尾砂胶结充填体蠕变模型及在FLAC3D 二次开发中的实验研究

关于岩石蠕变特性的研究已有诸多成果,但对胶结充填体的蠕变特性还缺乏系统地研究。在室内充填体单轴蠕变试验的基础上,利用Hoek-Kelvin模型表征充填体的蠕变特性,运用粒子群优化算法,对选用的蠕变模型的参数进行辨识,并研究各蠕变参数对应力水平的敏感程度。研究结果表明,在不同分级应力水平加载下,弹性模量EH和黏滞系数η变化较小,而参数EK对应力水平变化较敏感。利用FLAC3D软件二次开发所建立的蠕变模型,用开发的模型进行分级加载蠕变的数值模拟,计算结果与试验数据吻合。     

横流中多孔射流流动特性实验研究

横流中多孔射流的流动特性是揭示其输移扩散机理的基础。利用粒子图像测速技术PIV测量了横向流动条件下单孔、两孔和四孔射流的速度场,对射流主体范围内、射流的迎流面和各个射流之间的流场进行了研究。实验研究表明,多个射流中的第1个射流迎流面卷吸强度明显大于单个射流情况;两个射流之间的区域可分为两个部分,上游部分水体被卷吸进入上一个射流,下游部分水体被卷吸进入下一个射流;后面射流迎流面的横向流速明显低于第1个射流迎流面的横向流速,揭示了导致后面射流弯曲的横向有效流速沿程发展变化过程;揭示了横向有效流速的沿程变化规律。     

Inter‐instrument comparison of particle‐size analysers

This paper presents a methodological framework for inter‐instrument comparison of different particle‐size analysers. The framework consists of: (i) quantifying the difference between complete particle‐size distributions; (ii) identifying the best regression model for homogenizing data sets of particle‐size distributions measured by different instruments; (iii) quantifying the precision of a range of particle‐size analysers; and (iv) identifying the most appropriate instrument for analysing a given set of samples. The log‐ratio transform is applied to particle‐size distributions throughout this study to avoid the pitfalls of analysing percentage‐frequency data in ‘closed‐space’. A Normalized Distance statistic is used to quantify the difference between particle‐size distributions and assess the performance of log‐ratio regression models. Forty‐six different regression models are applied to sediment samples measured by both sieve‐pipette and laser analysis. Interactive quadratic regression models offer the best means of homogenizing data sets of particle‐size distributions measured by different instruments into a comparable format. However, quadratic interactive log‐ratio regression models require a large number of training samples (n > 80) to achieve optimal performance compared to linear regression models (n = 50). The precision of ten particle‐size analysis instruments was assessed using a data set of ten replicate measurements made of four previously published silty sediment samples. Instrument precision is quantified as the median Normalized Difference measured between the ten replicate measurements made for each sediment sample. The Differentiation Power statistic is introduced to assess the ability of each instrument to detect differences between the four sediment samples. Differentiation Power scores show that instruments based on laser diffraction principles are able to differentiate most effectively between the samples of silty sediment at a 95% confidence level. Instruments applying the principles of sedimentation offer the next most precise approach.     

青岛市环胶州湾各河流输沙特征分析

通过对青岛市环胶州湾各河流上的水文站历年含沙量、输沙量资料分析计算,推求出各河流的入海输沙量,并对输沙特征进行分析评价,最后得出以下以下结论:(1)从空间分布来看,胶州湾河流输沙主要来自胶州湾西北部和东北部。(2)河流属中沙河流。河道上游多年平均含沙量和输沙模数均大于河道中下游。(3)输沙量年际变化较大,最大年输沙量是最小年输沙量的518.7倍,且年降水量较大时,年入海水量也较大,年输沙量也较大。(4)河流悬移质颗粒特征为河流从源头到河口,泥沙粒径是不断减小。     

能谱仪PPA分析方法的实验研究: 以山西大同新生代玄武岩样品为例

以山西大同新生代玄武岩样品为例, 利用Quanta 200扫描电镜、GENESIS能谱仪对能谱仪PPA分析方法进行了实验研究, 该方法为粒度和物相自动分析方法.笔者首次把能谱仪PPA分析方法应用到地质学领域的岩石光薄片研究中, 快速得出了一系列不同物相的形态学数据及化学成分分析结果: 物相种类、每一种物相的颗粒数、每一个颗粒的平均直径、面积、周长、圆度、长宽比及化学成分等, 并得出了不同物相在该视域所占的面积百分比及每种物相颗粒的平均直径, 克服了传统光薄片粒度分析方法的所有缺点, 为矿物学、岩石学及矿床学研究提供了一套非常有意义的数据.      

