基于静风期污染物的PM2.5排放清单空间精细化方法

有利气象条件之后的静风期,极大降低了PM_2.5跨区域传输的影响,能够揭示本地源的排放状况。本文尝试性引入了静风期污染物分布揭示本地源排放特征的概念,提出了一种基于遥感数据的PM_2.5排放清单空间精细化方法：首先,利用 MODIS MCD19A2反演的ChinaHighPM_2.5数据,构建高时空分辨率PM_2.5数据融合方法;然后,构建唐山市有利气象条件之后的静风期污染物遴选方法（合理风向和风速：有利气象条件为东风,地面10 m高度风速大于3 m/s,其他风向,持续的较大风力5~10 m/s;静风期风速小于1.5~2.0 m/s）;其次,基于遴选的静风期PM_2.5数据分配MEIC清单中的PM_2.5总排放量,同时对比传统插值方法：基于GDP、人口密度、路网、土地利用类型数据,实现清单各污染源PM_2.5的1 km×1 km空间分配;最后,利用WRF-CMAQ模拟数据和地面台站实测数据进行真实性检验。研究结果表明：① PM_2.5数据填补融合方法能够有效提高PM_2.5监测数据的时空分辨率,且与地面监测值显著相关（R²=0.94,RMSE=4.64 µg/m³,NMB=2%,NME=7%）;② 引入有利气象条件后的静风期概念,提出了静风期污染物的遴选方法,有效降低了PM_2.5跨区域传输的影响,更好地反映了本地源排放的空间分布特征;③ WRF-CMAQ模拟方法的精度验证结果表明,该方法较传统面积插值法NME降低7%,NMB降低10%,RMSE降低1.54 µg/m³,R²提高11%。该方法为排放清单的空间精细化提供了新的研究思路。     

重庆市似大地水准面精化及模型精度检测

介绍了重庆市似大地水准面精化的基本情况,并对精化成果的内符合精度以及外符合精度进行了分析,比较了不同GPS观测时间长度、静态GPS测量和结合CQCORS系统的网络RTK测量的检核精度。结果表明,重庆市似大地水准面精化成果内符合精度较高,主城都市区及区县城市外符合精度较高,能够满足四等三角高程测量精度要求,其余地区满足图根等级高程测量或碎部点高程测量精度要求。     

基于EGM2008重力场模型的松原灌区大地水准面精化

以松原灌区GPS控制网为例,采用高程异常直接拟合和插值法,以及基于EGM2008重力场模型和移去-计算-恢复技术的残差二次曲面拟合和插值法,精化了测区大地水准面。首先简要介绍了研究区数据,进而探讨了高程异常的获取,在此基础上,详细介绍了二次曲面拟合的大地水准面精化和空间插值法大地水准面精化方法,结果表明,EGM2008重力场模型精度较高,对精化局域和国家大地水准面具有重要意义。     

金枪鱼油的精炼工艺对脂肪酸组成的影响

粗鱼油通过精炼可以除去非甘油三酯杂质成分，研究表明黄鳍金枪鱼鱼油精炼的工艺参数为：800g，L的H3PO4脱胶，添加量为油量的1％（体积分数）；300g／L的Na0H脱酸，添加量为油量的2％（体积分数）；活性土脱色。添加量为油量的10％（质量分数）；85℃下减压蒸馏脱臭15min。经过精炼，鱼油呈淡黄色，澄清透明，有淡鱼腥昧，理化指标达到鱼油SC/T3502—2000标准的精制鱼油一级要求，精制鱼油中PUFA的总含量（w）达37．06％，DHA和EPA含量（w）分别为25．10％和4．45％。     

CONDITION NUMBERS, ITERATIVE REFINEMENT AND ERROR BOUNDS

Concentration estimates of components present in a sample mixture can be obtained using matrixmathematics. In the past, the condition number of the calibration matrix has been used to give anamplification factor by which uncertainties in data can work through to errors in the concentrationestimates. This paper explores an additional interpretation of condition numbers with regards tosignificant figures and rounding errors. A procedure is suggested which will always give the most accurateconcentration estimates provided the calibration matrix is not too ill-conditioned. Condition numbershave also been used by analytical chemists to discuss the error bounds for concentration estimates.Unfortunately, only one representative error bound can be approximated for all the components. Thispaper will show how to compute bounds for individual concentration estimates obtained as solutions to asystem of m equations and n unknowns. The procedure is appropriate when calibration data and sampleresponses are inaccurate.     

