单只桶基安全负压沉贯操作方法物模试验初探

提出了由物质试验方法初步选择的一种可操作的单只桶基安全负压沉贯操作程序,它可作为试验室内多桶基导管架物模试验以及海上（近）原型尺度桶基试验实施负压沉贯操作方法的试验依据,通过对这些试验及其操作程序的修正和完善,可为实际桶基实施海上沉贯作业出一种可靠,安全的操作程序或方法。     

Estimation of maximum scour depth around bridge piers under ice-covered conditions using data-driven methods

The scouring around bridge foundations is a significant concern in civil engineering. Several research has been conducted experimentally and numerically to study the maximum scour depth around the foundations of a bridge in open channel conditions. In cold regions, where ice forms on lakes, reservoirs, and rivers, the interaction between ice and hydraulic structures is further complicated. The flow distribution varies significantly leading to deeper and larger scouring around bridge foundations....     

On the seismic performances of rigid block‐like structures coupled with an oscillating mass working as a TMD

In this paper, the effects of a mass damper on the rocking motion of a non‐symmetric rigid block‐like structure, subject to different seismic excitation, are investigated. The damper is modelled as a single degree of freedom oscillating mass, running at the top of the block and connected to it by a linear visco‐elastic device. The equations of rocking motion, the uplift and the impact conditions are derived. A nondimensionalisation of the governing equations is performed with the aim to obtain an extensive parametric analysis. The results are achieved by numerical integration of these equations. The slenderness and the base of the rigid block, and the eccentricity of the centre of mass are taken as variable parameters in the analyses. The main objective of the study is to check the performance of the damper versus the spectral characteristics of the seismic input. Three earthquake registrations with different frequency contents are used in the analyses. The results show that the presence of the mass damper leads to different levels of improvement of the response of the system, depending on the spectral characteristics of the seismic input. Curves providing the overturning slenderness of blocks of specific sizes versus the characteristics of the TMD are obtained. Copyright © 2017 John Wiley & Sons, Ltd.     

地震作用下双薄壁高墩刚构桥桥台处的碰撞效应及减碰措施

针对双薄臂高墩连续刚构桥两侧桥台处主梁与背墙的碰撞现象,基于桥台-背土作用简化模型和Kelvin碰撞模型,采用非线性时程法研究碰撞对双薄臂墩地震剪力、弯矩、曲率和位移,以及支座纵向变形的影响。提出可牺牲背墙、阻尼器、加强型横系梁等三种减碰措施,并对比分析其减碰效果。研究表明:碰撞会显著增大高墩的地震内力和曲率响应,降低墩顶位移和支座的纵向变形;碰撞刚度的变化对碰撞效应的影响在20%以内;可牺牲背墙和阻尼器两种减碰措施均可大幅降低桥墩的地震内力和曲率,使其接近不考虑碰撞时的状态,阻尼器同时还可以保护支座不超过容许变形,而可牺牲背墙则会导致支座的地震破坏;加强型横系梁不能发挥减碰作用,反而会增大桥墩的地震响应。     

高烈度区大跨刚构-连续梁桥地震响应分析

为研究大跨刚构-连续梁桥在高烈度地区的地震响应,选取羊记沟左线大桥为工程背景,利用Midas软件建立多个有限元模型,考虑纵、横桥向的水平地震波输入,比较反应谱与时程分析结果,获得结构动力响应特点,为大跨刚构-连续梁桥的抗震设计提供参考依据。结果表明:刚构-连续体系仅单墩刚构时不宜采用反应谱分析,高烈度地区桥梁进行地震响应时程分析时,选用与场地适应的地震波的同时,应考虑采用本地地震参数转化人工波作为地震激励源。桥墩不等高时,可通过改变墩截面形状及其与主梁连接方式调节内力分布,避免矮墩刚度大导致的内力集中。     

Model for multiblock columns subjected to base excitation

A new model is presented for multiblock columns subjected to earthquakes, which contains an impact and an opening model. Both in the impact and in the opening model, all the possible opening configurations are investigated because it was found that in many practical cases, unexpected patterns may occur. The model is purely mechanical: assuming rigid blocks and classical (inelastic) impact. The effect of energy dissipation during impact was investigated. Using our model in accordance with the literature, it was found that monolithic blocks are more vulnerable to overturning than multiblock systems.     

基于cut-off方法刚性承台下群桩基础优化分析

针对刚性筏板下群桩基础优化设计问题进行分析,通过改变桩长分布来调整各桩的荷载分担,群桩分析采用基于弹性理论的积分方程方法,并通过cut-off方法来反映桩的弹塑性特性,实现群桩基础的弹塑性优化分析,改进了常规弹性分析方法的缺陷。算例分析表明,随着外荷载的不断增加,角桩首先达到极限荷载,对角桩超出极限荷载的部分进行重新分布,继而使得边桩逐渐达到极限承载状态,继续加载直至内桩也达到极限承载状态,从而引起桩筏基础的整体破坏。采用cut-off方法可以改进基础变刚度优化设计,使之与实际情况更为吻合。     

Introduction to dynamics of stone arches

The dynamic analysis of stone arches, made up of rigid voussoir laid dray, can be performed in two phases. First of all the value of the horizontal acceleration necessary to turn the structure into a mechanism and the corresponding mechanism must be determined. Then the dynamic behaviour of such a mechanism under a given acceleration time history can be studied. The first step is a static matter. The second one requires the solution of the non-linear equation of motion of the one-degree-of-freedom system in which the arch is turned. In this paper an iteration procedure is proposed to find out the mechanism. Then the structural behaviour of the mechanism is analysed. Both free and forced vibrations are investigated and the study is limited to the first-half cycle of vibration. Damping is not considered and sliding between the blocks at the hinge sections is not allowed. © 1998 John Wiley & Sons, Ltd.     

任意刚性基础竖向动阻抗的简化计算

对于均质弹性半空间上的任意形状的刚性明置和埋置基础,其动刚度和阻尼系数的确定,已有很多这方面的研究。通常基础的任意形状用其外包的规则几何形状代替原有的不规则基础形状,以达到确定动刚度和阻尼系数的目的,而且这两个参数的确定仅仅是对单独刚性基础的,无法考虑相邻基础对其产生的影响。针对上述两方面不完善之处作了进一步探讨,引入相邻基础动力相互作用因子的概念,并利用地基为平面应变假定以求之。推荐的方法经验证,非常准确。     

UPPER BOUND SOLUTION FOR PULLOUT CAPACITY OF ANCHORS ON SANDY SLOPES

By making use of limit analysis, an upper bound solution in a closed form for determining the ultimate pullout capacity of plate anchors buried in sandy slopes has been established. The anchor plate orientation has been considered either horizontal or parallel to the slope, with the pullout force applied perpendicular to the plate. It has been found that the pullout capacity for horizontal anchors, even on slopes, remains the same as that on horizontal ground surface as long as the average embedment ratio is kept constant. Whereas for anchors which are aligned parallel to the slope the collapse load decreases continuously with the increase in the inclination of slope. © 1997 John Wiley & Sons, Ltd.