the ocean can modify the temperature difference across the cool skin as well as the air-sea gas transfer. Our model of renewal type is based on the assumption that the thermal and diffusive molecular sublayers below the ocean surface undergo cyclic growth and destruction, the heat and gas transfer between the successive burst events are performed by molecular diffusion. The model has been upgraded to include heating due to solar radiation. The renewal time is parameterized as a function of the surface Richardson number and the Keulegan number. A Rayleigh number criterion characterizes the convective instability of the cool skin under solar heating. Under low wind speed conditions, the solar heating can damp the convective instability, strongly increasing the renewal time and correspondingly decreasing the interfacial gas exchange. In the ocean, an additional convective instability caused by salinity flux due to evaporation becomes of importance in such cases. The new parameterization is compared with the cool skin data obtained in the western equatorial Pacific during the Tropical Ocean Global Atmosphere Coupled Ocean Atmosphere Response Experiment in February 1993. In combination with a model of the diurnal thermocline it describes main features of the field data both in nighttime and daytime. Under low wind speed conditions (< 5 m s^-1) diurnal variations of the sea surface temperature due to the formation of a diurnal thermocline were substantially larger than those across the cool skin. Under wind speeds > 5 m s^-1, diurnal variations of the surface temperature due to the variations of the thermal molecular sublayer become more important.     

Earthquake rupture complexity due to dynamic nucleation and interaction of subsidiary faults

We numerically study the dynamic interaction of propagating cracks. It is assumed that propagating cracks can nucleate and drive subsidiary cracks because of shear strain enhancement near the propagating crack tips. The critical strain fracture criterion is assumed in the analysis. Intense interaction is expected to occur among the cracks. All the cracks are assumed to be parallel and antiplane strain deformation is assumed in the computation.In the interaction of two non-coplanar cracks, a strain shadow is formed in the neighborhood of each crack because of the strain release by the introduction of the crack. The growth of each crack is accelerated when the propagating tips of each crack are outside of the strain shadow of the other crack. In general, the crack tips enter the strain shadow, and the crack tips decelerate. The calculation shows that only one of the two cracks can continue to grow, and the other's growth is decelerated and arrested. If we can assume that the suite of cracks interact in a pairwise manner only, then this may suggest that only a limited number of cracks can continue to grow during the final stage of the rupture process. Hence the crack interaction causes complexity in dynamic earthquake faulting. The concepts of barrier and asperity have been employed by many researchers for the interpretation of complex seismic wave data. However, the physical realities of such concepts are obscure. Our calculations show that dynamic crack interactions can produce barriers and asperities in some cases; the crack tip deceleration or arrest due to the interactions among non-coplanar cracks can be interpreted as being due to a barrier. The dynamic coalescence among the coplanar cracks can be regarded as an asperity.Umeda found a localized area that strongly radiates high-frequency seismic waves in the epicentral areas of some large shallow earthquakes. He defined this as an earthquake bright spot. Our analysis implies that only a limited number of cracks continue to grow when many interactive cracks nucleate, and that all other cracks stop extending soon after nucleation. Hence, if the nucleation and termination of several cracks occur in a localized area, it will be observed seismologically as an earthquake bright spot. This is because it is theoretically known that the sudden termination of crack growth and dynamic crack coalescence efficiently emits high-frequency elastic waves.     

Micromechanics of the velocity and normal stress dependence of rock friction

Among the second-order effects on friction the most important are those of variable normal stress and of slip velocity. Velocity weakening, which is usually considered the source of the stick-slip instability in rock friction, has been observed in velocity stepping experiments with Westerly granite. The friction change, , was –0.01 to –0.008 for a tenfold velocity increase. Using normal closure measurements, we observed dilation upon each increase in sliding rate. We also observed, for the first time, time-dependent closure between surfaces during static loading. The dilation that occurred during the velocity stepping experiment was found to be that expected from the static time-dependent closure phenomenon. This change in closure was used to predict friction change with an elastic contact model. The calculated friction change which results from a change in contact area and asperity interlocking, is in good agreement with the observed velocity dependence of steady-state friction. Variable normal stress during sliding has two effects, first in creating new partial slip contacts and locking some existing fully sliding contacts and second in increasing interlocking, for instance when normal load is suddenly increased. As a result, a transient change in friction occurs upon a sudden change in normal load.     

Textural segmentation of digital rock images into bedding units using texture energy and cluster labels

The texture of digital rock images, as recorded, for instance, with borehole imaging devices, is shown to reflect different bedding types. Textural segmentation of borehole images, therefore, subdivides the recorded sequence into bedding units. We show that a textural segmentation algorithm based on the concept of texture energy achieves good results when compared with synthetic as well as real data in which petroleum geologists have performed zonations on cores. Texture energy involves filtering of the original image with a set of texture sensitive masks. The filtering is done as a finite convolution over the size of the masks. On the resulting images the variance is computed over a relatively large sliding window, which, in its practical implementation, covers the full width of the image. The resulting nine one-dimensional curves are then clustered hierarchically into a user-determined number of image texture or lithological bedding classes. Principal component analysis previous to clustering can be used to reduce redundancy in the data. A recurring and relatively ill-defined problem in this field are macro-textures, i.e., the cyclic interbedding of two or more bedding types. We show that sliding Fourier transforms and variable mask scale can successfully address the zonation of macro-textures. In general, the method gives best results with mask sizes equivalent to 2–4 centimeters, reflecting the length scale at which the investigated geological bedding seems to have its highest variation.