沙泉子隐伏铜镍矿地球化学勘查方法试验

在沙泉子铜镍矿上方,开展土壤微细粒全量测量、金属活动态(粘土吸附态)测量及地电化学测量的试验工作。试验结果显示,三种方法圈定的成矿元素地球化学异常分布范围与深部隐伏矿体较为吻合,表明土壤微细粒全量测量、粘土吸附态测量和地电化学测量可以有效地指示隐伏铜镍矿体,可作为该区寻找隐伏铜镍矿的有效手段。     

边界问题及其对真空预压的影响

给出了真空预压区四周开敞式与封闭式边界定义、两者的不同,分析了开敞式边界加固效果优于封闭式边界的原因并以三个实例说明之,给出如何将封闭式转化为开敞式的方法;柔性与刚性密封膜同样可构成开敞式与封闭式边界,讨论了此时两种边界下差别;给出了密封墙和支挡墙的定义、功能、应用范围;讨论了水泥搅拌与旋喷桩单体墙与格栅墙的定义、功能、应用范围,前者只能作为密封墙,后者既可作密封墙也可作支挡墙.     

Characteristics of modern atmospheric dust deposition in snow in the Mt. Yulong region,southeastern Tibetan Plateau

We evaluated the concentration, size and distribution, and temporal variation of insoluble dust micro-particles in the snow, rainfall and water taken from the areas surrounding the Mt. Yulong to define the characteristics of modern atmospheric dust deposition and the contributions of different dust sources. The mean mass concentration (4511 μg kg⁻¹) of micro-particles with 0.57 < d < 26 μm, and the diameter (11.5 μm) of dust contained in the water bodies of the Mt. Yulong are roughly similar to those observed in other sites, implying that dust is primarily supplied through short-range transport from proximal source regions (several or hundreds of km distances). The mean mass concentrations of micro-particles with 0.57 < d < 26 μm is lower in the rainfall than in the snow and the river water, suggesting the rain water is an ideal source/carrier for detecting the characteristics of modern atmospheric micro-particles. Volume size distributions of micro-particles in the snow and water showed single modal structures having volume median diameters from 3 to 26 μm. Number concentrations of micro-particles in the snow were higher than that in the rainfall, the river water contains the least amount of micro-particles. Vertical profiles of the snowpits show that there is a strong lateral correlation among the dust peaks, indicating a regional uniformity of dust deposition and suitability of snow analysis for dust deposition. In addition, the bare rock of snow-free terrain in the Mt. Yulong region and the mineral particles from local rock weathering are also important sources for the dust deposition.     

含钙铝铁水解聚合产物的矿物学研究Ⅲ:陈化对形态的影响

用透射电镜、扫描电镜、热分析及矿物谱学等手段对含钙铝铁水解聚合产物(含微量硅)合成初期样品及其陈化9年后样品组成物相的形态演化进行了观察对比研究。结果表明,含钙铝铁溶液合成初期迅速形成类钙矾石双羟合结构体,其结构中部分Al3+被Fe3+取代、SO42-阴离子被Cl-离子替代,无定形的铝铁共聚物、铝硅共聚物和多种铝、铁、钙氢氧化物(氧化物)微晶竞争存在。缺氧条件下铝铁水解产物的演化由于氯、钙离子的存在而与文献的报道有所不同。陈化改变了含钙聚合铝(铁)溶液中的长程有序结构。其中的类钙矾石双羟合结构体在高Cl-、低pH环境下长期陈化过程经历了溶解-再结晶作用。大量的铁微晶相溶解形成富铝水羟合铁(ferrihydrite)胶体结构,Cl-与Ca2+以键合或共沉淀方式进入富铝水羟合铁(ferrihydrite)相。富铝水羟合铁(ferrihydrite)胶体最终的结晶相还是β-FeOOH。     

A generalized rigid particle contact model for fracture analysis

Rigid particle models taking directly into consideration the physical mechanisms and the influence of the material meso‐structure have recently been developed for fracture studies of quasi‐brittle material such as concrete. The formulation of a generalized contact model for rigid particle simulations is presented in which the contact discretization is a model parameter. The contact model performance for different discretizations is evaluated for uniaxial tensile tests, for uniaxial compression tests and for a notched beam in mode I. Copyright © 2005 John Wiley & Sons, Ltd.