横向各向同性介质中的弹性波方程逆时偏移及其成像条件

作者在本文中导出了在横向各向同性介质情况下，二维弹性波逆时传播的高阶差分格式，实现了弹性波在数值空间中的逆时延拓，从snell定量出发，采用插值法求取网格空间中各点的直达波旅行时，以此作为弹性波逆时偏移的成像条件，实现多波多分量资料的逆时偏移，数值试验表明，逆时偏移能够使地表接收到的波场准确归位，提高资料处理的精度。     

结构动力反应分析中的一种显式输入反演方法

本文简要总结，评述了结构动力反应分析中两类输入反演方法（脉动函数法和直接时域法）的优缺点，在此基础上通过应用文献[1]中提出的3阶显式方法，获得了一个关于结构输入反演问题的新解法－显式直接时域法，新方法集合了脉冲函数法和直接时域法的优点，既可按显式求解动力微方程，又适用于非线性系统的动力反演问题，最后，通过算例对该方法进行了数值验证。     

气举反循环钻深度的理论计算与加深试验

运用气举反循环钻进、在满足一定条件下适当增加双壁钻具长度即可得到较大钻进孔深，本文通过理论计算及实验，证实了使用现有设备，气举气循环可以更好的满足超午米深水井的施工要求。     

孵漂石地层大口径钻头与钻进工艺的选择

根据工程实例，通过钻头和钻进工艺的对比试验，得出了利用大直径滚刀钻头，在致密卵漂石地层施工中大口径桩孔，能大幅度提高钻进效率。     

Development of grabens and associated fault-drags: An experimental study

Experiments on extensional faulting were performed with semi-brittle talc-sand beds resting on a ductile clay base. The experiments show that the development of graben in the talc-sand beds is controlled by the deformation in the ductile basement. Graben-like structures form only when there is a non-uniform stretching in the basement. Uniform extension at the basement level fails to produce any such structures. Grabens initiate as large synclinal structures (sag). The sag is generated either by a downward flexing of the talc-sand bed on a ductile basement or by non ****-uniform thinning of beds. Listric master faults bounding the grabens intersect the basement at high angles. The master faults that initiate as curved shear planes rotate further with continued extension. At the initial stage, the graben structures are associated with normal drags, and with progressive deformation, drag patterns change from normal to a reverse one.     

SVD迭代模型在夏季降水预测中的应用

文中设计了一种基于SVD迭代的短期气候预测模型,通过选择适当的影响因子,建立与预测对象之间的联系,从而实现对气象场序列的预测。分别对华北16个测站和长江中下游地区30个测站1991—2000年近10a夏季(6—8月)降水做预测试验,平均均方误差分别为0.352和0.312,平均符号相关系数分别为0.575和0.623。此研究表明,基于SVD迭代的气候预测模型是一种非常有效的短期气候预测途径,具有很强的应用价值。     

Seismogenic destruction of the Kamenka medieval fortress, northern Issyk-Kul region, Tien Shan (Kyrgyzstan)

A paleoseismological study of the medieval Kamenka fortress in the northern part of the Issyk-Kul Lake depression, northern Tien Shan in Kyrgyzstan, revealed an oblique slip thrust fault scarp offsetting the fortification walls. This 700 m long scarp is not related to the 1911 Kebin Earthquake (Ms 8.2) fault scarps which are widespread in the region. As analysis of stratigraphy in a paleoseismic trench and archaeological evidence reveal, it can be assigned to a major twelfth century a.d. earthquake which produced up to 4 m of oblique slip thrusting antithetic to that of the nearby dominant faults. The inferred surface rupturing earthquake apparently caused the fortress destruction and was likely the primary reason for its abandonment, not the Mongolian–Tatar invasions as previously thought.     

The effects of rock fragments on hydrologic and hydraulic responses along a slope

A model describing the three‐dimensional matrix flow along a slope with rock fragments or impermeable blocks was developed. The model was combined with modified Picard's iteration to ensure mass conservation in the unsaturated flow. We found that rock fragments obstruct water flow along the slope. The groundwater table must be raised to provide a sufficient pore water pressure gradient to facilitate water flow, but higher pore water pressure may induce slope failure. We also conducted a bench‐scale laboratory flume experiment to examine the effects of impermeable blocks on downstream seepage flow. In addition, a numerical experiment was conducted to examine how different arrangements of impermeable blocks affect downstream seepage flow and pore water pressure. This research demonstrated that the hydraulic phenomena were affected when impermeable blocks were present, and pore water pressure increased as the position of impermeable blocks was lowered. Copyright © 2006 John Wiley & Sons, Ltd.     

一种高效的迭代OFDM频偏估计算法

提出了一种改进的正交频分复用（Orthogonal Frequency Division Multiplexing,OFDM）载波频率偏移估计算法并通过MATLAB进行仿真.仿真结果表明算法对小数载波频率偏移估计精度高并且其算法复杂度低.     

数字抽取滤波器的DSP优化设计

为了降低地震数据采集系统的成本和功耗，采用数字信号处理器（DSP）实现∑-△模数转换器中的数字抽取滤波器算法。通过采取查表法、倒序循环遍历法以及模拟循环寻址法等优化方法，以较低工作频率实现了四通道四级抽取滤波运算，达到了系统设计的要求。