Quantification of mass transfers and mineralogical transformations in a thrust fault (Monte Perdido thrust unit,southern Pyrenees,Spain)

In fold-and-thrust belts, shortening is mainly accommodated by thrust faults which are preferential zones for recrystallisation and mass transfer. This study focuses on a detachment fault related to the emplacement of the Monte Perdido thrust unit in the southern Pyrenees. The studied fault zone consists of a 10 m thick intensively foliated phyllonite developed within the Millaris marls, of Eocene age. The lithological homogeneity of the hanging wall and footwall allows us to compare the Millaris marls outside the fault zone with the highly deformed marls located in the fault zone and to quantify the chemical, mineralogical and volumetric changes related to deformation processes along the fault.The Millaris marls are composed of detrital quartz, illite, chlorite, minor albite and pyrite, in a micritic calcite matrix. In the fault zone, the cleavage planes are marked by clay minerals and calcite ± chlorite veins attest to fluid–mineral interactions during deformation.The mineral proportions in all samples from both the fault zone and Millaris marls have been quantified by two methods: (1) X-ray diffraction and Rietveld refinement, and (2) bulk chemical analyses as well as microprobe analyses to calculate modal composition. The excellent agreement between the results of these two methods allows us to estimate mineralogical variations using a modification of the Gresens' equation. During fault activation, up to 45 wt% of calcite was lost while the amounts of quartz and chlorite remained unchanged. Illite content remained constant to slightly enriched. The mineralogical variations were coupled with a significant volume loss (up to 45%) mostly due to the dissolution of micritic calcite grains. Deformation was accompanied by pressure solution and phyllosilicates recrystallisation. These processes accommodated slip along the fault. They required fluids as catalyst, but they did not necessitate major chemical transfers.     

Adaptive mesh refinement for storm surge

An approach to utilizing adaptive mesh refinement algorithms for storm surge modeling is proposed. Currently numerical models exist that can resolve the details of coastal regions but are often too costly to be run in an ensemble forecasting framework without significant computing resources. The application of adaptive mesh refinement algorithms substantially lowers the computational cost of a storm surge model run while retaining much of the desired coastal resolution. The approach presented is implemented in the GeoClaw framework and compared to ADCIRC for Hurricane Ike along with observed tide gauge data and the computational cost of each model run.     

基于VRS系统建立城市三维大地测量基准

介绍了以VRS技术为基础的苏州GPS连续参考站系统的建设,并结合(似)大地水准面精化的成果与EGM96,建成了高精度、动态的三维基准,实现了苏州地区的坐标基准的统一。     

Refinement of thrust faulting models for the Central New Madrid seismic zone

We present the results of the joint relocation of events recorded during 1989–1992 by the PANDA network in the central New Madrid seismic zone. The near-surface material in the study area is a gently-dipping layer of poorly consolidated sediments with low P-wave velocity and high V_p/V_s (estimated values: 1.8 km s⁻¹ and 3). The sediments are underlain by high-velocity Paleozoic rocks. Under the network the difference in sediment thickness is only 0.6 km, but because of the low velocities the location of the events using layered models is affected by errors. Application of the joint hypocentral determination (JHD) technique to a subset of 580 events shows that the single-event locations may be in error by as much as 1 km in depth, depending on where the events are located. Analysis of synthetic data generated for a realistic 3-D velocity model supports the JHD results. The analysis of synthetic data also suggests that a V_p/V_s≤ 2.3 is more appropriate for the post-Paleozoic Mississippi embayment sediments. Based on the JHD locations we present a new interpretation of the seismicity, with two en-echelon SW-dipping thrust faults connected by a west-dipping thrust fault. These faults appear associated with the Reelfoot scarp and its northern extension, the Kentucky bend scarp.     

Crystal structures of iron bearing tetrahedrite and tennantite at 25 and 250°C by means of Rietveld refinement of synchrotron data

Rietveld refinement of X-ray synchrotron data was performed for two synthetic tetrahedrite samples, with 0.61 and 1.83 Fe atoms, and two synthetic tennantite samples with 0.10 and 1.23 Fe atoms p.f.u. M₁₂(Sb,As)₄S₁₃. Measurements were performed at 25 and 250°C. For both the phases, increased Fe substitution is reflected in the increased tetrahedral ‘Cu1’–S distance (‘Cu1’ is a site of Fe substitution) and Cu2–S distances. Cu2 was refined as a split position; the Cu2–Cu2 split about the plane of the S1₂S2 triangle is about 0.56 and 0.65 Å for tetrahedrite and tennantite, respectively. Cu2–Cu2 distances in the structure cavity are 2.8–2.9 Å. Between 25 and 250°C, the lattice parameter a increased by 0.02–0.04 Å and the interatomic distances by 0.01 Å on an average. Thermal expansion coefficients of little-substituted samples are similar to those of unsubstituted samples, whereas thermal expansion appears to decrease with increasing substitution by Fe. The Cu2–Cu2 split increases at 250°C by about 0.1 Å for tetrahedrite and by more than 0.15 Å for tennantite but the cage expansion is minimal so that the Cu2–Cu2 distances in the cavity decrease with temperature. Difference Fourier maps indicate that there is little residual electron density left between the two Cu2 half-sites in tetrahedrite but this inter-site density is substantially higher in tennantite. It increases with temperature, especially in the little-substituted tennantite sample.